3D Printer Enclosure with Ventilation Kit, LED Light,Thermo-Hygrometer, Premium Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/3 Pro/3V2/3S1/Neo
$44.99
Related Products
Product description
Can the ventilation kit only be installed on the right side?
Yes, there is a cutout for the ventilation kit on the right side only.
I’m not sure if my printer is compatible. What should I do?
We recommend measuring the length, width, and height of your printer, taking into account the maximum forward and backward movement of the heated bed.
Why isn’t the fan spinning after installation?
Check the net cover. It has a convex side, and the convex side should face away from the fan.If it still doesn’t work after trying, you can apply for a replacement.
【Enhanced Illumination For Your Printing Area】Improve your workspace visibility with our innovative built-in LED light strip. It will illuminate your printing process, allowing you to monitor it more effectively. By quickly identifying potential issues such as filament jams, layer adhesion problems, or misalignments, you can address them promptly even in low-light conditions.
【Temperature and Humidity Monitoring,Isolate Noise】Our enclosure is equipped with an advanced monitoring system that provides real-time temperature and humidity readings. This helps you optimize printing conditions and achieve higher quality prints. An enclosed 3D printer cover with all six sides effectively blocks the transmission of printing noise, effectively reduce noise and enjoy the silent printing process，
【Improve Print Quality with Constant Temperature】Provides a stable and controlled environment for your prints, maintaining a consistent temperature during printing ensures that you produce high-quality prints while avoiding print failures and material wastage. Constant temperature reduces the risk of material clogs and jams, enhancing your printing speed and efficiency.
【Dustproof and Fireproof, Safe to Use】Protect your 3D printer and reduce the risk of accidents with fire-resistant materials and a sturdy structure. Avoid dust particles from entering and negatively impacting print quality, ensuring stable and perfect results every time. Effectively prevent accidental touches from children or pets.
【Fast Installation and Long-term Use】5 minutes easy installation, quick start and easily disassembled for moving or replacing. Its robust construction ensures stability during operation, minimizing vibrations that could compromise print precision, and can support your long-term use and is not a disposable product.
【Wide Compatibility】Support printer size (include spool holder height) is smaller than 29.5×25.6×21.6″. Please measure your printer height before ordering. Compatible with Creality Ender 3 V3 SE/KE/ Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender5/5Pro/5S1,Neptune 4/Neptune 3pro 4pro,AnkerMake M5/M5C, Anycubic 2 Neo/Kobra 2 Pro/Kobra 3 3D Printer.
11 reviews for 3D Printer Enclosure with Ventilation Kit, LED Light,Thermo-Hygrometer, Premium Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/3 Pro/3V2/3S1/Neo
Add a review
$44.99
Mark M. –
A GREAT value for a surprisingly effective enclosure!
I needed to reliably print a few parts for a Voron 2.4 build, which requires ABS. I have an old Prusa I3 clone in the garage which I’ve occasionally used for this since there are usually no drafts, and I stink up the garage instead of the house. During the hot summer months, when the garage is often pushing 90F, I’m normally able to get away with printing ABS well with an open frame. Come fall and winter, warping becomes an issue. Plus, the family was getting tired of the “Don’t open the garage door!” exclamations from me when I was printing ABS.Picked this up to provide a quick enclosure, with hopes it would allow reliable ABS printing (and allow the garage door to be opened while doing so). This has worked SHOCKINGLY well. Since my printer has been in this enclosure, I’ve been able to print about 10 parts, a few of which are highly prone to warping (small contact space on the bed). All of them have printed successfully and beautifully. Of course, the blast of “ABS stink” when you unzip it to remove the print is fun.”Just the facts, ma’am”:Pros:- Super easy to assemble, although it’s bigger than you think so have some space.- Canvas with the shiny fireproof lining is thick and well sewed. It didn’t feel “cheap” at all. There is quality here.- I find the LED to be plenty of illumination, especially since it reflects off the shiny material inside. My print camera finds it to be plenty of light, too.- A good number of round bungs to route cables through, that seem to be in the right place. Two on the back and one on the right-hand side towards the rear.- Has a rather large flap on the left, which I’m not using. Closes with velcro.- I like that measurements were listed clearly, so I could ensure it would fit and get the correct size. Medium worked for my Prusa I3 clone (about the size of an Ender 3, I guess) with room to spare.- I can print ABS consistently, and get strong, clean prints!Cons:- Bungs are a little on the tight side. Had to really push the power cable through and thought I was going to tear the fabric. I did not, which is also a pro I guess, that canvas is pretty tough!- The clear viewing window has a lot of folds in it, so it can be a little difficult to see print details.Overall, I think this is a fantastic value if you’re looking for an inexpensive and plug-and-play enclosure for your 3D printer.
Patrick Perdu –
Spacious enough for my printer, good lighting, good ventilation.
Easy to assemble and disassemble.The lighting and ventilation work fine.I procured an airduct extension and printed my own duct adapter hardware, and it all works great.I use it for an FDM printer, which is overkill, but I would trust it for a resin printer.I would absolutely never use a resin printer without such an enclosure. Probably never within the living part of my home.This enclosure, though, I trust.
AGR Productions –
Good enclosure, wish it was bigher for other printers
This was my first printer i’ve ever bought, and we wanted to have an enclosure due to dust and animals. The enclosure is massive, but not massive enough to put a elegoo Neptune max in. It fits perfectly for my elegoo Neptune plus in though. So maybe if you have a printer underneath any max brand it will work perfectly. It does hide the noise and it does keep cold air out. At first it was a pain to build, but after a while you get it. I got it when I was on sale so I got 2 of them. I would definitely recommend this, especially if you’re just starting out printing. The quality is pretty good.It just reminds me of a tent. And it has side pockets and slots, if you have AMS or combo.
Tom Ruefer –
Good enclosure but previously opened
The enclosure had been opened prior to me receiving it. The package it came in was a makeshift box from a previous box. I’m guessing it was a returned item. I almost returned it because of that. The enclosure itself does a nice job holding in the heat and the large zipper flap made it easy to put the printer (Prusa MK3S+) into the enclosure. The light is a nice feature as well. It’s a good enclosure for the price.
Mason –
Fits a Bambu P1S, almost
This review is for the Medium size kit with the exhaust fan and tube. The outer dimensions are great for a Bambu P1S. The AMS fits with a few inches to spare on the top, and there’s plenty of room around the sides. It’s easy to open the AMS also, since the zipper top opens all the way up the front and over the top. The quality seems really good actually – sturdy and well built, and all of the required parts were in the box. Only one small hiccup is that the front zipper door is curved on the bottom, and the front door hits the curve. See the photos. I had to build a little 2” tall platform to put it on. With that, everything fits great! Still room at the top to fit the AMS. The fan, light, and tubing work great too. I’d recommend.
William –
A Must Have for X1Cs and VOCs
This 3D enclosure was recommended for a Bambu X1C printer and I can confidently say that it fits great! After some intuitive and light assembly and setup of the ventilation, I was ready for printing with smelly and hazardous filaments without the risk of pollution in my personal space. Not only does it contain any fumes, but it has helped with insulation for high temp filaments in order to help curb the need for a chamber heater to prevent warping. Now my ASA and ABS prints come out great. Finally I don’t end up with the dreaded layer separation problems anymore, and I can breathe with peace of mind.
K. Friedrich –
Passt sehr gut für die genannten Modelle bzw. die angegeben Größe.Schützt vor Gerüchen (diese sind bei einigen Filamenten recht unangenehm), hält die Temperatur im Inneren etwas höher als ohne (spart damit also Energie), schützt das Filament bei höherer Luftfeuchtigkeit und reduziert den Geräuschlevel.Gute Verarbeitung und leichter aufbau – im Gegensatz zu einigen Rezensenten hatte ich überhaupt keine Probleme mit dem Stecksystem. Ist stabil und auch nach internsiverer Nutzung weder beschädigt noch irgendwie beeinträchtigt.Insbesondere die LED-Leiste ist hilfreich, da sie den Innenraum gut ausleuchtet – nur ein separates USB-Steckernetzteil wird hierfür benötigt. Eine Luftabsaugung kann ebenfalls angebarcht werden.Für mich ein sehr empfehelenswertes Zubehörteil, insbesondere bei dem Preis!
Julio Bracke –
Did exactly what I bought it for… No more bad first later because of cold environment
Vanskateren –
Frame extremely weak, assembled it on a soft couch and with pushing the frames (according to manual) together it simply broke. Save your money on a stronger construction
TokyoJ –
I put my BambuLab P1S in this and it works great and gives me peace of mind. No more PLA smells while printing as it all vents outside.I did need to cut down the supports a bit which were a bit too long, but wasn’t too big of a job.
Jordy –
everything you need in a print enclosure, plenty of space, fan is powerful