ANYCUBIC Wash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and IPA Saving, for Anycubic Photon Mono M5 Saturn LCD/SLA/DLP 3D Printer
$149.99
Related Products
Product description
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. wash and cure 3 plus Merchant Video
1 Larger Washing Size
2 Larger Curing Size
Powerful Curing Light Source 
Enhanced localized curing
Flexicure gooseneck lights design increases the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the curing effect on details such as the top of the model and the figure’s skirt.
Overall Curing
Wash and Cure 3 Plus offers a 20% improvement in curing uniformity than the previous generation. This results in a more thorough and comprehensive overall curing of the model, ensuring better quality and consistency.
1 Dual-layer Washing
2 Double-layer Curing
1 Two Cleaning Modes
2 Rustproof and Durable
1 Simple Operation
2 Quiet and Efficient
Anycubic Products
Add to Cart
Customer Reviews
4.6 out of 5 stars 3,230
4.2 out of 5 stars 1,693
4.2 out of 5 stars 1,693
4.2 out of 5 stars 1,693
4.4 out of 5 stars 350
4.6 out of 5 stars 89
Price
$149.99$149.99
$669.99$669.99
$349.99$349.99
$699.99$699.99
$179.99$179.99
$259.99$259.99
Max Cure Size
8.66”x10.23”
—
—
—
—
—
Max Wash Size
8.97”x5.03”x10.23”
—
—
—
—
—
LCD Type
—
10.1‘’ Mono LCD
10.1” Mono LCD
13.6‘’ Mono LCD
7” Mono LCD
7” Mono LCD
Build Area
—
8.77”x4.96”x9.05
8.77”x4.96”x9.05”
11.8” x 6.5” x 11.7”
6.04”x3.42”x6.49”
6.04”x3.42”x6.49”
XY Resolution
—
13312*5120（14K)
13312 x 5120(14K)
6480 x 3600(7K)
9024×5120(10K)
9024×5120(10K)
Z Axis Accuracy
—
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Max Printing Speed
—
170mm/h or 130mm/h
150mm/h or 90mm/h
60mm/h
70mm/h
120mm/h or 70mm/h
【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97”x5.03”x10.23”. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Photon Mono M7 Pro, Saturn 3/4 series or other 10.6 inches and below.
【Flexicure Gooseneck Light】Due to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
【Better Curing Effect】The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
【Efficient IPA utilization】The dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
【Dual-layer Curing】A specially designed double-layer curing platform increases the number of models cured per cycle and markedly improves curing efficiency.
8 reviews for ANYCUBIC Wash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Lights, Dual-Layer Design and IPA Saving, for Anycubic Photon Mono M5 Saturn LCD/SLA/DLP 3D Printer
Add a review
$149.99
Noah J –
Good Product.
Over all, this is a very good product. However, to cut to the chase, I prefer using an ultrasonic cleaner and a homemade UV curing chamber.Here are a few of the pros, cons, and reasons to back up my preferences.Pros:Simplicity (Two machines in one)Pretty good at washing parts (reason for “Pretty good” explained later)Amazing at curing parts (the UV LEDs are super powerful)Attention to safety (the lid is UV blocking and there is a safety switch that shuts down the machine if the lid is removed)Simple user interfaceWorks with a pretty small amount of cleaning fluid (there is an included bracket that lowers the bed to the surface of the liquid)Cons:Price (see below for further detail)Can’t use both the cleaning and curing features simultaneouslyIn all, this is a very useful piece of equipment. However, let’s go into further detail on a couple of the points made above. Let’s start with my comment that it does a “Pretty good” job at cleaning. Though the cleaning system does a surprisingly decent job at removing excess resin from the surface of the prints, it lacks the penetrating capability of an ultrasonic cleaner. With an ultrasonic cleaner, the part gets cleaned inside and out. This is important because resin printers can’t really print infill. This means that either you print with 100% infill (i.e. solid) or no infill (i.e. hollow). Because the ultrasonic cleaner uses, well, ultrasonic waves to clean, these waves can penetrate the walls of the print and clean the inside as well.And finally, let’s talk price. Though this machine is pretty good at what it does, I don’t think it is worth the $150 price tag (as is the price at the time of the writing of this review). I say this because of the all the other methods of doing the things this machine does (sometimes even better) but at a cheaper price. For example, I can get an ultrasonic cleaner (big enough to put the entire build plate into) for around $80 and a string of UV LEDs for $10. So, with a little DIY (to build the curing chamber) I can have equivalent capability for $60 less.In conclusion, this is an all around good machine. I believe that you can make something better, but, since this is the only all-in-one cure/wash station I can find, I would recommend it to anybody that doesn’t want to mess with the DIY side.
Kevin Waterman –
Way more useful than anticipated
I expected this device to be a positive improvement for my 3d printing, but I hadn’t anticipated the kind of difference it would make.Like most people I saw this device, thought “Eh, kind of interesting, but it just does things I already have a set up for.” Eventually though I was convinced to take a chance on it (being stuck at home for the coronavirus social distancing/quarantining certainly helped since I was doing more printing as a result). I was quite surprised.First, it was a big space saver. My old set up was a tupperware of IPA for initial wash, an ultrasonic cleaner for a second rinsing, and then a 5 gallon bucket lined with UV leds with a solar powered rotating display stand. This device replaced all of that and it left me with a lot of space. That extra space has also helped me keep the work area cleaner.Second, it’s really convenient. The alternate means of immersing the prints, the wide platform for curing, and plenty of other little things show that this is a device that some thought went into. It’s well designed and it does its jobs well. It’s hard to point to a single thing, but it definitely makes what is often the most tedious parts of resin printing faster and more enjoyable.The only thing I would put as a warning – the manual doesn’t say this (at least not anywhere I saw), but none of the functions work without the protective cover on. This makes sense for the cure mode, but was very confusing when I was attempting to clean some prints the first time. I nearly thought the machine was broken until I tried putting the cover on to see if that made a difference (after at least 15 minutes of trying it in every other possible configuration and with multiple different outlets).If you can spare the funds and are thinking about this device, I strongly recommend making the purchase.
Kody D. Belshe –
A Great Investment For Anyone Who Is Into Resin Printing
I have been resin printing for about a year and a half. In that time, I have tried my fair share of DIY washing and curing setups. From multiple jars of IPA to UV Lights glued onto containers, or just leaving prints outside in the sun, I’ve tried it all.I recently learned of Anycubic’s Wash and Cure station and decided to give it a try. This machine has definitely streamlined my post-processing.The machine comes with a large container to hold your IPA or other cleaning liquid, and there is an agitator blade in the bottom which is controlled by magnets to ensure a secure, leak-proof containment.You can choose 2, 4 or 6 minute intervals, and half way through the cycle, the agitator blade reverses ensuring flowing cleaner will wash your parts from both directions.The machine comes with 3 ways to submerge your parts. The first is a metal basket which you can put the parts in if you’ve already removed them from the build plate. There are also a fixed and adjustable build plate holder. This allows you to submerge the build plate so it gets cleaned at the same time as the printed part. The build plate holders are designed to fit most resin printer models, though I had to modify the diameter of the metal connector slightly to get it to hold my Elegoo Mars build plate securely.When it’s time to post-cure your parts, there is a clear curing platform that you port into the middle of the machine. After placing the piece on the platform and placing the lid over the machine, you can set it to curing mode and, like the washing mode, choose 2, 4 or 6 minute cure time. Once started, an array of UV lights is activated while the curing platform rotates 360 degrees.This machine makes the post-printing process so much cleaner and easier. No more swirling printed parts around in a jar of IPA with tongs. No more cleaning the build plate or having to use a homemade UV curing box. I would highly recommend this machine for anyone who is into resin printing.
Jeff –
A perfect companion to my resin printer
matthew –
Great price and gets the job done.
Chamoy –
Es muy buen producto, es lo espera.
Alberto –
La lavadora viene con todo lo esencial para trabajar, excepto el alcohol, funciona de maravilla. Llego rápido y bien empacado, todo venía sin un rasguño.
sean –
Good little machine though when washing prints you can get wee bits of resin or cured resin that get stuck in the impeller, you will hear a clunk sound but luckily the machine kicks it back out and keeps going.The curing part is fine.