Creality Laser Engraver Enclosed, Falcon2 Pro 40W Output Laser Cutter, 25000mm/min Speed Laser Cutter Machine with Air Assist, Auto Fan, Camera Positioning for Wood and Metal
$1,899.00
Related Products
From the brand
Creality focuses on Laser Engraving machines and peripheral accessories.The Laser engraver is put into the market. Currently on sale are Falcon/Falcon A1/A1 Pro/Falcon2/Falcon 2 Pro series.
Creality also offer engraving machine peripheral accessories and consumables to assist your engraving creations.
New Arrivals
Creality Falcon A1 Pro 20W
New Arrivals
Creality Falcon2 Pro S 40W
Falcon 2 Pro
Falcon A1
Smoke Purifier
Laser Rotary Roller
Accessory
Accessory
【Creality Updated Falcon2 Pro】Pro 40W laser engraver with its own fully transparent protective laser enclosure, and when the lid is closed, the built-in fan,LED work light and air-assist will automatically start working. Also comes with an metal steel bar support and tray for perfect replacement of honeycomb table. It also comes with a 1.6W module that allows you to accomplish finer engraving tasks.This laser engraver truly allows engraving enthusiasts to create all-in-one creations.Laser Class:Class 1.
【Powerful 40w Laser Output&High Speed】 Pro 40W engraver has max 240w machine power and 40000mw output power,It can cut a 20mm basswood board,30mm black acrylic or 0.15mm stainless steel sheet in one pass, at a speed up to 25000mm/min,with 2x faster engraving speed, you can complete your engraving artwork quickly and well.
【Precisely Engraving & Cutting】 Falcon 2 Pro Laser Engraver has precision craftsmanship with both engraving and cutting.Using the fast mode for engraved painting and the slow mode for cutting.The machine with all aluminum alloy made structure and steel shaft wheel guide rail and 0.06*0.1mm super fine spot focus, enable engraving&cutting accuracy precisely controlled within 0.003 inches.
【Absolutely Safe】When the lid is closed and the machine starts working,the fan and air assist will start working at the same time, and the laser module has 3 indicator lights (airflow monitor/lens monitor/flame monitor) will light up, so that you can monitor the progress of the engraving at any time to see if it is normal. The machine stops working when the lid is opened or the tray is pulled out, or if the machine is accidentally, tipped over or dropped, the buzzer and indicator lights will sound an alarm. The machine is equipped with a safety lock and an emergency stop button, so that if an emergency occurs during operation, the machine can be stopped manually immediately.
【New Camera Positioning】Falcon2 Pro series engraving machine new camera positioning function, you need to connect to the computer, follow the installation steps to set up the parameters related to the camera, you can call up the camera on the software to use (only connect to the computer to use). The camera function can provide better pattern positioning, and more games are expected to be unlocked by the enthusiasts.
【Easy To Operate】Falcon2 Pro Laser Engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data TF card and use Creality laser cutter and engraver machine anytime and anywhere.One-button management make it so easy for you to use anywhere and anytime.
【The Best Gift】Creality Falcon / Falcon 2 / Falcon 2 Pro series of engraving machine are the realization of the perfect combination of wisdom and creativity of the vehicle, men’s imagination and hands-on ability in the engraving machine as a vehicle can be used in the best way. So this is the best gift for your father/friends/DIY fanatic.
8 reviews for Creality Laser Engraver Enclosed, Falcon2 Pro 40W Output Laser Cutter, 25000mm/min Speed Laser Cutter Machine with Air Assist, Auto Fan, Camera Positioning for Wood and Metal
Add a review
$1,899.00
Ron –
What a Machine!!!
After a lot of research. I finally settled on this machine, mostly because the other UV laser O was considering, which also advertised a 20 to 60 watt power range, wasn’t yet released. Also, it came with 3 separate heeds, and they weren’t very clear on whether or not the machine actually came with the 60 watt head.That aside, there are a few things I would like to see changed orimproved on this machine. But overall, it cuts like a champ!I cant’s believe how much this machine has decreased my cutting time!So, a quarter inch piece of wood which need to require 2 or 3 cutting passes, now it is easily cut through in just one pass, even with only the 40 wall power range selected. Plus the fact that this is an enclosed machine, with its own went ventilation fan, means this unit can be used indoors, if need be.I can’t say enough about how well this ant cuts all materials, including opaque plexiglass.Also the power selection of 20 watts, 40 watts, or 60 watts, is only a matter of an easy push of a button, which is right there on the very top of the power head.
Bill –
So far it’s working very well
Used to both cut and engrave mostly wood and some fabric projects and it has met our expectations. It took some time to assemble but it went smoothly. Seems to be a quality machine.
watson –
Failed
The quality appears good, not cheap in any way. The unit was carefully assembled, but did not work properly. When powered up, the gantry would go all the way to one side and grind against the stop. After trying to check calibration and such, I finally just took it apart, repacked it, and sent it back.
IAMINFIN8T –
Good beginner laser engraver
First thing I think that they did a decent job with the build quality on this machine, it feels solid except for the covers. The camera seems a bit off no matter how much i calibrate this thing and I just cant get it right. The software that comes with it needs some work but it works good, reminds me somewhat of cricut design space. I’ve tried both the default software and Lightburn, I prefer lightburn but the software that they make is really good and I think if they do some updates it will be a great program. For my use I think it is a good buy and good value for money, simple to use with some bugs here and there but if your just getting started with lasers this might be a good buy in my opinion. the enclosure and the ability to look at the work being done is pretty cool in my book. wireless capability would have been awesome and i wish they had implemented this as i don’t like having cables running to my laptop.
Rodney B May –
Works very well
Very nice. Well worth the extra money over the Falcon2 (not pro version ).
Froland –
Easy to use
I own a flower shop & boutique. We purchased this laser engraver to help make some of the products we were buying for our floral arrangements & boutique items. For our florals shop we use a lot of wooded boxes for certain arrangements, by us being able to make them we are able to personalize the boxes for holidays or funerals.
Wilfredo lugo –
It does what is meant to do
It work great
Elizabeth F. –
Love it
We having so much fun love it