CRAFT RESIN 34 Oz Crystal Clear Epoxy Resin Kit – Food Safe & UV Resistant for DIY Art, Wood, Jewelry Making, Coasters, Molds Casting Resin Epoxy – Low Viscosity, Self Leveling for Beginners & Pros
$0.53
Related Products
Product description
1 For Jewelery
2 For Coating
3 For Art
4 For Home Decor
UNLOCK YOUR ARTISTIC POTENTIAL WITH CRAFT RESIN
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. arts&crafts resin video Merchant Video
ALL YOU NEED IN ONE SET 
BENEFITS OF CRAFT RESIN
1 PERFECT FINISH
2 NO BUBBLES
3 EASY TO USE
4 3X UV RESISTANT
THE CLEAR CHOICE FOR ARTISTS AND CRAFTERS 
Is resin safe to use, and is it non-toxic?
Craft Resin is non-toxic, VOC-free, and solvent-free, emitting no harmful fumes. Fully cured, it’s safe for food-contact items like coasters or trays. Certified safe, it ensures stress-free crafting for home and professional use.
How long does it take for resin to fully cure?
In about 18 hours your project should be hard to the touch. After 24 hours it will be fully cured. After 21 days it will be heat and scratch resistant.
How can I prevent bubbles in my epoxy resin projects?
To avoid bubbles, ensure your resin and hardener are at 21-24°C or 70-75°F, mix them slowly and steadily, pour in layers no thicker than 1/4 inch, and use a heat torch to eliminate surface bubbles.
Why are my projects not curing?
Check your workspace temperature 21-24°C or 70-75°F. Ensure resin & hardener ratio is equal by volume, mix for 3-5 minutes, and allow more time for thin or thick layers. If steps were incorrect, curing may fail, requiring a restart.
Will Craft Resin yellow over time?
Craft Resin resists yellowing with UV stabilizers and advanced additives, keeping it crystal clear for decades. Avoid direct sunlight and note that added reflective items like yellow flowers may create color reflections, not actual resin yellowing.
COMPARE AND CHOOSE YOUR PERFECT FORMULA
Mix Ratio
1:1
Mix Ratio
1:1
Mix Ratio
2:1
Recommended Pour Depth
1/4 inch (6mm)
Recommended Pour Depth
1/8 inch (3mm)
Recommended Pour Depth
Up to 2 inch (5cm)
Work Time
40 min
Work Time
40 min
Work Time
40 min
Fully Cured Time
24 hours
Fully Cured Time
36 hours
Fully Cured Time
48 hours
Mixed Viscosity
1400 cps
Mixed Viscosity
3800 cps
Mixed Viscosity
600 cps
Package Dimensions : 6.57 x 5.99 x 3.44 inches; 2.65 Pounds
Item model number : 34oz
Date First Available : September 25, 2019
Manufacturer : Craft Resin Limited *L*ondon Pride
ASIN : B07YCVVYFK
Best Sellers Rank: #707 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #2 in Industrial Coatings
Customer Reviews: 4.5 4.5 out of 5 stars (16,527) var dpAcrHasRegisteredArcLinkClickAction; P.when(‘A’, ‘ready’).execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( ‘acrLink-click-metrics’, ‘click’, { “allowLinkDefault”: true }, function (event) { if (window.ue) { ue.count(“acrLinkClickCount”, (ue.count(“acrLinkClickCount”) || 0) + 1); } } ); } }); P.when(‘A’, ‘cf’).execute(function(A) { A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { “allowLinkDefault” : true }, function(event){ if(window.ue) { ue.count(“acrStarsLinkWithPopoverClickCount”, (ue.count(“acrStarsLinkWithPopoverClickCount”) || 0) + 1); } }); });
ARTISAN APPROVED QUALITY – Unlock your artistic potential with Craft Resin. Premium clear epoxy resin kit and hardener allows you to create beautiful pieces with a glass-like finish and no yellowing over time. Popular for DIY art, tabletop coating, mold casting, canvas, coasters and jewelry making.
BUBBLE-FREE, NO YELLOWING – Are you tired of dealing with the frustration of bubbles and uneven finishes in your resin projects? Our advanced formula is an innovation on the epoxy resin market. Release air bubbles automatically when the resin is warm, recommended depth 1/4 inch.
CERTIFIED, FOOD SAFE EPOXY – Craft Resin epoxy made with low odor, non-toxic, free of VOCs & solvent materials – food grade epoxy resin perfectly formulated for home and professional use. Harmless to you and the environment, when used as directed.
FAST CURING, HEAT RESISTANT – It takes only 24 hours for our crystal epoxy resin to cure. After this time it becomes rock hard, scratch resistant, advanced additive resistant to heat up to 203℉ (95℃). You’re going to have a crystal clear, glassy smooth finish which will last for years.
EASY TO USE, 1:1 RATIO – Our 2 part epoxy resin kit is simple to use, even for beginners. Kits include resin (17OZ), hardener (17OZ), reusable mixing stick, gloves, manual. Upgrade your resin game and elevate your art to the next level with Craft Resin supplies.
13 reviews for CRAFT RESIN 34 Oz Crystal Clear Epoxy Resin Kit – Food Safe & UV Resistant for DIY Art, Wood, Jewelry Making, Coasters, Molds Casting Resin Epoxy – Low Viscosity, Self Leveling for Beginners & Pros
Add a review
$0.53
Khristin Vargas –
Great Resin for Beginners
I never really write reviews but thought this would be a good one to provide for beginners. I used this resin for my 2nd resin project and it came out beautiful. Granted I’m no expert at this resin hobby, and it was barely my second project, but using this product was fairly easy. Takes patience and time but overall I didn’t find the product to be difficult to work with and not as many bubbles as the first resin I used. Also dries way faster than 24 hours. I did a thick rectangle tray and it dried overnight about 10 hours, however I did it in sections by only pouring a quarter inch of resin on each time and allowing it to cure then adding another layer. Took a couple of days but I think for second time using resin it came out really good.
Sandra Bronga –
Easy to use, clear finish, and best of all cleanup is easy!
Easy to use, mostly clear from bubbles and torch will get most of them. Cures extremely well overnight to at least hold it to light and admire the finished project. Residue on you easily removes with alcohol. I buy a lot of this resin and work many, many projects with it.
Maineiac –
Great Quality and Price
The mark of a good product it seems would be if someone purchases it again. That’s the case with me. Maybe a couple of years ago now I purchased this brand of epoxy for small craft/hobby projects…quite often just putting a thin epoxy coat on either a stone or wood base for a project I was making. It worked extremely well for me for that purpose of quick, small projects, so much so that I went through the supply, thus needing to repurchase with this larger amount.I’m extremely pleased with the quality of the product. No odor. Dries quickly and gives a beautiful clear-coat finish vastly improving the appearance of my projects. I’m extremely pleased. For it’s price-point and its quality that is proven in my experiences, I don’t need to look any further. It’ll will be a while, but when I am in need for more, will definitely repurchase.
Christopher Miller –
CLEAR / BUBBLE FREE
I was concerned when I bought. I wanted to Start making crafts with resin. I wanted to have clear and bubble free resin. This seem to do the trick as long as you mix it correctly. If so you won’t get a bunch of bubbles are foggy color. I like to set my mixing bowl and warm water as a mix A /B. It seems to mix together a lot easier and it pours easier into project.
Charles Mortel –
Great to use for coasters and decorative molds.
Great product!! Easy to dispense and its viscosity makes it easy to work with. I wouldn’t use this product in an unventilated room though, since there are still fumes created. Mixing the product still produces bubbles so we still had to use heat to get the bubbles out. Even with these issues, the resin dries clear and hardens within 18 – 24 hours.
Alyssa Bottinelli –
Easy to use and great final result!
First time using epoxy resin, followed the directions exactly as written, and the final product came out AMAZING! 100% would recommend and will be buying again.
Brittany Whitehead –
Awesome
Excellent resin! Only complaint is the pumps are hard to use with the part A. Otherwise, great quality and easy to use!
Crystal –
Not worth the buy
This is not my first time using epoxy so I know to use equal parts. But this is the first time I have used a brand that did this. The epoxy is watery. Part B should be a little thicker than part A and when combined it should not be watery. I used on a clean surface and the epoxy when on just fine I thought it would be a good find. But ask I keep watching I noticed that it kept pulling away. Well after 24hrs the first 3 pics are the results. So I sanded then cleaned area this time I mixed 2 small cups and allowed one of the cups to sit fir a min to get thicker. I then poured the one thick cup on top and the other cup and it seem to cure a little better, which is the 4th and 5th pic. It still pulled away from the edges. (Dont let it sit too long bc it starts to get warm and hard fast.) So I did 2 more tables one of the tables I done the first coat then wait a few hours then done a 2nd coat then a 3rd coat. Using alot more epoxy then normal that table took better but still pulled around the edges. ( 6th, 7th, and 8th pic). Now this last table is guess it gave up bc WTH, this is 2nd coat. I guess ill just have to spend the extra money and go back to what I was using at first. Dont want to throw this out so I guess i gsve to try to major adjustments and use it up and do more coats then im use to doing.Update: applied another coat to all 3 tables again and still terrible results. Last 4 pics.
Peter –
Fantastic quality as expected with Craft Resin, its a 1:1 mix which makes it incredibly easy to follow, large openings to prevent mess, it sets solid. The viscosity is great for many crafts and allows for a steady poor. Not too thick and not too thin. Keeps projects clean and tidy and it looks brilliant.
ellym –
Very easy to mix and use and have a good clear glass finish.
Karen –
1:1 ratio and so very easy to use without the big chemical smell you get from other resins.
Manal Mawad –
بصراحه منتج رايع وسهل ولايوجد فيه فقاعات وكانت هادي اول تجرّبه لي ممتاز
Shafu –
The resin is quite thick and not flowing, I had to use my hands to spread it as it was not flowing. Strong smell, states No smell on the product. Less working time than normal resin, just about 20- 25 min than 35-45 min in normal resin products. Not happy with the product.Positive- No bubbles formed, so that was good. Quick Delivery but not packed properly as box was already broken