ABS Filament 1.75mm, ABS 1kg Spool (2.2lbs),3D Printer Filament,Dimensional Accuracy +/- 0.03 mm, Fit Most FDM Printer-Grey
$18.99
Related Products
Product description
Excellent engineering Filament: 3DHoJor ABS filament durable and sturdy, high impact resistance.Suitable for printing drone mounts, industrial parts, etc. Excellent physical performance, no layer separation or warping, suitable for printing large size objects with edges and corners.
Heat Resistant& UV-resistant: After testing 3DHoJor ABS filament withstand temperatures up to 80°C while maintaining UV stability and waterproof properties. Perfect for outdoor installations such as solar lamp housings, folding furniture, and garden accessories.
Easy to Use: More humanized design. The upgraded carboard spool has a hard edge design prevents deformation. The spool has viewing window so that you can easily figure out the remaining filaments. Friendly to beginners, no need to worry about purity, tolerance and other issues.
Dimensional Accuracy & Consistency: Dimensional Accuracy +/- 0.03mm. Due to the small diameter error, 3DHoJor PLA filament suitable for almost all 1.75mm FDM 3D printers. Enjoy consistent layer adhesion and crisp, accurate prints.
Vacuumed Sealed Packaging: Comes in a sealed vacuum bag with a desiccant bag to keep it dry and prevent from dust and foreign particles, no bubble and easy to print.
13 reviews for ABS Filament 1.75mm, ABS 1kg Spool (2.2lbs),3D Printer Filament,Dimensional Accuracy +/- 0.03 mm, Fit Most FDM Printer-Grey
Add a review
$18.99
Price –
ABS filament
I had forgot to change my settings so my first print was bad. “All my fault”. After changing the settings, a brief 30 seconds, worked perfect. Just telling you this if your trying ABS for the first time to be sure to change settings but would recommend this product
Kmwatts –
Great filament!
Printed perfectly, remember to store this in a dry bag or box to keep it printing at its best.
Amazon Customer –
Great results
3DHojor filament is my go to PLA. I gave the ABS a try as the price went low during the holiday. I was extremely excited to see the resulting prints. It printed well in my P1S, and after some calibrations and settings.
yaniv –
Good filament
Good adhesive no warping good filament
Steven p. –
Great product
The quality of the filament is outstanding it adheres to the bed with no issues and the print came out perfect. Great color and great price.
Reviewer of things –
Good TPU, will buy again
Had to increase the temperature from a stock profile, but printed decent right out of the box without proper calibration. Great layer adhesion and nice shiny look. Probably should dry it, but I wanted/needed black for a last minute fix. Will continue to use, and purchase in the future. Note that there is some roughness in the print that id attribute to moisture, but does not affect its functionality.
TobyK –
Works very well on a MK4S, almost no extruder jams, pretty clear results!
I’ve been running this on a Prusa MK4S and I got it dialed in pretty quick. I started w/the PrusaSlicer “Flex” filament defaut, dropped the nozzle temp to 127, backed off the extruder tension 2-1/2 turns on both screws from “standard”.Fan/cooling wise I set it to just 0 to 10%. Extrusion Multiplier needs to be in the 1.08 to 1.1 range. It prints out pretty clear there. Higher temps (130+ on my printer) or faster/higher fan clouds the print. My only issue is that the Amazon listing says it’s “Natural” and the spool says “Clear” (which is it?). Those are not the same in the world of 3D printing. I always print flex on a COLD bed w/blue tape, and this stuff loves it as well. Dimensionally consistent, very good wind. My spool measured 1.75 at many/most points, which is really, really good for a flex. This 95A hardness TPU filament will be added to my “always in-stock” inventory if it stays around this $20 price point.
Nick –
Decent
Never used TPU before but it seems decent. A little hard to load, but that could be user error.
ダンジョン飯好き –
いわゆるＡＢＳのフィラメントですね。普通に使えましたし、特に問題なるようなムラとか、巻の強さ、クセもなく、動作しました。基本的に安心できる品質レベルにあるので、あとは納期と値段に納得がいけば、注文できます．段ボール系のパッケージで届きました。形成された品物に対しても満足です。
いとおかし –
最低温度たと糸が出たのでプラス20℃で行きましたが印刷は良好です。安価でよいが紙製のスプールなので私の環境では巻き直しが必要でした。
クロエ –
ベッドの推奨温度が９５℃以上だったけれどbambu lab a1 mini は８０℃までの仕様だったので色々設定を変えてみたけれど反りが出てしまったこのフィラメント自体は途中までだったけれどきれいな巻きで引っかかることもなくプリントもむらが無くて良かった。
adsc –
BambuLab P1S(AMS)でリモコンホルダーをプリントしてみました。強度はPLAと比べると強く、触ると硬さを実感できます。発色も層の仕上がりも綺麗で、糸引きも少なかったです。プリント直後にプレートから剥がしたところ、ABSは熱収縮が大きいため若干の変形はありましたが、問題ありませんでした。臭いはそこまで気になりませんでしたが、換気はした方が良さそうです。仕上がりがかなり硬いので、サポート材のバリを爪で処理するのが難しかったです。デザインカッターを使うと角のバリを綺麗に取り除くことができました。刃が食い込無こともなかったので簡単でした。設定はBambu StudioのプリセットのGeneric ABSで行いましたが、問題ありませんでした。PLAと比べると扱いが難しいですが、強度が高いので長く使いそうなアクセサリにおすすめできます。
Amazon カスタマー –
3Dプリント初心者です。まだまだ失敗も多いので、コストは押さえつつ数は試したいというレベル感の私ですが、問題なく＆量も十分使えました！