RATTMMOTOR DIY CNC Router Kit, 3 Axis Hobby CNC Router Machine GRBL Control, Plastic Acrylic PVC PCB Wood Mini Desktop Engraving Milling Carving Machine, Working Area 300x180x45mm
$21.99
Related Products
Product description
About Machine Installation:
Although this mini engraving machine is shipped in bulk, it is simple and easy to install. The package is equipped with an English installation and operation manual. In addition, we also have an assembly video, so users do not have to worry about not installing the machine.It should be noted that this is only a mini machine suitable for novices or DIY enthusiasts, and cannot be compared with professional industrial machines.
PARAMETERS
Work area: 300x180x45 mm ((11.8 x 7.1 x 1.8”)Frame: 420x350x270mm (16.53×13.78×10.63”)Material: PA6 Nylon + Aluminum profilePower supply : 24V 5.6A power adapter (input voltage 110-240V)Supporting file:G-code (.nc/.txt/.tape/.gcode)Collet: ER11 3.175mm (Can be equipped with 0-7mm)Step motor: Nema17stepper motor 1.3A, 0.25N.mProcessing accuracy: About 0.2mm
CNC ROUTER MACHINE WHAT’S IN THE PACKAGE
1 x DIY MINI CNC Router Machine Kit1 x Power Supply10 x Tip 0.1 mm, 20° 3.175 mm Drill Bits4 x Plate Clamps1 x English Manual1 x 4GB USB Flash Drive2 x Brush1 set Allen Wrench
775 Spindle Motor 100W 10000rpm Front and rear double ball bearings, universal DC 12V-24V voltage.Shaft diameter: 15mm; Motor diameter (without magnetic sleeve): 42mmlarge torque，low friction and stable operation.Double ball bearings have low noise.Mounting hole diameter: M4 screw hole; Mounting hole pitch: about 29mm
GRBL Software
Format flies that support Grblcontrol engraving: Support G-code files of nc, ncc, tap, txt
Supported Engraving Materials: Wood, plastic, acrylic, pvc, pcb, carbon fiber, density board, plastic phone cases, rubber stamps, copper , aluminum and other soft materials.It should be noted that materials such as jewelry, jade, stainless steel, stone, ceramics and other similar materials are not supported.
GRBL 1.1 Control Board
New Fuction Add the X/Y/Z axis limit switch function, which means that the engraving machinecan automatically stop moving when the X/Y/Z axis moves beyond the engraving machine stroke. This feature may extend the life of the engraving machine well.Increase the function of emergency stop button. When the engraving machine is working, if it needs to stop working immediately due to an unexpected situation, you can press this button. The emergency stop switch button can well meet the user’s work needs, and can also provide a safer working environmentt.
QA Q-1: What should I do if the driver and software cannot be installed successfully?A-1: First install Win7/ win10 under the support system, the re-install or exit th anti-viirus software and re-install. ( We cannot guarantte 100% support for win10. If the user cannot install the driver on the win10 system, please contacte uss to solve it. )Q-2: How to view the default parameters of the three axis control board?A-2: Enter S RST=* ( restore the default value ) first, and then enter SS, you can view the parameters in the control window.
Advantages Support : Supprt emergency stop, X/Y/X axis limit switch, offline controller, probe,ect.Enhanced spindle drive, can support up to 20,000 rpm spindle motor.Add the outer casing, not only protect control board in transit, to avoid short circuit problem during use.Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy.Add the low noise fan port to force heat dissipation.Add offline recognition,can insert offline modules and computers at the same time. Offline will automatically identify if there is computer control.Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong.The spindle drive increases the optocoupler isolation, which makes the control board generate less heat, and the spindle speed adjustment is more linear and safer.
【Upgrade Version CNC Machine】※ Frame size: 42x35x27CM (16.53 x 13.78 x 10.63”). Working area:18x10x4.5CM(11.8 x 7.1 x 1.8”). Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
【Material/Dimensions】※ The fixed external frame is made of black injection molding material, working table is aluminum alloy material. Screw rods uses stainless steel quality. It can able to engraving in plane by moving X/Y/Zaxis. High precision and durability and good appearance.
【Simple Assembly/Use】※ This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files.
【Update GRBL Board】※ The updated control board has added the functions of supporting emergency stop button and X/Y/Z axis limit, and the functions are more complete. Users can design and equip those DIY accessories suitable for this mini engraving machine according to their own needs. Equipped with a silent cooling fan, which can dissipate heat quickly during operation, with low noise and good quality. Also, the control board can automatically identify the offline controller, support PWM.
【Applicable Engraving Material】※ This mini CNC machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect.
13 reviews for RATTMMOTOR DIY CNC Router Kit, 3 Axis Hobby CNC Router Machine GRBL Control, Plastic Acrylic PVC PCB Wood Mini Desktop Engraving Milling Carving Machine, Working Area 300x180x45mm
Add a review
$21.99
Serguei K. –
This is quite awesome for the price
Knowing the CAD software pretty well, this machine is quite useful to me. I am fluent in LibreCad and AutoCad. I use this with Linux laptop so I had to search internet for the Linux version of the Candle, which I had to compile from source. It did turned out to work great. I use dxf3gcode converter program so I can turn my Cad files into gcode to load in the Candle. On overall what I have works great for me.As for the machine itself, I did upgrade the spindle motor to 20,000rpm which is available for about $23 and takes minutes to swap. The machine is very loud especially with larger diameter bits and the 20,000rpm spindle, so I had to construct a box to contain the noise. I am happy with the accuracy of the machine. Note that I do not see that it supports the tool diameter offset… This is an inconvenience, but I got used to build the offsets in my Cad files now over a month later since buying this machine. The precision if fine for me and I do nested inlays in wood and plastic. I do get pretty consistent results from my machine and can make some micro adjustments to the CAD file to make the inlays fitting tighter, but just as is, they end up quite acceptable. The machine gets squeaky from the dust. I tried using PTFE spray lube (dry lube), but it was lasting for less than a job before the squeaking returns. I use regular WD40 now. It lasts for several jobs and is not much worse than PTFE dry lube as far as the dust tackiness goes (I just put a small squirts of WD40 right where the contact points and run it back and forth a couple of times).Very useful machine to me, obvious thing for anyone who gets a CNC is to understand that computer aided drafting is a must unless you want just to cut some downloaded designs. Mastering some CAD software is the biggest hurdle if you do not know how to use one already. Luckily for me I had nearly 2 decades of Cad experience prior to this.
Daaku Rei –
Excellent price for a beginner rig
The overall sturdy design for this product helped me get my projects done. The motor was louder than I initially expected, but it was tolerable, and I could muffle it by placing the rig in another room with the door closed. Creating project pieces was pretty easy, though I don’t think there was an option to control spindle RPM. Only issues I had was the motor burned out after 2 months due to dust build-up, and the rails would also collect dust, causing the axis to jitter and malfunction when moving coordinates (screwed up a few times while making product parts), Overall, it’s a good rig with a few flaws. I probably need some kind of negative air enclosure or something, but running a vacuum 24/7 doesn’t sound feasible.
AL –
Easy to use.
I am impressed with this CNC. Once getting over the learning curve of CNC software I’m getting comfortable with using it. Today I was cutting 3/4″ Red Oak with it. It’s much more capable than expected. I’m so impressed I’m buying an expansion kit to make it a 3030 CNC.
Area man –
Impressive size, quality and completeness for the price
I received the kit around noon and was using it by the evening. Although it requires considerable assembly, the fit and finish of the parts are excellent. Other cnc engravers require you to fiddle and futz with the alignment; not this one. I am impressed at what one gets for the money.Everything is included to get you engraving including the cutters, workpiece clamps and wrenches. I used the cncjs grbl controller software with it which works perfectly.I would definitely buy again!
FRANK507 –
Está bien pero
Hace su funcion pero me enviaron la base de aluminio mas torcida que encontraron había una diferencia de mas de 1 mm entre una esquina y la otra la cama estaba curvada las esquinas undidas pero lo demas todo bien
Mister Sir 31459 –
A lot of machine for a small amount of money
So far so good. Even though the structure is mostly plastic (Bakelite) it is surprisingly rigid.The manual is very basic but good enough to put it together. But don’t expect the manual and the included software to get you up and running if you don’t already have experience with these kinds of machines. Expect to do a lot of research and some experimentation to get up and running, that is part of the fun!It has a slightly limited feature set, but I strongly for software you go to cam.openbuilds.com. Its free and very great for beginners. You do your design work online and it seamlessly integrates with a small program you download (for free) from the website called “OpenBUilds CONTROL”. That website and that small program are everything that you need to get this machine working and producing objects.”OpenBuilds CONTROL” is basically doing what “candle” would do, but it has a nicer interface and imho works better. It provides the interface to the machine via the USB cable, it has easy controls for manually jogging and homing the machine. OpenBuildsCONTROL can open a g-code file and run the machine from that. Or if you design on cam.openbuilds.com the g-code is automatically created and sent to the CONTROL program.
Linda –
Good product
This is a good product for small projects. Be aware that you need software to design projects. There are free ones available.
Don lizmatch –
missing parts and definitely misleading
I would have liked to be aware that it doesn’t have limit switches which are sort of necessary for it to work correctly, no usb cord to plug it in to a computer and no end bits. Contacted customer support and they remedied it immediately definitely recommended
Iván Reyzar –
Excelente para empezar a trabajar con CNC
Gabriel mancera h. –
Megosto mucho el precio,la calidad de los materiales con que esta hecho y que no es muy complicado de armar.Y lo que no me gustó es que primero no te especifica cual es el eje Z, cual X y cual Y en la placa si pero a la hora de conectar tus motores no sabes cual deve ser cada uno y para empesar a usarlo sus intrucciones son muy pocas.Si no tienes conocimiento alguno tienes que estar buscando videos de como convertir imagenes y como empesar a usarlo.A y seria mejor si en lugar de 10 puntas iguales vinieran 5 modelos diferentes 2 de cada una. Ptque tambien deven saver que hay puntas para diferentes usos. Pero la maquina vale mucho la pena.
JUAN CRUZ OCHOA RUIZ –
ESTA MUY BIEN DISEÑADO Y TRABAJA PERFECTAMENTE
Francisco Javier Guerra Mendiola –
La herramienta que necesitaba
Marcos Pizano –
Buen producto