FoxAlien Masuter Pro 3-Axis CNC Router Machine, Beginner Hobby Engraving Machine All-Metal Structure for Wood Acrylic MDF Nylon Routing Milling Carving
$599.00
Related Products
Product description
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Masuter Pro introduction Merchant Video
FoxAlien Masuter Pro is a budget-friendly, beginner and hobby CNC machine for education, home use and small workshop.
1 Z-axis Linear Rails
2 32-bit Control Board
3 Support GRBL Software
4 Stable & Easy Maintenance
Product Specifications
Active Working Area 15.75” x 15.75” x 2.36” (400 x 400 x 60mm) Input Voltage & Current 12V/5A Spindle Power 60 watt Spindle Speed 10000 r/min Stepper Motor NEMA 17 Firmware Version 1.1H Driven System Belt-driven (X, Y-axis); Linear rail-driven (Z-axis) Support OS Windows XP/7/8/10/11, Linux, Mac OS Software Grblcontrol(Candle), UGS, and other GRBL compatible software
1 Spindle Upgrade
2 Stepper Motor Upgrade
3 4th-axis Upgrade
4 10+ Add-ons for Upgrade
When I open the software, it says “port open”, and cannot connect to my machine.
1. Check the E-stop, make sure it is pulled up. Then click unlock.
2. Check limit switches. If any axis presses the limit, the machine will lock, too. Power off the machine, manually jog each axis away from the limits. Then re-start the machine.
What’s the router bits in the package?
There is a set (10pcs) of V-bits included. They are 30 degrees, 0.2mm tip V-bits.
The flash drive in the box failed. Where can I find the documents?
Check the user manual for the download link. If you cannot find it, please send us a message.
Can I change and upgrade the stepper motors of the Masuter Pro?
Yes, the Masuter Pro supports NEMA23 stepper motor upgrade now. You will also need to replace some new plates, too. Complete stepper motor upgrade kits for Masuter Pro: B0F6C9W2PZ
What should I do when the belt is loose?
Check belt tension on regular basis. Adjust the belt clips to tighten the belts. If the belt is too loose and cannot be tighten, it may be worn out. Please replace with new belts.
FoxAlien CNC Router Machines Family
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.0 out of 5 stars 550
4.4 out of 5 stars 93
4.3 out of 5 stars 76
3.8 out of 5 stars 8
3.9 out of 5 stars 45
Price
$599.00$599.00
$999.00$999.00
$1,299.00$1,299.00
$1,799.00$1,799.00
$679.00$679.00
Type
Beignner level
Advanced level
Advanced level
Professional level
Beignner level
Active Workspace
15.75” x 15.75” x 2.36”
15.75“ x 15.75” x 3.74“
15.75“ x 15.75” x 3.74“
33“ x 33” x 4.73“
15.75“ x 15.75” x 3.74“
Stepper Motor
Open-loop NEMA 17
Closed-loop NEMA23
Closed-loop NEMA23
Closed-loop NEMA23
Open-loop NEMA 17
Stepper Torque
0.45 N.m
2.2 N.m
2.2 N.m
2.6 N.m
0.45 N.m
Control Board
32-bit
8-bit
8-bit
32-bit
32-bit
Motion System
Pulley (XY); linear (Z)
Pulley (XY); linear (Z)
Ball screw (XYZ)
Linear rail+ball screw (XYZ)
Pulley (XY); linear (Z)
Built-in Offline Control
✘
✘
✔
✘
✘
Support Extension
✔
✔
✔
✘
✔
Support Linear Rail Upgrade
✘
✘
✔
✘
✘
All-Aluminum Structure & Enhanced Stability: Engineered with an all-metal framework and linear rail Z-axis, the FoxAlien Masuter Pro offers superior precision, durability, and stability for detailed engraving and cutting on wood, acrylic, MDF, nylon, and more.
Upgraded Dust-Proof Controller & User-Friendly Design: Features a compact, dust-resistant controller box with easily accessible emergency stop and home buttons for safer, more convenient operation.
Versatile Spindle Compatibility & Customization: Includes two spindle clamps (52mm & 65mm) compatible with 60W and 300W spindles, as well as custom upgrade options like 65mm router or 1.5KW spindle for advanced carving needs. It also supports the 69mm spindle clamp, please buy separately.
Quick Assembly & Pre-Wired Components: Main parts are pre-assembled with pre-wired wiring to the controller, plus a detailed step-by-step manual—set up in just 10-15 minutes, ideal for hobbyists and DIY enthusiasts.
Large Working Area & Expandability: Features a generous 15.75” x 15.75” x 2.36” (400 x 400 x 60mm) engraving surface, with optional Y-axis extension kit, perfect for larger projects and versatile woodworking applications.
9 reviews for FoxAlien Masuter Pro 3-Axis CNC Router Machine, Beginner Hobby Engraving Machine All-Metal Structure for Wood Acrylic MDF Nylon Routing Milling Carving
Add a review
$599.00
T.McCartney –
Just buy it! It’s sturdier than you think and is much faster than the blue brand.
This is the best money I’ve ever spent.Motor:The Masuter Pro obviously comes stock with a “weak” 775 style cutting motor but it can still do decent work at a slow pace and is helpful for a beginner to learn the machine and it’s capabilities. It includes about 8 identical 1/8” v-shape steel cutters which are okay quality for mdf and softer woods. The ER collet is good quality and provides good stability considering the stock motor is the type that uses oilite bushings which are usually sloppy. The motor shaft has a tiny bit of radial movement, though less than I imagined it would.I intended from the get-go to use a 65mm trim router and I was pleased to find that it includes a very heavy duty aluminum mount for 65mm routers.Dust Control:There is no included dust shoe for a vacuum or dust collector, so I 3Dprinted a vacuum hookup that attaches to the 65mm router. The file was free on Printables. You can buy a universal FoxAlien dust shoe attachment for an additional $50Cutting Area:The stock work area is generously sized at a tad under 16” x 16”.A quick & easy modification for gaining 2” in working/cutting width (X-Axis) is to print (or make from 1/8” aluminum) new X axis limit switch mounts and then flip the X belt end attachment brackets upside down to gain 50mm+ of X movement! This gave me about 18” of max cutting width for zero dollars. There is a free stl file and modification instructions for the switch bracket extenders on printables. You then remove the pieces of metal that the x axis limit switches hit on the sides and now use the aluminum gantry riser itself as the hitting point for the limit switches. Why this unit isn’t like that from the factory confounds me. Most people use the spare belt that comes with the machine to make a longer belt when doing the X mod to give you the added X travel, but I was able to use the surplus belt slack and keep the stock belt in place.Electronics:The stock control box is well designed and has worked well for me. All the wires have flag tags on them for easy mating. You have to mount the wire control track but the wires are already ran through the track which makes assembly and wiring a breeze.Software: I haven’t used the included thumb drive software that comes with the Masuter Pro. I’ve been using free browser-based Easel software running on a used 2013 MacBook Pro to run the CNC. I bought the Mac specifically for running this machine and my 3D printer and it works great. The Easel software detected the Masuter Pro and downloaded the appropriate drivers for me.Quality:The build quality is great, I was going to get the other similar sized blue brand machine because it looks much heavier duty but it is much slower and would not work fast enough for my sign projects. The Masuter Pro is designed lighter and with less material but has good engineering and upgraded pieces where it counts, like the Z axis having square linear rails. There is an almost imperceptible amount of movement when you try to move the cutting shaft around by hand to assess the sturdiness of the motor gantry. It’s actually hard to believe how tight this thing is considering it uses belts and plastic wheels, the extrusions are very strong.I intend to upgrade the roller wheels to a Japanese name brand to see if I can get the tiniest last bit of movement to go away for metal use.I do believe this machine can do aluminum cutting with the proper upgrades, but if that is your main use, I would recommend a much heavier unit with full linear rails.Upgrades:I will soon be buying the extension kit and seeing if I can mod extra travel out of it, with the x mod I will have 18”x30” of cutting area and I think I can likely mod the Y-Axis for an inch or two of extra travel as well, giving me a gigantic cutting size for the price.I may also upgrade to bigger stepper motors in the future, but really currently have no need!
Dizzy! –
ROCK SOLID Construction, Huge Step Up From The Other Version!!!
*Best Features at the bottom*I was genuinely so blown away when I was unpacking the parts!I got the regular version like a year ago and I’ve been using it (I mostly use the laser rather than the CNC) and it’s been awesome, I’ve designed some “boxes” to hold bottles of scented sprays I make with my partner as well as shelving to display the products at craft fairs and conventions and in stores. I would give the OLD version like a 9/10 because it was easy to put together and easy to start using and I get good results from it, but the actual router module tended to drag a little when using the CNC because the way it’s attached, it’s a little weak. That didn’t affect me, I use the laser mostly, so whatever.BUUUT the new version is a brick house, it’s like the Super version. All the aluminum rails are noticeably weightier and feel really rigid and tough, the whole thing is like a tiny bit textured and it’s very obviously built thicker in some areas than the original. It’s really nice, I was super impressed unpacking it.Assembly took about fifteen minutes, give or take. I knew essentially what I was doing already though since I’ve assembled the original, but I don’t imagine it’d take long for a newbie either. I already had drivers on the computer and the programs I’d need (LaserGRBL mostly, but also Candle), but again it takes literally minutes to download your programs and they include a flash drive with the drivers on it, it’s pretty simple.And that’s it, it’s super fast to put together and get started, especially if you’ve ever used a CNC or laser before. Side note, I also have the roller attachment and it TECHNICALLY works with this machine, but it was very difficult to get it hooked up because the control box of this machine encloses the control board where the rollers need to be plugged in. I do prefer having the box over the old one that has no protection for the control board, but I didn’t love having to dismantle the box to plug in an accessory that I need to use for engraving cups (which I do a lot for gifts and such).Anyway, I have a couple notes about stuff that’s a MAJOR step up.One, like I said, the construction is rock solid, it’s such an improvement. I think it’s the best-built machine I have at the moment, it’s really good. But also, there’s more stop-triggers and they’re better placed AND they have a much stronger click to them. When the auto-stop gets triggered on this you KNOW it.Also, the actual “tool” module (not sure what else to call it, it’s the part that holds the router or laser) is WAY more solid. It uses nylon-greased tongue-in-groove rails instead of the old model’s circular rails and screws, and it’s like 400% more solid because of it. The up-down motion is WAY more precise and stable, it’s really really good.But maybe most of all, and this is huuuge for me – the knobs to allow manual calibration of the axis on ALL THREE AXES. It’s sooooo important, I really can’t overstate it. The XY axes are fifty-fifty for me, I don’t have much trouble calibrating those via software, but LaserGRBL DOES NOT HAVE A Z AXIS CONTROL. So, if you’re engraving a 1/8″ thick piece of wood and you’ve adjusted your Z axis for a 1/16″ thick piece, you have to close the program, open Candle, calibrate the Z axis there, close Candle and reopen LaserGRBL, and then proceed with your work. There’s no way to easily move the Z Axis when you switch materials, it’s a huge pain in the butt – EXCEPT, now that this machine has manual knobs, you can manually just calibrate it yourself by hand and it takes literally seconds. HUGE time saver, I can’t even begin, it’s a gigantic improvement, I love that feature!!All in all, I’m definitely super impressed with it, I’ll be engraving metal tumblers for the next couple weeks to prepare some presents for my TTRPG group (don’t tell them, it’s a surprise lol) and after that I’m gonna make some new shelving!!!
Amazon Customer –
Don’t buy
Assembly was easy straight forward with instructions that were easy to follow and understand, Worked great for the first few weeks, then suddenly the spindle would not turn on, contacted support, explained the problem and they said I should take a meter reading of the voltage (think it was the voltage, I’m not an electrition) so $25 later I tested the voltage, took a photo of every setting.They got back to me and said I needed a new mother board and they had ordered one to be delivered from China ( think it took about ten days.So when I attempted to replace it the problem became obvious, the spindle connection to the mother board had blown, resulting in the connection melting itself to the mother board making it impossible to remove the now redundant mother board, when I informed Foxalien about this, they said I need a replacement spindle cable, I told them I’d had enough and wanted either a replacement machine or my money back (I repeated this several times during our correspondence, each time they completely ignored my request as if I’d never said it) and there reply was, we’ve ordered you a new spindle cable, from China. Honestly I was quite happy with the machine at the onset, but the hoops you have to jump through and the terrible customer service not to mention the weeks you have to wait for any part that fails is unacceptable.
Mark Plante –
Great Machine for the price
This is the first CNC machine that I have ever owned or even used. I was happy with the size as it fit on my workbench. Putting the machine together was not that difficult (with the help of YouTube) and the quality of the parts were much better than I thought they would be. For the price, I am glad that I purchased this machine, it is well worth the amount I paid for it and it functions quite well. The cuts have been quite accurate and I am very happy with this purchase.
Panos –
I’m very happy with my purchase. The packaging is perfect keeping the machine parts protected and in order. You can tell its a quality product just from the packaging. Easy to assembly with very simplified posture manual. If you have assembled an IKEA product before this is alot easier and simpler. The machine itself feels high quality and very sturdy. Trye out and works perfectly, i love that it is upgradable and gives the feeling of a professional mashine. I was happily surprised to see that the packa included some spare parts as well.Highly recommended 👌
Cliente de Amazon –
Una maravilla, funciona perfectamente y es muy fácil de usar
Ronny Barfuß –
Ist schon ein tolles Spielzeug. Kann eine Menge schöner Sachen mit herstellen
Marisa Sestan –
nulla da dire, è la migliore. per avere il massimo dei risultati per lavori con frese grandi consiglio di cambiare immediatamente il trapanino che però è ottimo per piccoli lavori. Con un bel matita da 65mm si può fare qualunque cosa. ora farò delle modifiche per renderla più grande. per i miei lavori di insegne neon necessito di un piano più grande.
JLG –
Super machine. Après avoir pris la fraiseuse CNC matuser Pro. J’ai pris l’extension 40×80 et les moteurs nema23. J’ai voulu reconstruire l’extension et j’ai pris chez FoxAlien la barre central et j’ai commandé des micro Switch. Ce qui me fait deux fraiseuses.