ANYCUBIC Wash and Cure Machine 3.0, 2 in 1 UV Washing and Curing Station for ANYCUBIC Photon Mono 4 2 Mars Series LCD/DLP/SLA 3D Printer Models, with Twistable Gooseneck Light
$85.49
Related Products
Product description
1 Washing Size Upgraded
2 Larger Curing Size
1 Localized Strengthening
2 Uniform Curing
3 Rotary Curing
Great Compatibility
Anycubic Wash & Cure 3 is perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less.
More Durable
Cleaning basket made of PP material (rust-resistant) VS the previous generation’s metal material (prone to rust)
Simple operation
With the infinite rotary knob control, Wash&Cure 3 can adjustable from 1 to 30 minutes at will. And it’s easy to switch the dual modes
Low Noise
The new wash and cure station can creat a quieter and more comfortable working environment.
Dual-layer design, Optimizing Efficiency in Detergent Use 
Specifications 
【Localized Strengthening, Uniform Curing】The “Innovative Flexicure Gooseneck Light Design” increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the local curing effect. By adopting a brand new arrangement of light beads and Lens light source, wash and cure 3’s curing uniformity has been enhanced by 20%, bringing in a more thorough and comprehensive curing of the entire model
【Larger Wash&Cure Size】Anycubic Wash & Cure 3’s maximum cleaning volume is up to 165*100*180mm, The total volume of the cleaning bucket has been expanded to 4L. The curing size is up to 160*180 mm, to accommodate larger and more models for single post-processing session
【Detergent Saving】Anycubic wash and cure 3 machine’s double-layer PP material cleaning basket designed with two heights at 3.93” and 6.5’’, to flexibly accommodate print platforms from 5.9″ to 7.3″. The amount of IPA used can be adjusted according to the heights of the model to achieve savings
【Wide Compatibility】Enlarged size enables ANYCUBIC Wash & Cure 3 Station to be compatible with anycubic photon mono 4/2, mars 3 series, mars 4, mars 4 ultra and other consumer-grade resin 3D printers measuring 7.3” and below available on the market
【Simple Operation, Quiet and Efficient】One click to select cleaning and curing dual mode & switch the Gooseneck light curing mode. Infinite rotary knob control, 1 to 30 minutes adjustment. Besides, The decibel when the machine is running does not exceed 65db and will not disturb normal life and work
13 reviews for ANYCUBIC Wash and Cure Machine 3.0, 2 in 1 UV Washing and Curing Station for ANYCUBIC Photon Mono 4 2 Mars Series LCD/DLP/SLA 3D Printer Models, with Twistable Gooseneck Light
Add a review
$85.49
Morty –
Saves time
If you’re constantly printing out a lot of products, I think this would be useful for you and your business. It eliminates the time it takes to cure it and wash your prints. Usually I could have this running in the background, and I can paint my other prints.
Ray Martin –
Works well
I think anyone who resin prints should purchase a clean and dry station. This one works well and even though I think its a bit over priced, I would definitely purchase it again. They are built sturdy and should last a good long time. They are quality products. The instructions are easy to read and its easy to use.
Reemberto J. Parada –
Amazing resine 3d printer.
I’m really happy with tjis 3d printer! It arrived quickly, was well-packaged, and matched the description perfectly. The quality is great for the price, and it works just as expected. I’ve been using it for a while now and haven’t had any issues. Definitely a good purchase I would recommend it to anyone looking for something reliable and well-made.
Eric –
Massive time saver with some minor issues
Pros:Easy to useCuts curing time from hours to minutesWash and cure in the same placeCan’t accidentally start with curing without the coverLarge tub, basket will hold the build plate from the Photon UltraCan wash longer than 10 mins at a timeMostly quiet, no excessive power usageCons:Basket drips on the inside surface when it’s pulled up and latchedCan’t see the indicator light for wash vs cure unless it’s at eye levelKnob to set the time is extremely sensitive. Can literally change the time by lightly brushing itForgetting to change from wash to cure will fling anything on the bed in every directionRevolving bed jerks the first time when changing from wash to cure, slight but enough to shift the modelHard to empty the tubBasket openings could be a little closer, had tiny pieces fall throughHonestly the rating is more of a 3.5 at this point. I can’t imagine going back to the “old ways”. It just has a few too many minor issues to rate higher but does what it’s supposed to. Anycubic seems to have this problem consistently though…expensive machines that are the bare minimum to be extremely good but would be great for just a couple dollars more in parts and design time. They are the equivalent of the smart kid that settles for a B+
John Woodward –
Nice and convenient
Nice compact system. I especially like the USB powered light.
AFG TTRPG LLC –
Works well
Work like intended
Randy –
Makes post processing a breeze.
I was using a pickle jar, then a sonic cleaner, for cleaning and a UV nail light to finish curing my prints. I had been looking at this for a while. I finally decided to just get it, and I am happy I did. This makes cleaning and curing my prints so much easier. I wish I had purchased this sooner. This will make your resin 3D printing journey much easier.
Pablo –
Fixes the biggest problem with resin printing
The wash and cure 2.0 is an excellent option to wash and cure your prints, it takes away the most tedious part of resin 3D printing, and I love it for that.The clean station is a bucket with a metallic thing at the bottom that spins and moves the water around, it changes direction every two minutes with a weird low volume robot sound, it will let you know when it’s done with another sound, prints come out clean, although I prefer to rinse the prints before using the bucket, just to keep that material cleaner, so that it lasts longer.The cure station is pretty cool, it has a column of UV lights, and a adjustable 1 bulb light for those tight spaces, it’s cool, just remember to turn it on.Overall it’s a solid option, I like it.
Luis Pablo Cruz –
Excelente producto, tiene gran potencia para lavar y quitar el excedente que algunas más pequeñas no. La desventaja es que a grande la tina de lavado, por lo que requieres mucho alcohol para lavar las piezas pero obviamente dura más si usar resinas de un solo color y no de colores obscuros para que no se tiña el alcohol. En cuanto a la luz, es de gran utilidad las para el proceso de foto curado ya que permite fotopolimerizams más en dos niveles. Excelente para el Postprocesado de biomodelos para termoformados en una escala media.
Alejandro L. –
Facil de usar, muy intuitivo
Cliente de Amazon –
BUEN EQUIPO
Jorge Armando Moreno –
Me agrado el producto cumple lo descrito
Wallaz Romero –
Solo la he usado 5 veces para curar unas piezas y ya solo sirven 5 leds, habrá algún tipo de garantía?