Creality Hyper ABS Filament for K1/K1 Max/K2/K2 Plus-Christmas Gifts, Official 3D Printer Filament 1.75mm for High-Speed Printing Convenient Open Printing ABS Filament, 1kg(2.2lbs) Spool (Black)
$21.99
Related Products
Product description
【Five Times Faster, More Efficient】By increasing the fluidity of common ABS materials, Hyper ABS makes 3D printing faster and more efficient. Thanks to the fast cooling formula, Hyper Series ABS supports up to 300mm/s print speed with Creality K1/K1 Max/K1C
【Convenient Open Printing】No need warm enclosure and filament dryer box, printing perfect and high precision models which make 3D printing much easier
【High Impact Resistance】Hyper ABS has an impact strength of 19kJ/m², nearly double compared to PLA’s 10kJ/m². Its printed models are stronger than PLA’s and can be better used for printing parts in stressful environments
【Less Cracking & Warping】Hyper ABS can release stress well during the printing process, thus reducing the shrinkage rate of ABS. No need to close the cavity for printing, it can be successfully printed and effectively avoiding cracking and warping
【Cardboard Spool & Box】Creality Hyper ABS Filament using a fully recyclable cardboard spool and box allows allows convenience for sorting and recycling after the filament is exhausted
13 reviews for Creality Hyper ABS Filament for K1/K1 Max/K2/K2 Plus-Christmas Gifts, Official 3D Printer Filament 1.75mm for High-Speed Printing Convenient Open Printing ABS Filament, 1kg(2.2lbs) Spool (Black)
Add a review
$21.99
Mikie –
Solid unit
Easy to setup. Works great. The only negative I would give this is the touchscreen is a little finicky.
Joseph and Kaci T. –
Good dryer
Easy to use, works as expected, would recommend.
Harrison Brown –
Great option for PETG/PC
Game changer for printing sensitive filaments. Unless I’m printing something like PLA that’s already dry, I run filament directly out of this into the printer. Having two slots allows me to actively print one filament, and dry another roll at the same time. I like the preset options for PLA, PETG, PC, etc. but always read from the manufacturer what the recommended drying temps are, especially for PLA.A couple nit-picks, the touch screen could be more responsive, or be physical buttons ideally. The roller bearing shafts are kind of small too, so you may want to print little ‘spacer’ cylinders for the spools to roll on; that’s made a big difference. There is some noise, but it’s a large hot fan so that’s to be expected. It’s actually fairly quiet for what you get.All in all it’s a good item for the price, and doesn’t feel super cheap.
Robin S –
Works well, fancy UI
I like this product, it’s easy to use, the PTFE tube coming out was a bit confusing for me because it had a plastic bit on it that I didn’t know what went to. Either way, the touchscreen interface on the device is fancy, and the humidity of the box does seem to drop a decent amount. The only problem I have is that the box isn’t airtight, which makes sense as a heater, but this worries me a bit since there’s no remote control or some way to resume drying if you’re like me and leave filament on the printer constantly.
Brad –
Easy to use and definitely makes a difference
I did a lot of research on filament driers and this Creality Space Pi came out on top. I can see why. It is easy to use and definitely has made a difference in the print quality coming from my printer. I don’t print all that often, so when I would go to do a print, my filament would be brittle and tended to print “ok” but not great. I did a test print where I grabbed an old roll and printed a model, then dried it in the Creality Space Pi and there was a significant and obvious difference. It was like I was printing with a brand new roll of filament.It does take some getting used to the touch screen as I feel there is a bit of a delay after touching it and the response of the screen, but I find the touch screen easy to use and see. The fan noise is noticeable, but not loud. Just a slight hum in the background. I like the fact that the air is blown around the inside of the unit instead of just a heating element that just warms the unit.If you are on the fence on getting a filament drier, get this one. You won’t be disappointed.
Brad J DuChene –
Excellent filament
Worked flawlessly. Very good filament!
Michael Gerstweiler –
Easy to use
Great machine to dry my filament. Now it prints so much better. Easy to use and setup.
Toyz –
UPDATE (Originally was “DO NOT BUY: FAN FAILED at 40 days”)
— READ UPDATE AT BOTTOM –Seemed good, nice design, worked fine … but at 40 days it shut itself off with the fan making a HORRIBLE sound – sounds like the fan bearings have failed. At 40 days?? on a $90 device? Come on Creality, you can put something better than a $1 sleeve bearing fan for the ONE moving wear item!!Get something else – sadly Creality doesn’t seem to care about quality.–UPDATE–A bit of a mixed update: Creality reached out to me, and asked me to send a video of the device making the noise – so I did. Then silence. Several weeks later, I got a notice of something being shipped to me, but not who it was from, what it was, just a tracking number. A couple of weeks later a squirrel cage fan showed up in a clear plastic bag. No name, no documentation, etc. I had no idea what was in the dryer, so I set it aside.Later, I emailed Creality support, and they replied “we sent a replacement fan to you already”. This was the first indication of what that mystery shipment was (and yes, I searched my gmail to be sure). They also sent a very brief document on how to do the replacement.Sadly, the instructions were for a different model, and had me remove several things which I didn’t need to, and screws were in different places. Once I got to the fans, it turns out they sent me the wrong fan – it was too big.To their credit, they did refund me. And the fans they used are brushless, which last much longer than brushed. Unfortunately, either the bearings weren’t of good quality, or I got a defective one.
Maki –
Filament kullanımı açısından diğer filamentlerden daha kolay. Ben 220-235 dereceler arasında kullanıyorum. Açık bir yazıcıya sahip olduğum için doğal olarak bu dereceler arasında yaz-kış dereceler değişebiliyor. Filament performans açısından yazıcıda hataya (program veya gcode hataları hariç) veya nozüle bir zarar vermedi. Bu filamentli alıp “Tam saydama yakın ve dekoratif modeller basmak istiyorum.” diyenler, yazıcı ayarlarında duvar sayısını en azda (1) tutmaya çalışın ve iç dolgu yüzdesini %5 olarak ayarlayın. Tabi iç dolgunun modeli de etki edecektir fakat benden bu kadar ;D
Eugenio A –
Le stampe sono uscite precise e pulite, senza problemi di sovraestrusione o sottoestrusione. Il materiale si è comportato in modo costante, garantendo una buona adesione al piatto e una finitura liscia.L’unico aspetto che non ho ancora perfezionato è la completa trasparenza: nonostante vari tentativi di regolazione, non sono riuscito a trovare un profilo di stampa che renda il pezzo completamente cristallino. La traslucenza è comunque soddisfacente
Cliente Amazon –
Imprimo por lo general con petg y es un azul transparente impresionante.
richard robichaud –
This is great I like it because it’s a stronger bowmen tube. The tube cutter is a must because it cuts clean and ti fits perfectly.
Zack –
Works exactly as expected and dries filament well. It’s quiet and doesn’t kick off much heat itself. Most importantly, I trust a brand like Creality when it comes to running unattended heaters for 8 hours not to burn my house down. It’s a bit more expensive but the peace of mind and quality is worth a few extra dollars.The only downside is that the screen doesn’t feel high quality. It might just be that way to withstand heat and consume less power because it looks like a low power touch screen calculator style display. It works fine to press a couple settings and then forget about it, just press slowly and hard and it’ll register your inputs fine.