CNCTOPBAOS Upgrade CNC 3018-PRO 3 Axis DIY Mini CNC Router Kit with GRBL Remote Control Offline Controller PVC PCB Acrylic Plastic Wood Cutting Engraving Carving Milling Machine
$140.00
Related Products
Product description
Package include:
1Set 3 Axis 3018-PRO CNC Router Engraving Milling Machine Kit1x GRBL 1.1f Control Board1x Offline hand controller1x 775 spindle motor1x ER11 Collet 3.175mm1x 24V DC 5A Power Supply10 x Tip 0.1 mm, 20° φ3.175 mm Drill Bits4x plate clamps1Set Allen Wrench2x ER Wrench1x Brush1x Spindle motor harness 60cm3x Stepper motor harness 60cm1x 4G USB flash drive include the english user manual & GRBL software
CNC 3018-PRO w/ offline hand controller
Dimensions: 42x35x27cm (16.53 x 13.78 x 10.63”)Stepper motor: Nema17 stepper motor 42x42x34mm,1.33A,0.3N.m,43oz-inMaximum stroke: 30x18x4.5cm (11.8 x 7.1 x 1.8”)System support: Windows XP SP3,Win 7,Win 8,Win 10 (32/64 can be);LinuxPower supply: 24V 5.6A power adapter (input voltage 110-240V)Chuck specification: ER11 3.175mm (Can be equipped with 0-7mm)Processing thickness: 4.5cm (1.8”)Material: PA6 Nylon + Aluminum profileControl system: grblcontrol,USB interfaceDrill bits: 10pcs tip 0.1mm 20 degree φ3.175mmOffline control: GRBL remote controllerProcessing accuracy: About 0.2mm
GRBL controller board Connection: USB (USB-CH340)Software: GRBL controller, UniversalGcodeSenderInput voltage: 24VDCMaster chip: atmel 328P (arduino nano)Spindle drive chip: MOSFET (recommendation 24V, current : within 10ASpindle PWM speed: SupportSupport stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17/Nema23)Power Interface: 5.5-2.5mm DC interfaceSupport 3-pins module: support 0.5W-20W moduleSupporting file:G-code (.nc/.txt/.tape/.gcode)
775 Spindle Spindle parameters: 775 spindle motor (12-36V) 24V:10000r/minMounting hole diameter: M4 screw hole; Mounting hole pitch: about 29mm.Motor shaft diameter: 15mm; Motor diameter: 42mmDrill clamp parameters: ER11-3.175mm ( can be replaced 0-7mm )Control software: grbl control(candle)Supporting files: G-code (.nc/.txt/.tape/.gcode…)Processing accuracy: About 0.2mmMachinable material: Wood、 plastic、 PCB、 PVC、 carbon fiber、 acrylic、 density board etcPower: DC 24V 5.6A power adapter (input voltage 110-240VAC)
GRBL offline control Support SD card and TF card at the same time, standard capacity 1G.With this offline controller module, you can directly control the CNC router without connecting it to your computer.After inserting the file into the SD card,the engraving file can be directly identified. You can also use the micro USB cable to connect the offline hand controller board to your computer and save the file directly.Manually control: manually adjust X,Y,Z axis location as engraving starting point,manually open or close spindle,manully open or close cooling fanFile engraving: after off-line controller save file, it can connect the GRBL control board and process engraving,no need to connect PC computerSave file: after the off-line controller connect PC,it will be recognized as USB,large capacity storage device, can access engraving file directly.SD shows it is SD card condition,turn on power supply after insert SD card,otherwise,it won’t work.SD card capacity 4G could be recognized.
Advantages
Support oftware: GRBL controller,Candle, UniversalGcodeSenderAdd emergency stop button port,tool probe port and XYZ limit port.Power supply:24V DCThe spindle supports 0-100% adjustable PWM power.Support limit switch, tool setting, steering gear, cooling fan and other functions.Support PWM / TTL signal control, power 0-100% adjustable!Increase the power button switchCancel the drive module,integrate the imported stepper motor drive,no need to worry about module damage. And integrated heat dissipation aluminum alloy.Add offline recognition function, you can insert offline module and computer at the same time. The machine will automatically recognize whether it is controlled by the computer.Enhanced spindle drive.can support 20,000 rpm spindle.Add the fan port to force heat dissipation
Compared with the old version grbl 1.1 Add the function of X/Y/Z axis limit switches,optimized the XYZ limit port and the port connected to the device,making wiring and operation easier.After installing the limit switch, when the XYZ axis moves beyond the travel of the engraving machine, the limit switch will trigger the machine to automatically stop the movement.Add the function of emergency stop button,this function can be used when an emergency stop is required at work, making our work safer and more efficient.Add the power button switch and move the power switch button from the bottom to the side,simple operation,more safety in the process of using the machine.
Support two engraving methods
The control board support two engraving methods,our package comes with a spindle motor but without the module in the picture above.
Q&A
Q: What materials can the milling cutter generally engrave or cut?
A: Wood, acrylic (acrylic), pcb, pvb, soft metal, iron, glass, stone etc.
Q: What thickness of wood or acrylic can generally be cut by module?
A: 3-5mm wood board (acrylic), speed setting 100, power setting 1000;
Multiple cuts can cut 12mm wooden boards by spindle.
Multifunctional The terminal of limit switch,tool setting and emergency stop button are all 2-pin 2.54mm sockets.Add the outer casing: protect control board in transit,to avoid short circuit problem during use;Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy;Add the fan port to force heat dissipation;Add offline recognition,can insert offline modules and computers at the same time.Offline will automatically identify if there is computer control.Enhanced spindle drive,can support 20000rpm spindle.support more powerful spindle.Improved USB interface: the original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong;The spindle drive increases the optocoupler isolation, which makes the control board generate less heat, and the spindle speed adjustment is more linear and safer.
Add Offline controller
GRBL Offline Controller
(1) Main Page
Ctrl: Machine Control; File: Use the Gcode file; Press [Y+] [Y-] to select; Press[Ok] to Enter
(2)Control Page
X± Y± Z±: Moving AxisOK/Spindle: Spindle ON/OFFExit/Step: Change Step/Exit (long press)How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed.How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.
(3)File Page
Common supported formats include nc. tex. tap.Press [Y+] [Y-] to select filePress [Ok] to EnterPress [Ok] to begin if you are readyNote:Long press [Exit] to stop machining
Applications CNC 3018-PRO Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;3018-PRO cnc machine is very easy to install,with stable structure.Main application:can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other metal materials, but can not carve hard metal, jade or other very hard texture of the items.If you change the spindle to a module,then also can carve the kraft paper, wood, leather(wallet), bamboo, rubber.
Q&A
Q: The X,Y and Z axis of the machine cannot be moved,what should I do?
A: First check whether the wires are correctly connected, whether the power switch of the control board is pressed, and then check whether the coupling is off.
Q:What should I do if the control board cannot be connected? A:Exit the software, unplug the wire, and reconnect it. Or update the firmware.
Q: How to modify the parameters when the limit switch is activated?
A: Enter 21=1 and 22=1 commands.
Q: The engraved image is reversed,what should I do?
A: Enter 3=2 or RST=*command
GRBL software Our parcel include a 4G USB flash drive,you can download the english user manual and GRBL software from the flash drive.File formats supported by the software: *.nc, *.ncc, *.ngc, *.tap,*.txt and *.cnc.Software used to create Gcode: Carbide Create, Artcam, MeshCam, Fusion360, Inkscape etc.
Model: Upgrade Version 3018-PRO with Offline Controller; Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers; You can operate this machine without connect to the computer; offline controller included a SD card reader to write into the root directory G-code files or NC file; Support manually adjust X, Y, Z axis location as engraving starting point,manually open or close spindle
Working area:300x180x45 mm / 11.8 x 7.1 x 1.8″;Frame size: 420x350x270mm / 16.53×13.78×10.63″; Type: USB Port Desktop cnc router ; Spindle: 775 spindle motor 120W 12-36V,10000rpm/24V; Motor: Nema17 Stepper Motor 1.33A,42x42x34mm,0.3N.m,43 oz-in
Upgraded GRBL1.1f Control Board: Added the outer casing,E-stop button port,tool setting probe port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support max 20000rpm spindle,and also can support 12V 3-PIN 0.5W-20W engraver module
Main application: Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.and soft metal like copper and aluminum and other materials; Supporting files: G-code nc/txt/tape/gcode
GRBL Software: Our parcel include 4G USB flash drive,pls download the installation instructions,user manual and GRBL software from the USB flash drive; System requirements: Windows XP SP3,Win 7,Win 8,Win 10 32/64 can be and Linux
12 reviews for CNCTOPBAOS Upgrade CNC 3018-PRO 3 Axis DIY Mini CNC Router Kit with GRBL Remote Control Offline Controller PVC PCB Acrylic Plastic Wood Cutting Engraving Carving Milling Machine
Add a review
$140.00
Matthew –
She’s just a little one!
Don’t get too ambitious!This is a great starter CNC machine, but it is just a little guy. So I got this machine because I am a hobby starter. I start many hobbies but rarely stick to any one very long; so this was perfect for the budget I allowed myself and I’ve been pleasantly surprised with its ability. As long as a piece being carved is not wider than a piece of paper is tall you can do alot if you get creative. I’ve carved dozens of pieces on this machine now and it just keeps on keeping on. I carved a 6 foot long wall ruler once and just had to add a long board as a roller support on one end and break the carved up into 7 parts.Noise level: kinda sounds like a high pitched animal whine most of the time and sound like the bit might break at any point but I have only had the tip break off of one of the bits that came with it so far because I set one of the clamps right in the carved path… Wouldn’t recommend carving inside with this thing but great in places such as a garage away from ears that don’t appreciate the art process.Ease of assembly: Not hard to assemble in my opinion. Be careful with the direction the supports are facing on the board because if you get those wrong you will decrease your workspace by a lot. Connection to my computer was also pretty simple just using the included instructions. Easel has been my favorite free online software to use when creating designs and running the machine.I recommend getting some larger bits like 1/8in straight cuts and keep the spindle speed up about 8000 rpm, a cut depth of .03in per pass a cut speed of 30in/min and a plunge rate of 9in/min. Those are the settings I use most of the time but recommend doing your research and experimenting to see what works best for you.Overall it is a fun machine that if you are patient with will turn out some great pieces.
Jarl MacSalt –
Not for Novices at all!
The CNCTOPBAOS Upgrade CNC 3018-PRO router kit DOES NOT include limit switches, probe, or emergency stop switch; the control board does have locations to add them on but no hard points for mounting. Assembly was pretty easy, but the operation of the machine itself is definitely Not for novices; the learning curve is more like straight up!It’s a shame, that an entry level machine is so poorly user friendly. Twill revamp my review when I see it working !
T Perry –
Superb machine to create small parts on, or to learn 2.5D CNC
It’s amazing what is available to us today. For less than $150 this little CNC is surprisingly capable and precise. My first day running it I designed and carved a desk sign, hardest part is learning the software. I’ve already tried a few programs to see what works best for me. Carbide Create looks like a winner, but you have to find and download version 6; they crippled version 7. I am also learning FreeCAD from YouTube tutorials. There are several good channels that have more than enough information to get up and running. I’ve wanted to learn CAD for a while, and this machine already has me wanting something bigger. Not to replace it, as it will still be useful for anything that fits on it’s bed, but to be able to make larger projects. Gotta say that the one and two star reviews really sound like Karens who couldn’t be bothered to actually put any effort into it!
Satisfied –
Satisfied
This item is functional, but the software could not be uploaded. Warnings as to virus. This CNC software can be uploaded from other sources. The supports that hold a project down are flimsy but double sticky tape can be used for some projects.
Dude! –
Pretty fun small mill
So far it’s pretty good. It seems like it can cut out full contours… At least from what I could tell in the grbl software when I loaded up some g-code for a half sphere through fusion 360. I need to make some adjustments to the clearance passes though to adjust for max travels. No super critical projects yet completed, but if I can update with one later I will. I agree with others that have mentioned the use of the end stop switches. These would be extremely useful. I purchased the model with the offline controller and very much so like this option.I do want to make note that you cannot (unless I just haven’t found out how to do this yet) single pass the g-code like a real CNC mill would allow a machinist to work for prove outs. This would be extremely useful to avoid crashes on initial program operations for something with depth.I won’t say it’s a completely no brain operation… Someone trying to use this machine would be advised to freshen up on g-code and design unless there are websites out there like thing verse for mini mills.Motors are not too noisy. Assembly is easy. Movements are quick and smooth. Also, since the grbl firmware doesn’t seem to have any limits programmed directly into it, you could also upgrade the machine footprint to cut out larger items.
greenly –
Excellent Value
I’m a cnc machinist, and I know what a top of the line machine looks like. This is not one lol but, I bought this little machine to tinker around with some decorative wood carving. I didn’t expect much. Just some 2d stuff etc. I was pleasantly surprised by the machine and the open source control software. It’s not rigid and the spindle is both low rpm and torque. It’s accurate enough, it runs on (mostly) standard G code, and it does what the seller claims it will do. Over all, I expected a lot less for the price and would recommend this unit to for someone who is just starting out. Or needs to carve small projects from softer materials.
ARG –
Terrible product
I purchased this to engrave small lettering in plexiglass, and coming from a CNC background I figured this wouldn’t be much of a problem as I am very aware of the limitations of this product. When it arrived, I was shockingly disappointed. The construction was fine, but the linear bearings had so much play that it couldn’t engrave pine with a 1/2mm depth of cut at a slot feed rate. I could move the spindle roughly an inch front to back just with my fingertips. I ended up rebuilding the entire router using MGN linear rails, but then the control board failed immediately after. Literally no part of this machine ended up being serviceable in it’s factory configuration. Pretty much a 100% waste of money.
Alejandro morales –
Buen producto y buena calidad respecto calidad precio
The Kannan Electronics –
Waste of money while it’s rate worth only 10000 to 15000 but it saled at 34000… machine like as tays…
Josh TL –
Muy buen producto, fácil de instalar y usar
Carlos Alonso –
Recomendable, es económico, buena calidad y funcional.
felix eduardo guerra gonzalez –
Sirve perfecto para hacer moldes en acrílico para luego hacer matrices de, silicon y resina.