Upgrade 3-Layers Filter System Smoke Exhaust Kit with 5000RPM Fan and Speed Control Power Adapter for All Laser Engraver 3D Printer Enclosure Tent Cover DIY (Ventilation Kit)
$25.89
Related Products
Product description
Branded Strong 5000RPM Fan
Adjustable speed controller meeds various needs
Size: 70*70*20mm; Type: DC Brushless; Power: 12V 0.3A; RPM: 5000(MAX). Long lifetime, low noise, high speed, fast heat dissipation function.
Thickened flame-retardant blades
with high quality ABS material blades: Wear resistant, pressure resistant, impact resistant, sturdy and not deformed.
With Copper core mator, higher lifetime, continious and stable work.
Eliminating odors and improving air quality
Improve the air quality inside the enclosure, maintain a safe working environment.
Speed Control power adapter
Input: AC 100-240V 50/60Hz; Output: 3-12V, 2A.
The speed control feature allows you to adjust the airflow according to your needs.
Three layers Cotton filter to attached the cooling fan
Three layer filtration to absorb large particles of dust and harmful gases, thus protecting the environment. But please know it needs to print the plastic adaptor to replace the steel fan bracket, please download the file from Thingiverse : thingiverse.com/thing:6424894
12V Fan Filter System with Speed Control power adapter (Input: AC 100-240V 50/60Hz; Output: 3-12V, 2A): You can add this onto your enclosure to make the tent provide ventilation to prevent smoke and fumes buildup during printing. The speed control feature allows you to adjust the airflow according to your needs.
We put three layers filter to attached the cooling fan: Three layer filtration to absorb large particles of dust and harmful gases, thus protecting the environment. But please know it needs to print the plastic adaptor to replace the steel fan bracket, please download the file from Thingiverse : 6424894
Smoke Extraction: This makes your 3d printer enclosure effectively extract smokes and fumes generated during the printing process, Used with filter System to create a healthier and safer printing environment.
Compatile with most Enclosure tent. You may need to cut off a suitable size opening if your enclosure doesn’t have to install this filter system. If you need more filter COTTON set, please search this ASIN: B0FP2SQYNF
Cooling fans：Size: 70*70*20mm; Type: DC Brushless; Power: 12V 0.3A; RPM: 5000(MAX) ;Weight: 90g ; Color: Black.
12 reviews for Upgrade 3-Layers Filter System Smoke Exhaust Kit with 5000RPM Fan and Speed Control Power Adapter for All Laser Engraver 3D Printer Enclosure Tent Cover DIY (Ventilation Kit)
Add a review
$25.89
dar206 –
Easy to assemble and use. No leaks from it.
Works great and is easy to assemble. I used foam board to connect the exhaust hose and direct it out the window. window. I didn’t notice any fumes indoors while I used this.
Alexander –
This is for the big enclosure!
Ordered this enclosure because it was the cheapest option for a CNC machine without having to custom build everything by hand. The dimensions of the large enclosure is 30x30x35 inches, which fit perfectly for my Openbuilds C-Beam machine. I’ve been working on adding some custom parts to my machine so I needed it to be slightly bigger than what I currently have and this fits like a glove!The box this enclosure shows up in is surprisingly small, considering what is inside. Almost thought I was sent the wrong enclosure but no. It is just super efficient packaging.A word of advice because it took me a moment (too many IKEA builds), the lettering on the tubes are for Length, Width and Height. I initially expected it to be like IKEA stuff and certain pipes go in specific places but no, just stick the W pipes together and place it in the right orientation. Super easy instructions.There is a 3D Printed light bar clip in the box. I suggest adding the light bar and clips to the pole before installing it as one of my clips broke when I tried snapping it on. Thankfully it comes with straps that work too.Overall, this enclosure is going to allow me to use my machine without dust or chips flying all over the place. There are plenty of holes for wires or tubing for a shop vac or something similar. If you’re needing an enclosure for a CNC but dont have the budget to build one, this will work.Just dont expect it to muffle noise much.
Zekule –
Works as intended!! Looks Pretty Cool!
This cover has been really good at venting out the smell and bad air, its not perfect there will still be a tiny bit of residual smell but its 99% better than without the enclosure! So I highly recommend an enclosure of some kind. I got this one because I have the current biggest 3D Printer from Anycubic the M3 Max. so as you can see in the photo it fits just fine. I kinda wish they maybe a model that had the door on the wider side of the box so it would easier to get to the back of the printer. but so far Ive been really happy with it. I also really like that its big enough to store all your tools like allen wrenches and scrapers inside so the whole area looks much less cluttered.The only legitimate complaints Ive had with it so far are the instructions basically want you to 3D print adapters for fans which seems really counter intuitive if you are getting this for your first 3D printer. But honestly I would just skip the adapters and purchase a fan like this for the vent:https://www.amazon.com/dp/B01MXVWT9O?psc=1&ref=ppx_yo2ov_dt_b_product_detailsI really wish I could make that an affiliate link -_- but hey thats what I used and its super easy to setup.Some of the instructions aren’t super clear, I have no idea how I’m supposed to attach the red protective screen on the front, it comes in the box as a loose sheet of plastic. I thought it would have Velcro or something to attach it so I still have no idea what to do with it. It might just adhere to the clear window?? but I have no idea the instructions aren’t clear on how to attach the red plastic window. you kinda just have to figure it out yourself. its not pictured but I just ended up making my own cover with Velcro and sturdy fabric.
Drake –
Keeps my enclosure warm
The pad itself gets hot but it is not going to get your enclosure to the temperature that the pad itself says.My A1 Mini was struggling with warping in my 65F basement. This pad keeps my enclosure about 8F over ambient on its middle setting when not printing. With the head bed also on it gets about 20F warmer than ambient.
henry –
worst enclsoure filtration fan system on the market. avoid at all cost
I don’t normally leave reviews.However, this product was so horrible and such a horrible experience, I would advise everybody to avoid this item at all cost. this filter they “claim” to filter all particles is a thin cheap cover that doesnt really do anything and the product is flimsy and thin and poorly made.Even worse, every thing about this product is not incompatible. the fan itself is horrible quality and horrible to install. the hose is smaller than 3 inches so it is pretty much impossible to connect to any exterior and doesn’t fit t oaynthing since it is so small. the quality of the hose is pertty much just an aluminium foil thin quality and rips at the slightest pressure.would avoid at ALL costworst enclsoure filtration fan system on the market. avoid at all cost
LinckG –
Removes all odor.
I have FDM and resin printers. This enclosure works great for both. I got a 4″ inline fan designed for green houses and vent it out the window with a dryer vent in a sheet of plywood. I do the same for my laser with a 6″ vent. So, I just used the same board. I leave a little vent unzipped in the front to help with air flow. No issues with any of my printers. I’m in a rental, and had to have a non-permenant solution. This works great. It is very light and easy to break down for transport, or storage.I started having print issues after a while, and put a hygrometer inside. The humidity of the enclosure is higher than the ambient of the room by 8%. This appears to have effected the filament. So, I have stopped leaving filament in the enclosure after printing is complete. I believe humidity from outside is making its way into the enclosure after I turn off the fan at the end of printing. My vent does have a flap, but it is not air tight. It just keeps the insects out. Not an issue with the enclosure, but it does necessitate a change in workflow. At the end of printing, I pull the filament and place it in my dehydration box, which I probably should have been doing anyway.
pmcphoto –
Not really suitable for resin printers.
This works okay for exhausting 3d printer fumes, but the fan is under powered. Not really suitable for resin printers.
HutanNusantara –
I was expecting it to be white as displayed. But it turned out to be this grey. Thankfully it matches the theme of my room (and there are no other enclosure in any other colour aside to black available in my region) otherwise I would have asked for a refund.For those who are considering external extraction fans, the pipe/tube and flange provided in this set are of these sizes (attached pic).
NateDogg –
Excellent, works perfectly for my LaserPecker LP4 – I can now externally vent fumes and be confident with the added protection this enclosure gives. Well made, easy to put together and great price.
Dieter Lars –
Tut genau was es soll. Genau wie Beschrieben. Benutze es als Günstige Abluft alternative für Cannabis Anbau, da Funktioniert es Top und hält den Starken Geruch draußen.
Nicklas Åslev –
With this tent I can finally print abs/asa with absolutely ZERO fumes leaving the printer into the rest of my house.I clost the tent, not completely, but enough to let air come on through the front. I then turn on the fan at the back which gives the tent a slight negative pressure. This guarantees that no air escapes and air is circulated through the printer and out. No hotspots are created.I even measured the PSU temp with this on, while printing ASA and it was always performing at regular levels.When printing PLA I just leave it completely open. I’ve printed about 100hrs with PLA with this setup and I have experienced no issues yet.10/10 this setup is the absolute best when printing in areas where other people reside.
Chris rowe –
Does the job perfectly at a fraction of the cost compared to other enclosures