Dorhui 50W LED Exposure Unit for Screen Printing, UV Screen Printing Exposure Light and Light Stand for Screen Printing Kit Photo Emulsion Kit
$33.99
Related Products
Product description
Real UV Light
The real UV light is strong enough to develop cyanotypes and to burn the screen.
Not Subject to Site Constraints, The Installation of Flexible
The light stand adopt two-way clamps for convenient install, it can be mounted on tables, wall edge, storage shelf, etc. It can be used anywhere and anytime without venue restriction. And the stand can be folded, easy to store and carry.
UV Wavelength: 395nm
Voltage: 110V
Power: 50W
You can use an inkjet printer and transparency film to print any image you want.
Take the squeegee and use it to spread a thin layer of emulsion evenly across the screen.
Get the best possible results for your prints by using our UV light to determine the ideal exposure time.
Use a sprayer or hose to blast the screen with a strong stream of water.
Coat the screen frame with ink and commence with the printing process.
Enjoy the process of designing and donning your personalized T-shirt to make it uniquely remarkable.
Dorhui LED UV Screen Printing Exposure Light
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.2 out of 5 stars 224
4.2 out of 5 stars 224
4.2 out of 5 stars 224
4.2 out of 5 stars 224
4.2 out of 5 stars 224
Price
$14.99$14.99 $21.99$21.99 $34.99$34.99 $21.99$21.99 $33.99$33.99
Power Wattage
25W 25W 2Pack 25W 30W 50W
Adjustable Stand
Built-in Adjustable Angle Stand Height and Angle Adjustable Stand Height and Angle Adjustable Stand Height and Angle Adjustable Stand Height and Angle Adjustable Stand
Switch Button
✓
✓
✓
✓
✓
Voltage
110V 110V 110V 110V 110V
UV Wavelength
395nm 395nm 395nm 395nm 395nm
50W UV Exposure: The UV exposure lamp has a wavelength of 395nm . This 50W UV screen printing lamp provides uniform illumination, significantly reducing the curing time of photosensitive emulsion, with an exposure time of approximately 3-5 minutes, depending on the emulsion thickness.
Adjustable Height and Angle Light Stand: The height and angle of the light can be adjusted according to specific need, it will make sure you get the prefer exposing effect. The distance bet the light and plate can range from 1″ to 20″. The light can rotate by 360°, and make after curing more even and no dead corner.
Large UV light for Screen Printing: Each LED bead is equipped with a high-transmittance glass cover that provides a 120-degree projection angle, maximizing light efficiency and enabling effective curing of larger items.
Easy Operation: Equipped with a 1.8-meter US standard plug and an easy power switch design, it allows for easy control of curing time, so you can operate it effortlessly without frequent plugging and unplugging.
Safety and Stability Stand: This UV light stand base weighs 950 grams and features a non-slip design, providing exceptional stability to prevent tipping or tilting. It comes with detailed installation instructions for quick and easy setup; when not in use, the stand can be easily disassembled and stored, greatly enhancing convenience for daily use and space management.
13 reviews for Dorhui 50W LED Exposure Unit for Screen Printing, UV Screen Printing Exposure Light and Light Stand for Screen Printing Kit Photo Emulsion Kit
Add a review
$33.99
Trevor Stark –
Excellent value, gets the job done!
Extremely well priced. It’s not the most amazing build quality, but I don’t think you need it to be if you’re just exposing some screens casually as a DIY screen printer. It exposed at 16″x16″ design at 12″ away for 12 seconds and the art turned out great. I could have used even less time for the exposure. Saves a lot of time over a BBA Photoflood incandescent bulb. This is a great upgrade.
redstar –
Wish I had bought these sooner
These work great. They are super simple to set up, move around easily, have great reach, and work really well.
Andrew –
Quick exposure for screen printing
Seems to work well. The clamp doesn’t really hold on very well but can make it work or modify.Exposure time for Ecotex PWR(water based ink emulsion) on white 230 mesh was <2 seconds, 14" from the screen.
RUB –
Flimsy
The light works well. The structure of the light is flimsy and very hard to keep an angle.
Heidie B –
Just as pictured
Just as expected.
Melissa Cadavid López –
Excelente producto
Excelente producto
DSN –
I should have returned this item; NO INSTRUCTIONS. Read The Reviews!
I realize this unit was inexpensive and advertised as easy to assemble; however, as no instructions were included. I cannot see how the light is attached to the unit. It appears it should just snap into the holder; the so-called holder does not secure the light. Very frustrating. I am a couple days past the return date; I tried to contact the vender- no response. I will call Amazon and see if they might accept a return.
Kindle Customer –
Fast exposure. Perfect results.
Works perfect. Coming from a professional screen printing background. My exposure time is 30 seconds with Ap Blue emultion. At 17” away
melissa –
De muy buena calidad
eileen simms –
Flimsy and hard to aim properly.
Andy Morris –
The stand and assembly is super flimsy, but for the price I was ok with it. But then today, maybe the 7th time using it, it stopped working and no longer turns on.It has been less than a month and I am returning it. I’ll be looking for another product.
fernando cardona –
entrega antes de lo prometido, excelente vendedor
gustavo ibarra camacho –
la verdad compre el articulo e hice barios intentos para revelar un marco y no logro catalizar la emulsiónincluso de cerca le llegue a dar 20 min con las lamparas y la emulsión se caía muy fácil