Gorilla 2 Part Epoxy, Clear Epoxy, 0.85 Ounce Syringe (Pack of 1) – 5 Minute Set, Incredibly Strong Bonding
$5.97
Related Products
Gorilla takes epoxy to the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, clear finish that makes projects look spotless.
Directions:
1. Prepare Your Work Area and the Surface
If you’re using Gorilla Epoxy for the first time, or bonding a new type of material, we always recommend trying a test piece first.
Prepare your work area: It is recommended to use Gorilla Epoxy in a well-ventilated area. Be sure your work area is protected from spills. Gather your mixing tray and stir sticks so that all your supplies are together.
Prepare the surface: To improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded.
2. Mixing Gorilla Epoxy
Remove the black cap from the two syringes. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip.
Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. The package itself can be used as a mixing tray. If you flip the plastic blister shell over, you can use the small well as a starter dish to begin dispensing until both the resin and hardener are flowing equally. Once the flow is even, move to the larger mixing well to dispense your even ratio.
Mix the two parts for about 20 seconds, until the mixture is uniform. Apply within 5 minutes.
As you mix, you will notice that the epoxy warms up. This is a reaction that occurs as the resin and hardener combine.
3. Application
After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply.
4. Clamping
To reach maximum bond strength, clamp project together and leave undisturbed.
Important Cure Times
Set: 5 minutes to apply and position
Handling: Allow to cure for 30 minutes undisturbed (no weight or handling)
Final Cure: Allow 24 hours for load-bearing weight
Storage: To close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly.
Is Discontinued By Manufacturer : No
Product Dimensions : 1.13 x 3.38 x 8.69 inches; 0.85 ounces
Item model number : 4200101
Department : Unisex-Adult
Date First Available : April 1, 2008
Manufacturer : Gorilla
ASIN : B001Z3C3AG
Best Sellers Rank: #145 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #1 in Metal Filled Epoxies
Customer Reviews: 4.5 4.5 out of 5 stars (19,150) var dpAcrHasRegisteredArcLinkClickAction; P.when(‘A’, ‘ready’).execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( ‘acrLink-click-metrics’, ‘click’, { “allowLinkDefault”: true }, function (event) { if (window.ue) { ue.count(“acrLinkClickCount”, (ue.count(“acrLinkClickCount”) || 0) + 1); } } ); } }); P.when(‘A’, ‘cf’).execute(function(A) { A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { “allowLinkDefault” : true }, function(event){ if(window.ue) { ue.count(“acrStarsLinkWithPopoverClickCount”, (ue.count(“acrStarsLinkWithPopoverClickCount”) || 0) + 1); } }); });
Dries clear: Our Gorilla Tough epoxy resin dries clear for a clean finish and incredibly durable hold; perfect for household and automotive repairs
5 minute epoxy: This epoxy resin kit in just one applicator has a 5 minute set time, plenty for repositioning and adjusting
Gap filling: Gorilla resin epoxy also acts as a gap filler, filling voids and bonding uneven or vertical surfaces
Water resistant: Our clear epoxy resin withstands moderate exposure to water for extra durability
Easy-to-use syringe: Gorilla Epoxy has separate barrels of epoxy resin and hardener to keep the epoxy from hardening; the syringes dispense evenly and include a cap for multiple uses
12 reviews for Gorilla 2 Part Epoxy, Clear Epoxy, 0.85 Ounce Syringe (Pack of 1) – 5 Minute Set, Incredibly Strong Bonding
Add a review
$5.97
Joe –
Rock solid little insurance policy
I reach for this Gorilla 2 Part Epoxy anytime I want something to never move again. Recently used it on a threaded insert that’s going to be holding some real weight, and this stuff basically turned it into a permanent feature of reality. The 5 minute set time is nice — there’s just enough working time to get things aligned, but not so long that you’re babysitting the project all night.I really like the syringe format because it keeps the ratio dead simple and you don’t waste half the tube guessing. It cures clear enough that it doesn’t look ugly if a tiny bit squeezes out around the edges, and once it’s cured, it sands and drills decently well if you need to clean something up after. Strength-wise it’s on a totally different level than normal super glue, especially for inserts, hardware, or anything that might see stress or vibration.Couple downsides: it’s a bit messy if you’re not careful, and once you crack open a syringe for a small job it kind of feels like you’re wasting some product unless you’ve got a few things lined up to glue. The smell isn’t horrible but it’s still epoxy, so ventilation is smart. It’s also not the cheapest adhesive out there, but for critical joints where failure would be a nightmare, it’s definately worth the cost.
Susan Bewley –
Worked Well for Our Projects
My husband bought this epoxy for fixing some decorative doors in our house that had slats coming loose. It worked and was the perfect size for our project. He said it had great adhesive strength and quality, and is always a great quality glue. It seemed the right thickness for the project, and he was overall happy with it.
Gatekeeper –
Gobble up your clog with a product that WORKS
This is a quality product. Worked very well on my clog. Followed the instructions and it paid off. It is apparently very strong and as one would expect it does not smell that great. However it packs a punch.
HONEST REVIEWER –
A Strong Bond, With a Little Mess
As is often the case, my experience with the Gorilla 2-Part Epoxy, Clear Epoxy, 0.85 Ounce Syringe was largely in line with expectations. The product description accurately portrays what you get: a two-part epoxy designed for rapid, strong bonding. For its intended purpose, it certainly delivers.The “5 Minute Set” claim is pretty accurate, meaning you don’t have a lot of time to fiddle around once you’ve mixed the two components. This is great if you need a quick fix, but it also means precision is key from the get-go. The bond itself? Incredibly strong, as advertised. I’ve used it for a few minor repairs around the house, and each time the repaired item feels as solid as new. It held up perfectly to the tasks I threw at it, providing the kind of durable bond you’d expect from a brand like Gorilla. The clear aspect is also a definite plus, as it doesn’t leave unsightly colored marks on the repair.However, where the product falls a little short of being a truly stellar five-star item for me is in its usability, specifically the “messy to use” aspect. While the syringe packaging is generally convenient for dispensing two parts, I found that getting a perfectly controlled and clean application was a bit of a challenge. There’s a slight tendency for a tiny bit of overflow or for the mixed epoxy to ooze a little more than I’d ideally like, even with careful pressure. This isn’t a dealbreaker by any means, but it does mean you need to have some paper towels or a cleaning cloth handy and be prepared for a bit of cleanup afterwards. It’s not quite as neat and precise as something like a glue pen, for example.Ultimately, this Gorilla epoxy is a solid, reliable product that does exactly what it says it will: create an incredibly strong bond quickly. It earns a solid four stars from me because it perfectly meets its functional description and delivers on its promise of strength. It’s a great go-to for repairs where durability is paramount. However, the minor messiness associated with its application keeps it from reaching that elusive five-star status of being truly exceptional or exceeding expectations in every regard. It’s a good tool, but not a perfect one.
LHong –
Perfect for a super strong adhesive bond!
Works as advertised! Very strong permanent hold. Great for all types of projects.
Average Joe –
Perfect for concrete
Great product – made it easy to glue a concrete planter back together. It dries quickly and with a strong adhesion.
Griff –
Does the job
It’s decent epoxy. Did the job I needed it for.
Andy –
using this epoxy to assemle golf clubs. It’s great to have a clear finish product that doesn’t smell so much and it is still strong enough.The smell is like something is burning, as opposed to a deep chemical smell.Easy to mix with the 50-50 design, mix it up and will dry quickly.Long setting for final use
Mohsen Galal –
جربت انواع كتير ، ده أفضل نوع.طبعا أغلى كتير من أي نوعية اشتريتها ، صناعة امريكي.
Serious Shoppers –
Although there was a problem with the product, the seller has went over and above to resolve the problem. you can’t beat that. Thank you!
imugaibel –
جربته بلاستك مع حديد وانتظرت ٢٤ ساعة وانفك بسهولةمع اني اتبعت التعليمات
Anuar Alarcon –
De buen precio y muy fácil aplicación. Tienes que espera unas 24 horas para que cure al 100% y veas los resultados finales. La presentación permite su uso sin desperdicio y de manera medida. Muy recomendable.