3018-PRO 3 Axis CNC Router Machine Kit, with GRBL Offline Control Engraving Machine, DIY Mini Wood Plastic Acrylic PVC Milling Router,Working Area 30x18x4.5cm

Product description

PACKAGE INCLUDE: 1Set 3 Axis 3018 -Pro CNC Router Engraving Milling Machine Kit + Accessories as shown

Work Specification

Working area 300x180x45mm ( 11.8″ x 7.1″ x 1.8″) Frame size 420x350x270mm ( 16.53″ x13.78″ x 10.63″) Spindle 775 100W spindle motor (24V:10000r/min) Processing thickness 4.5cm (1.8″) (height 6.4cm) Screw rod T8 screw rod, lead 4mm, double copper nut to eliminate backlash Spindle Chuck ER11 Collet (can be equipped with 0-7mm) Step motor Nema17 stepper motor 34MM,1.33A,0.3N.m,43oz-in Power supply 24V 5.6A power adapter (input voltage 110-240VAC) Support System Windows XP SP3,Win 7,Win 8,Win 10 (32/64 can be);Linux Connection PC-USB connection (USB-CH340) Supporting file G-code (.nc/.txt/.tape/.gcode) Processing accuracy about 0.2mm Drill bits 10pcs tip 0.1mm 20 degree φ3.175mm Chuck specification ER11 3.175mm (Can be equipped with 0-7mm) Processing thickness 4.5cm (1.8”) Master chip atmel 328P (arduino nano)

Advantage

1.Cancel the drive modulle, integrate the imported stepper motor drive, and comes with short circuit protecttion, no need to worry about modulle damage

2..Add offline recognition function, can insert offline controller and computer at the same time. The machine will automatically recognize it

3.Enhanced spindle drive. It can support 20,000 rpm spindle. Support higher power spindle

4.Increase the power button switch

5.Spindle supports 0-100% adjustable PWM power. Support PWM / TTL signal control

775 Spindle motor

Mounting hole diameter: M4 screw hole; Mounting hole pitch: about 29mm.Motor shaft diameter: 15mm;Motor diameter: 42mmDrill clamp parameters: ER11-3.175mm ( can be replaced 0-7mm )Supporting files: G-code GRBL1.1 controller board

Support XYZ three-axis control, spindle, laser head, 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch.

Offline Controller

Apply to Wood, plastic, acrylic, PVC, PCB, carbon fiber, density plate, plastic phone cases, rubber stamps, copper, aluminum and other soft materials. MUST be noted that materials such as jewelry, jade, stainless steel, stone, ceramics and other similar materials are not supported.

The X,Y and Z axis of the machine cannot be moved,what should I do?

First check whether the wires are correctly connected, whether the power switch of the control board is pressed, and then check whether the coupling is off.

What should I do if the control board cannot be connected?

Exit the software, unplug the wire, and reconnect it. Or update the firmware

How to modify the parameters when the limit switch is activated?

Enter 21=1 and 22=1 commands.

The engraved image is reversed,what should I do?

Enter 3=2 or RST=*command

WHAT ARE PACKAGE INCLUDE?

1 Set 3 Axis 3018 – Pro CNC Router Engraving Milling Machine Kit+1PC Offline hand controller+1PC ER11 Collet 3.175mm+1PC 24V DC 5A Power Supply+10 PCS Tip 0.1mm, 20 ° phi 3.175mm Drill Bit+4PCS plate clamps+1Set Allen Wrench+2PCS ER Wrench, etc

【 PACKAGE INCLUDE】-1Set 3 Axis 3018-Pro CNC Router Engraving Milling Machine Kit+Accessories(1PC GRBL 1.1f Control Board+1PC Offline hand controller+1PC 775 spindle motor+1PC ER11 Collet 3.175mm+1PC 24V DC 5A Power Supply+10 PCS Tip 0.1 mm, 20° φ3.175 mm Drill Bits+4PCS plate clamps+1Set Allen Wrench+2PCS ER Wrench+1PC Brush+1PC Spindle motor harness 60cm+3PCS Stepper motor harness 60cm+1PC 4G USB flash drive (include the english user manual & GRBL software))
【775 SPINDLE MOTOR】 – Spindle parameters:10000r/min; Mounting hole diameter: M4 screw hole; Mounting hole pitch: about 29mm; Motor shaft diameter: 15mm; Motor diameter: 42mm; Drill clamp parameters: ER11-3.175mm(can be replaced 0-7mm ); Control software: grbl control(candle); Supporting files: G-code (.nc/.txt/.tape/.gcode…); Processing accuracy: About 0.2mm; Power: DC 24V 5.6A power adapter (input voltage 110-240VAC)
【OFFLINE CONTROLLER】- Offline controller can control CNC milling machine offline without connecting to PC. The starting engraving position of X,Y,Z axis can be adjusted manually, the spindle and cooling fan can be turned on or off manually. After saving the file, the offline controller can be connected to GRBL control board without connecting to computer for operation.
【GRBL1.1 CONTROLLER BOARD】- (1)GRBL board supports emergency stop and X/Y/Z axis limit functions, which can be used together with the emergency stop button and limit switch on the engraving machine to ensure a safe and easy working environment.(2)Other functions and features such as: maximum support for spindles with 2000 rpm, tool setting (probe), offline controller, with power switch and silent fan cooling.
【APPLICABLE ENGRAVING MATERIAL】- Apply to Wood, plastic, acrylic, PVC, PCB, carbon fiber, density plate, plastic phone cases, rubber stamps, copper, aluminum and other soft materials. MUST be noted that materials such as jewelry, jade, stainless steel, stone, ceramics and other similar materials are not supported.
【ADVANTAGE】①Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers; The CNC3018-PRO machine is very easy to install,stable structure ②.Cancel the drive modulle, integrate the imported stepper motor drive, and comes with short circuit protecttion, ③.Add offline recognition function, you can insert offline controller and computer at the same time. The machine will automatically recognize it.④.Enhanced spindle drive. It can support 20,000 rpm spindle. Support higher power spindle. ⑤Increase the power button switch⑥.The spindle supports 0-100% adjustable PWM power. Support PWM / TTL signal control, power 0-100% adjustable!
【AFTER SALES SERVICE】 If you get stuck, Contact us with any questions that arise. Our customer service team is always ready to assist with any questions you may have.