YXPOLYER ABS Filament Marble Series 3D Printing Filament 1.75mm 1kg, Brown Beige Textured Tan 3D Printer Filament High-Heat, High-Strength & Moisture-Resistant, with Upgrade AMS-Compatible Spool
$19.99
Related Products
Product description
From Concept to Life with YXPOLYER ABS Filament: High-Strength ABS Robot Print 
Printed with YXPOLYER ABS to demonstrate superior layer adhesion, low warping, and stable large-format printing performance. Smooth finish and impact resistance make it ideal for durable prototypes and mechanical models.
Easy to Print with Low Warping & Low Odor 
Newly optimized formulation delivers excellent printability with reduced warping and minimal odor.
Durable and shatter-resistant for printing vases, lamps, and other décor pieces in homes with children or pets.
Optimized Balance of Toughness and Strength for Reliable ABS Printing 
Heat Resistant
Good material for humid, high-temperature environment; for printing heater hooks in the bathroom
High Strength
Tensile strength up to 50 MPa (tested at 50 mm/min) and notched Izod impact strength of 210 J/m (ASTM D256).
Low Odor
Formulated for minimal emissions during printing, providing a cleaner, more comfortable workspace.
Low Warpage
Reduces warping induced by interlayer thermal stress
Technical Data Sheet
Density 1.04 g/cm³ Melt Flow Rate 24 g/10min Tensile Strength 40 MPa Elongation at Break 12% Flexural Strength 64 MPa Flexural Modulus 2200 MPa Notched Izod Impact Strength 210 J/m Printing Temperature 220–260°C Heat Distortion Temperature 85°C
Strength, Flexibility, Heat Resistance – Side-by-Side Material Comparison
Add to Cart
Add to Cart
Add to Cart
Tensile Strength
40 MPa
65 MPa
35 MPa
20 MPa
35 MPa
28 MPa
30 MPa
Flexural Modulus
2200 MPa
3480 MPa
60 MPa
2100 MPa
3071 MPa
1440 MPa
1125 MPa
Moisture Absorption
Medium
Low
Medium
Low
Low
Low
Low
Printing Temp
220-260°C
195-220°C
210-240°C
220-260 ℃
220-260°C
220–260°C
220-260 ℃
Print Speed
≤ 350mm/s
≤ 350 mm/s
≤ 60mm/s
≤ 200mm/s
≤ 250mm/s
≤ 300 mm/s
150 mm/s
Low-Odor and Home-Friendly: Made from high-quality ABS raw materials that significantly reduce printing odor. Safe for indoor use and ideal for home, school, studio 3D printing environments.
Beginner-Friendly and Efficient: Prints easily at temperatures as low as 220 °C with a maximum speed of up to 200 mm/s. Designed to lower the print difficulty while improving overall efficiency.
Self-Supporting: Supports structural prints without dedicated support material and peels off cleanly by hand. The premium tan color adds a professional look, ideal for functional prototypes and display-ready models.
Tangle-Free & Low Warpage: Each spool is mechanically wound and manually inspected to ensure smooth feeding with minimal tangles. It offers low warping, good adhesion, and consistent results.
Enhanced Packaging for Longevity: Packaged in aluminum foil vacuum bags with a resealable strip, the filament stays dry and free from moisture. The transparent spool is durable and suitable for high-temperature drying, ensuring the filament’s quality over time
13 reviews for YXPOLYER ABS Filament Marble Series 3D Printing Filament 1.75mm 1kg, Brown Beige Textured Tan 3D Printer Filament High-Heat, High-Strength & Moisture-Resistant, with Upgrade AMS-Compatible Spool
Add a review
$19.99
Mystic –
Great budget filament
This filament comes on a plastic spool it seems to be wound quite well the color is very consistent the diameter is consistent and the print quality is amazing it is an awesome budget filament and I look forward to ordering more in the future I am printing on a bamboo labs p1s
Jon Uchida –
Great color, great quality
This is the most beautiful color of ABS (the white ivory) I have yet found. It prints like a dream, keep the chamber at 55-60C, nozzle 260, and bed 100 and every print has come out nearly perfect.
Jeffrey Topp –
Good filament
I was pleased by the quality this filament provided, although I’m not the most keen on the shade of transparent blue. I wish they had a traditional medium blue transparent filament as I prefer ABS/ASA over PETG because PETG is very oozy and blobby when trying to print detailed parts. But at least they have a transparent blue because transparent ABS in general is not the easiest to find.
Chris –
Not AMS Compatible
Material is good, but NOT AMS COMPATIBLE, the spool is too small, so as it rotates it rotates as a different rate as the spool should which causes problems.
SailorMoon –
Recommend
Amazing color
LaDonna –
Excellent
Beautiful results
raph –
Prints well but dirty
NOT AMS COMPATIBLE. Yep they claim it is, but it’s not. The spool outside diameter is smaller than Bambu’s. When used in AMS the stack of filament is so full that it rubs against the AMS feeder which prevents the spool from reliably rolling back on filament changes. Had to design ring adapters, worked like a charm (design uploaded on github).Printed well on a P1S, but had to tune settings. Bambu ABS easily takes up to 1.04 flow (for super smooth and airless prints), but had to dial that down to 1.0 for YXPoler.Also, required outer / inner brim on thin part extensions on the bed (never needed that with any BL filament (out of 5), or they lift up after a while.But that done, it started to print very well. Great color, no idea why BL doesn’t carry any brown / beige.Lastly, there were flakes of what looked like other filaments which may have been run on the extruder machine before this spool. Bunch of white and black specks. Throughout the spool as the coil unwinded. Blew them off every now and then. Didn’t see much contamination in the printed parts but expected a much cleaner spool (never saw that in a BL spool, out of 40+).
CB –
Works perfectly, will buy again.
Very cost-effective filament. No issues in a bamboo P1S
Isaac –
This ABS printed excellently on my Bambulab P1S using the default Bambu ABS profile. I have used Bambulab ABS-GF (Glass fibre filled) and I’m missing this stuff already – a pity it DOES NOT fit in the AMS with the lid closed.I mounted it external spool, even after 1 year of sitting unsealed I just put it in a dryer and it came out great!
Christopher –
Delivery was next day. I don’t even know how it arrived so fast. Great product.
I am Stan –
I am reluctant to try filament from a different manufacturer than my printer, which is an Anycubic Kobra S1 Combo. The first spool that I bought that wasn’t the same brand as my printer, caused me to spend over three hours fixing and unclogging my printer – the filament broke in multiple places and clogged the hotend. I for some reason thought I should try it again, so I got this filament. After loading it into the AMS and telling my printer and my slicer about its colour and printing parameters, I was ready to print. I printed something that I designed that had a complex base, and this filament had no problem with the first layer at all. There was no lifting anywhere, which was a nice departure from some PETG filament I was running before. The entire print came out fantastic, and looks great. Although this print doesn’t really take advantage of the translucentness of the filament, you can still see it in the print. On the uprights in my print you can see the underlying printing structure which I think is pretty cool. The colour of the filament is a nice red. I will buy this brand of filament in the future. It is a solid filament that has caused me no issues and the prints are nice.
Vine Voice –
I’ve really enjoyed messing around with this filament. The translucent aspect is something that’s really interesting and something that I haven’t had any experience with in the past.It arrived neatly packaged with the winding and everything looking attractive and good. I didn’t have any issues with any clogging or lifting. I didn’t find that I had to mess around with the settings a lot which I always appreciate . I don’t have any major complaints.
Taurui –
Hier haben wir ein ABS+ Filament in “Marmor Graubeige”. Es ist also ein gräuliches sandfarben. Schwer zu beschreiben, aber ich hab ja Bilder angehängt :-)ABS ist ja top für mechanisch beanspruchte Gegenstände. Ich habe mir also einen Stiftehalter gedruckt (nagut, der ist jetzt nicht soooo kritisch, was Festigkeit angeht) aber auch ein Ersatzteil für meinen Drucker, und zwar den Halter für das Flachbandkabel.Ich habe mit 245°C Düse, 100°C Bett, 50mm/s und 2mm Schichtdicke gedruckt. Plus Brim. Davor ein Klebespray auf das PEI Sheet zur besseren Haftung.Mein Ender 3S1 ist zwar ein offener Drucker, aber ich habe mir ein “Zelt” gekauft um so eine Art geschlossenen Druckraum herstellen zu können, wenn auch nicht aktiv temperiert.Die Temperatur in dem Zelt war etwa bei 30°C, also auch nicht so ganz ideal.Aber: Hat gut funktioniert!Der Stiftehalter hat eine sehr hohe optische Qualität (Bild zeigt, wie das Ding aus dem Drucker kommt).Ja, die Layer sind sichtbar, stört mich aber nicht. Stringing ist minimal und nur bei sehr wenigen Stellen zu sehen. Es gibt keine Pickel oder sonstige Störungen. Die Flächen sind absolut gleichmäßig und sehen top aus.Aber: Der vordere Teil (Ablage unten) hat sich nach oben gewölbt. Warping ist also wirklich noch ein Problem hier, was aber vermutlich auch an meiner niedrigen Temperatur im Bauraum lag.Den Kabelhalter hatte ich mit Brim und Supports gedruckt, die sich sehr gut entfernen ließen.Beide Teile weisen eine große mechanische Festigkeit auf. Beide Teile haben etwas Flexibiität und eine hohe Anfassqualität.Zum Geruch: Da das mein erstes ABS-Filament ist, habe ich keinen Vergleich. Das Filament hatte beim Druck aber tatsächlich nur eine geringe Geruchsbelastung. Mir ist aber nicht klar, ob auch die gesundheitlich schädlichen Stoffe weniger sind, oder nur die “riechbaren”. Ich habe nach dem Druckvorgang mit einem Lüfter erstmal alle Luft rausgeschmissen, um sicher zu gehen.Insgesamt: Ich glaube, das ist ein gut druckbares ABS-Filament und ich bin mit der mechanischen und optischen Qualität sehr zufrieden. Das Warping ist noch vorhanden, aber das kann man ABS wohl schwer austreiben. Der Preis ist auch voll ok, also: Volle Punktzahl.