Digital Caliper, Adoric 0-6″ Calipers Measuring Tool – Electronic Micrometer Caliper with Large LCD Screen, Auto-Off Feature, Inch and Millimeter Conversion

Good quality and great price
As I have gotten into 3d printing, I am starting to make my own designs. Part of this is to be able to take accurate measurements of whatever you are trying to solve. This caliper is good enough to measure what I need, and I expect that it will work for the long term. The display is easy to read and switching between measurement systems is in the press of a button.

Great for Guitar Work, But Keep Spare Batteries Handy
This digital caliper is great, and I use it all the time when I work on guitars (for checking fret height, nut spacing, etc.). The large, clear display is easy to read, and for general instrument work, the accuracy is more than enough.However, the one big issue with this caliper is that the battery does not last long at all. It seems to drain even when off. I’ve learned the hard way to always have spare CR2032 batteries on my bench, or you’ll be halfway through a setup when it dies.It’s a fantastic, affordable tool, but plan on budgeting for extra batteries. It’s worth the hassle for the price.

Must have tool for 3D printing!
Inexpensive and works like a charm. Durable for what I use it for, 3D printing. This is a game changer as bambu labs prints scaled with mm. I can get a more precise measurement of the object I’m going to scale versus the ruler/measure tape. This has simplified the printing process with it’s quick and easy to read display! Is this used for major woodworking/construction? No, opt for the stainless version for that.Comes with an extra battery as well, which is nice considering the price of batteries now a days.

User interface design flaw caused me to return it
Pros:• Has a large display (larger than most digital calipers)• Can display Fractions (along with mm & decimal inches options)• Units are displayed to the right of the number• Slides well, has a micro adjust wheel, and a lockdown pin on top• Uses commonly available CR2032 cellCons:• Poor user interface (Zero and Power share a button)• Somewhat heavy• Too easy to accidentally zero out the caliper, resulting in wasted timeI’ve had a plastic, Swiss made, General brand, dial analog caliper i’ve used to decades. It gets a lot of use, i treat it well, and it has held up well. I use it all the time to determine what size drill bit to use.I decided it was time to get a fractional digital caliper, to streamline my measurements. I have a non-fractional Harbor Freight digital caliper i rarely use, because it uses button cells (which i never seem to have on hand). I wanted a caliper which uses a CR2032 coin cell, and does fractions.I bought this caliper for use at a secondary location, and a more expensive Kynup (at nearly twice the price), to use as my primary. Ultimately, i decided to return this one because of its two-button user interface.The power button does double duty as a Zero button. Unfortunately, a short press on it zeros the device, whereas a long-press is required to power it off. If it were the other way around, i likely would have kept it.Since zeroing is something seldom needed/used by most people, and powering off will be needed by virtually everyone, a long-press should be required to zero.It may seem like a small thing, but it is far too easy to accidentally zero it when you don’t want to (in part because of the position of the button on the device), which then requires closing the caliper, zeroing once again, then retaking your measurement. And it is incredibly annoying to have to do a long press simply to turn it off. This is especially problematic if you have other calipers with a proper user interface, as you have to remember that this is the one works differently.Engineers should be required to use devices they design. At the very least, the design team should consult actual users. (Think: Deming Quality Circles.)My Kynup has a dedicated Zero button (placed at the top, where it’s unlikely to be hit accidentally), and the power button powers it off immediately. Proper design; what a joy! And because of its power button placement, i’ve never turned it off accidentally, but should i, it’s a simple matter to turn it back on, and be immediately back in business. Definitely a keeper. Also, i like its display better. The fractions are bolder, and its use of smaller numerals for less significant digits actually improves readability over this caliper. However, unlike this unit, the units are displayed on the left side of the numbers; a design flaw, but minor enough i can live with it.Bottom line: This caliper has some nice features and will get the job done. If it’s your only caliper, and you don’t use it very often, it may be adequate for your needs. However the Kynup is much more of a joy to use, so was worth twice the price to me. Sometimes the little things really make or break a product.I still want a second, inexpensive caliper, so have the graphite-composite WEN 10761 on order to replace this caliper. It has a dedicated zero button, so am hoping it powers off immediately when the power button is pressed, like the Kynup. And being plastic, i’m hoping the weight will be more to my liking (i.e. similar to my plastic analog caliper). I expect its display isn’t as large, but i can live with that.The photos below show this caliper, and the Kynup below it, for comparison. The two weigh approximately the same, thus both are heavier than i like. The maroon tinge on the display is an artifact of the camera and natural sunlight. Both display backgrounds, in real life, look like the Kynup’s in these photos.

Impressed with the Adoric 0-6″ Digital Caliper! It’s accurate, easy to use, and ready right out of the box. The digital display is clear, and switching between units is simple. Feels solid, gives consistent results, and the auto-off saves battery. Great for DIY or precise work—excellent value!

Calibro che uso principalmente per la misurazione dei rasoi a mano libera. E’ abbastanza preciso e mantiene la misura, le punte in plastica sono ottimali nel mio caso perché non rischio di danneggiare particolarmente l’apice o rigare i rasoi se faccio qualche errore. La batteria è inclisa e a questo prezzo penso sia un ottimo acquisto che mi sento di consigliare a tutti quelli che necessitano un calibro di questo tipo.

Good but super cheap quality.At least it seems to work ok.