Digital Caliper, Sangabery 0-6 inches Caliper with Large LCD Screen, Auto – Off Feature, Inch and Millimeter Conversion Measuring Tool, Perfect for Household/DIY Measurment, etc

Good for low resolution measuring. Read the review for detailed test results.
Good value. I bought 2. They are consistent with each other and tested accurate at various ranges.Each one came with one battery already installed, and a pack of 2 spares.Comments:Strangely, the battery department requires a Phillips head screw driver. It is included. Be very careful not to lose these extremely tiny screws.Hint: Before using – always push the slide closed, take your finger off the slide, and then press the ZERO button to calibrate the readout.Hint: These are made from carbon fiber infused plastic. They are very sturdy, but they can flex. When measuring, do not use too much force or you can alter the reading.Hint: When the calibers are totally closed at 0.00, note the gap at the top of the measuring faces. They touch on the lower 3/4ths of the faces. When measuring, be sure to use the lower part. If you measure in the upper gap, you’ll be off by about .04″.**********Accuracy testing:There is nothing more in this review except for technical details of the accuracy tests. Don’t bother reading unless you are into this sort of thing.The accuracy tests had excellent results. The precision is supposed to be .01″. I found they were about 10 times that accurate at about .001. That’s as far as I can test with a readout that only goes to 2 decimal places.I used a set of Grade A2 precision gauge blocks to test. They are factory certified to be within 0.0002″. For the .01 resolution of these calibers, these gauge blocks are WAY overkill. But I have them sitting here, so …See the attached photos for measurement examples.Most of the measurements photographed were taken with the blocks left in the case, so the measurement shown in the case below them match the block used On a couple, I had to reposition. On these you can see the empty slot to the right under the caliber and read the measurement there. Sorry for the focus, I was hand-holding the phone. To make the numbers show, I was also hand-holding a flashlight. Most turned out OK, but at least one turned out pretty fuzzy.All measurements were done holding them properly with any multiple block wrung together. Only the photographed ones were done a bit sloppy. Luckily, at a resolution of .01, they could be sloppy and still be accurate. Very different from my normal measuring.To test for accuracy, test what a known item measures. Then, also test to see at what point a number rounds up. Then do these tests a various places along the slide.I tested 4″, 2″: 1″ and .05″. Then I tested to see where it rounds down/up..105 measured as .10″.106 measured as .11″So, the rounding happened at precisely halfway between .10 and ,11. Perfect. Way better than the specs. Within .001 for a stated resolution of .01. Very good.In another set of tests (not photographed), I took the 4,2, and1″ blocks and tested each with the addition of the .105, .106 blocks. They all rounded at the same place.

Functional digital caliper for occasional use
The Sangabery Digital Caliper is well-constructed using lightweight ABS plastic and features a digital measuring gauge that offers quick and accurate readouts. It supports both inch and millimeter units, allowing you to switch easily based on your measurement needs. With a measuring range of 0 to 6 inches (150mm), it’s suitable for small to medium-sized objects and offers decent precision for general-purpose tasks.While the ABS construction keeps the tool lightweight and affordable, it does make it feel somewhat fragile compared to metal alternatives. It’s perfectly suited for occasional or hobbyist use, but for frequent or heavy-duty applications, the all-metal version is a more durable choice.Overall, this is a budget-friendly and functional digital caliper that serves well for light-duty measurement needs.

Yay, I don’t have to share with the man anymore, I have my own!
Awesome price and it works just great. I don’t use one often, but when I want one I always have to go find the man and beg to borrow his and that comes with a lecture and he usually has to watch me use it. When I saw the price on this one I thought, why not get my own. I keep it in the box with my batteries and it is happy there. For a tool that has a delicate task to perform it is sturdy and the perfect size. The measurements I have taken with it are accurate. I quite like it.

Excellent for price
Yes, you kinda get what you pay for, but honestly its a great value for 10 bucks. Its accurate enough for entry level hobbyists.It has features that, while basic, are nice to see, such as manual calibration and mm/inch modes, both easy to use and access. I like the simplicity, everything does what it says immediately.It also comes with 2 extra batteries, which is convenient because theyre those stupid little hearing aid batteries nobody wants to buyIf you need more accurate, more durable high quality calipers, theyre not going to be at this price point. If you have that need, your tool budget should be way higher. I do hobbyist CAD/3D Modelling & 3D Printing, these are more than enough for me, even tho i may upgrade some day.As long as your expectations are in the right place, I can recommend these calipers

Good product with reasonable price but not that much accurate as I need to measure in MM for small particals Even didn’t got 2 extra batteries with product as mentioned

– 3 battery are included- Very precise (Tested on gauges feeler. It measured all the sizes correctly including 0.05mm))