Mini Metal Lathe Machine CNC DIY Tool Benchtop Wood Lathe Woodworking for Hobby Sience Education Modelmaking, AC110V 50/60HZ
$199.99
Related Products
Product description
Applications:
School General Technical Room, Science and Technology Activity Room Equipment, Science and Technology Museum Student Science. It is helpful for improving manual ability and independent thinking, thus effectively improving the intelligence of children. So as to be a good didactical tool for children. Wear goggles when using. Children need to be guided by adults.
Note Processing ability: It can process wood, plastic and soft metals (pure copper and pure aluminum).CAN’T Processing Alloy, brass rod.
About Received Customer Feedback–Our Reply:
1. Precision problem:
This machine is a micro lathe and cannot achieve very high precision. Please check the size of the accessories. If you have requirements for high precision, please consider purchasing carefully.
2. Chuck swing problem:
It is because of the vibration of the motor. Because it is a micro lathe, it is small and light, so it will vibrate slightly, but this is within the normal range.
3. Tool version off-center:
Maybe the tip of the knife is not centered. This can be solved by raising the height of the turning tool, that is, adding a spacer under the blade.
Parameter:
Input voltage: AC100V~240V 50/60HZ ；Output voltage : DC12V 3A/4A ；Motor rated power: 24W
Motor speed: High speed motor 18000r/min±15%
Low speed motor: 10000r/min±15%
Spindle speed: high speed motor 3000r/min±15%
Low speed motor: 1600r/min±15%
Spindle jump: <0.1mm
Large slider stroke（Z axis）: 45mm
Small slider stroke（X axis）: 35mm
Center height: 25mm
Center distance: 110mm
Turning tool size: 3.5*3.5mm
Maximum processing diameter: 13mm positive claw, 45mm reverse claw
Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw
Handle scale: 0.1mm/division
SIZE: 10.94 x 3.94 x 5.91 INCH
Package Include： 1 x Lathe
Set of Accessories:
2x inner hexagon spanner 2pcs(S=2\3)
1x double-headed wrench (S=14\17)
1x cross screwdriver；1xcenter finder
1x turning tool (3.5*3.5mm), on machine
5x Height increase film(0.3mm)；5x Height increase film(0.4mm)
2x three-jaw chuck locking rod
2x two hole clamping plate
2xscrew(M4*16)
1 x apron；1 x goggles
Q&A
1.Q: Can I change the speed of the machine?
A: The speed is fixed. Can not change the speed of the machine. Note: The machine defaults to use the high-speed motor.
2.Q: What can I process?
A: You can process wood, plastic and soft metals (pure copper and pure aluminum).Note: The harder the material, the smaller the depth of cut.
3.Q: What is the size of turning tool?
A: The size of the turning tool is φ3.5*3.5mm, material is high speed steel. At the same time, we offer several Height increase films for you to adjust the height of the turning tool.
4.Q: Is the machine manual or automatic; What is the max swing over bed?
A: It’s a manual machine; the Max swing over bed is 50mm.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
3.9 out of 5 stars 645
3.9 out of 5 stars 828
4.3 out of 5 stars 533
4.7 out of 5 stars 19
Price
$15.99$15.99 $15.99$15.99 $12.99$12.99 $29.99$29.99
Application
Home Kids Home Home
【Speed】This is a MINI metal lathe driven by a 12V DC transformer, The speed is fixed. Can not change the speed of the machine. Note: The machine defaults to use the high-speed motor. which can be used for turning, drilling, boring, threading and other processing.Lathe SIZE:length 10.94 x width3.94 x high5.91inch
【Processing】It can be used to form and cut a wide variety of materials including wood, plastic and soft metals (pure copper and pure aluminum), but not alloys. When processing harder materials, the feed rate should be smaller, which is slower than processing wood. we offer several shims for you to adjust the height of the turning tool.
【Application】 Ideal for use in juvenile activity centers, school technical rooms, science and technology activity rooms, DIY hobbyist workshops, and student science and technology creation in science museums.making it perfect for small projects or hobbyists.
【Durable】Made of advanced aluminum alloy, durable and non-deformable for usage. The Milling is suitable for mini drill and drill bracket series. It can withstand regular use without showing signs of wear and tear.
【Precision】This machine is a micro lathe and cannot achieve very high precision. Please check the size of the accessories. If you have requirements for high precision, please consider purchasing carefully.
9 reviews for Mini Metal Lathe Machine CNC DIY Tool Benchtop Wood Lathe Woodworking for Hobby Sience Education Modelmaking, AC110V 50/60HZ
Add a review
$199.99
Christopher Spears –
Lathe wobbles and no center
Impossible to get centered with stock under 3/8″. Lathe wobbles when turning resulting in inaccurate cuts even after shimming. The guide bolt seems to be slightly off which is a shame because a second guide nut would solve this problem but the manufacture went cheap on the most important part! Looks nice but a lathe that will not center is completely useless.
Leopoldo Jose Ivan Pecorelli Marroquin –
Works as expected
Great for tiny masterpieces. Not for big works, but just for what is needed for me.
Customer in NH –
REVISED Not a Miniature CNC Lathe, but useful all the same
I’m not sure where the previous reviewer said it can only turn a piece that is only 3 inches, the unit that I received is capable of turning a piece that is 4-3/4″ long. Perhaps he didn’t think to adjust the location of the head and tailstock along the bed. Although the description says that you can do threading on this machine, you absolutely cannot, without some dramatic modifications; there is no lead screw, as just a beginning.A CNC lathe? Not out-of-the-box it isn’t.This metal lathe suites my purposes just fine for finer turning work than I can do on my Atlas engine lathe. For hobby work, it is suitable for model railroading. The instructions are absolutely useless. I plan on modifying it for adding some more usefulness; one of the virtues of a lathe. I have not experienced the motor overloading, when turning aluminum, that others have complained about. The cross-slide assembly has more slop than I want, shimming is in the works as well as machining a better method of joining the assembly to the bed.In terms of price, it is much less expensive than my Atlas was, but I can use it on my desk to turn a few spur-of-the-moment parts that my Atlas is too large to turn efficiently.If you need to turn a few small parts, as one-offs or to use for making a mold, then this is just fine. With a little thinking and a couple of 2″ extrusions, you can use this for turning wood or plastic parts, just less than 6″ in diameter. All you have to do is look, unscrew a few pieces and think about it. It’s not that difficult people.While it is not what it is claimed to be in the advertising, it is still useful.REVISION: While this lathe was okay with softwood and plastic rod, for a model railroading task, it is a major fail at metal. I picked up some brass rod at my local hobby shop. This lathe was terrible at trying to simply perform a cut-off with. Cut angle checked, cutting blade shimmed appropriately, purchased an adjustable power supply to slow it down, but there is simply too much flex in this unit to do any metal working.
JeanPaul –
Solid construction but non-functional with provided power supply
As in other reviews, the lathe is non-functional with the provided power supply. The 12 volt 2 amp transformer does not run the lathe for more than 2-3 seconds at a time. It then cuts off and starts again after several seconds. This is not acceptable for a power tool. Plan on spending another $10 for a power supply that will run the unit. I’m going with a 5-amp unit that others say works fine. Instructions are a nightmare. Lists parts with no figure to reference. Language translation very bad. Only single cutting tool provided, a disappointment. Otherwise, construction looks good and sturdy. Keep in mind, the entire machine is only about 10-inches long, not something that needs a lot of workbench top space like the images might lead some to believe.
Some Guy –
It’s tiny. Like you’d be lucky to turn down a deep well socket using this thing.
It’s far too small of an area to work with. I was expecting small but it’s minuscule.
Ubiratan K. –
It always fail when start
The motor always failed when the lathe was turned on. It also has a lot of slack on the table, difficult to do something that requires precision.Don’t recommend!
Amazon Customer –
It will need the chuck to be trued up.
Compact, can purchase some mini accessories. Nice value, but needs some things tried up to run without the part eobble
JK –
THINGS DO NOT LINE UP
The chuck does not hold the work straight and the cutting tools held by the cutting tool holder won’t line up with the center of the chuck like they need to. Vendor tried unsuccessfully to help. Ended up giving a partial refund. You get what you pay for.
Airton –
muito bom para madeira