Table Saw Gauge Dia Indicator for Table Saw and Band Saw,0.01mm Accuracy Calibration Tool,Table Saw Jig Guide Fits for 3/4″ T Slot U Slot,Table Saw Accessories for Woodworking,Machinery
$39.99
Related Products
GOINGMAKE table saw gauge dia indicator is a must have table saw accessories for woodworking, diy and machinery. It is easy to use and the accuracy is up to 0.01mm. The sliding bar includes 2 adjust ring to make sure no slop between slider and table saw slot. It is easy to adjust the alignment between the balde and miter slot of your table saw. Also easy to adjust your rip fence to be parallel to the miter slot. GOINGMAKE table saw gauge make your table saw and woodworking easier and more accurate.
【Precision Calibration】GOINGMAKE table saw gauge provides 0.01mm accuracy dial indicator. It is precision to use and easy to align between the table saw blade and miter slot. Also easy to adjust your rip fence to be parallel to the miter slot. And you can sliding the table saw gauge stable with the extra support base. There are 2 adjust ring in the miter bar ensure no slop and zero fit the miter slot.
【Easy to Setup】GOINGMAKE table saw gauge dial indicator is easy to setup. Including the adjustable miter bar ensure you can easily to use and make no slop and zero fit table saw slot. Just slide into the table saw miter slot and ajdust two rings until no slop. Make the dial indicator touch the table saw blade or rip fence. And you can slide the table saw gauge and check the dia indicator and adjust your table saw blade right.
【Fits for Most Table Saw】GOINGMAKE dial indicator table saw gauge fits for most table saw, band saw and router table. Fits for 3/4 inch wide table saw slot.
【Versatilty】GOINGMAKE table saw gauge provides a wide adjustable range from 4 inch to 8.85 inch. You can easily adjust the length to fit your different need on woodworking, machinery and DIY.
【More Safe to Use Table Saw】GOINGMAKE table saw guide can eliminate blade wobble, easy to adjust the alignment between the blade and your table saw so it can improve your accuracy and protecting your blades and workpiece from damage. Make you safer to use table saw.
8 reviews for Table Saw Gauge Dia Indicator for Table Saw and Band Saw,0.01mm Accuracy Calibration Tool,Table Saw Jig Guide Fits for 3/4″ T Slot U Slot,Table Saw Accessories for Woodworking,Machinery
Add a review
$39.99
LF –
Precision Calibration Tool for Accurate Saw Alignment
The GOINGMAKE Table Saw Gauge Dial Indicator is an excellent tool for any woodworker who takes precision seriously. With 0.01mm accuracy, this gauge makes it easy to calibrate your table saw or band saw to exacting tolerances, helping eliminate misalignment that can cause poor cuts or safety issues.The build quality is solid, and the dial indicator moves smoothly and consistently, giving you confidence in its readings. It fits perfectly into a standard 3/4″ miter slot (T-slot or U-slot), which means it’s compatible with most table saws and many band saws right out of the box.Whether you’re aligning your blade, fence, or miter gauge, this tool makes the process much faster and more reliable than using traditional measuring methods. The jig slides easily but securely, allowing for consistent contact and repeatable measurements across the work surface.Overall, this is a must-have accessory for serious woodworking, especially if you want to dial in your machines for the most accurate results. It’s affordable, well-made, and delivers professional-level performance.
Sarah Younts –
Accurate Table Saw Gauge for DIY Projects—Small Learning Curve
As a weekend woodworker, I picked up this table saw gauge indicator to help improve my cuts—especially for getting blade and fence alignment just right. I’ve been impressed with the level of precision it adds to my setup. Once calibrated, it’s made a noticeable difference in reducing slight kickback and improving cut consistency, especially on long rips.The digital readout is clear and accurate, and the build quality feels solid for the price. The gauge fits well in the miter slot of my saw, and I appreciate the tight tolerances—no wiggle or slop.One thing to note: there’s a bit of a learning curve if you haven’t used a setup gauge like this before. The instructions are minimal, so you might want to watch a YouTube video or two for proper calibration. Also, I wish it came with a storage case or pouch—this feels like a precision tool, and I don’t want it just rolling around in my drawer.If you’re trying to take your saw setup to the next level—whether you’re building furniture, cabinets, or just want cleaner cuts—this gauge indicator is a smart, affordable upgrade. Great for hobbyists or semi-pros who care about precision.
jevers –
Best tool you can own for your table saw!
I love this tool! I didn’t realize how much my table saw fence was off until I used this dial indicator to check it! It seems to be well built and very very accurate. assembly took less than a minute till it was ready to use. I wish I had bought it years ago as it would have relieved a LOT of frustration!
John –
Excellent design and build quality!
Didn’t realize it was in mm until after purchase, but that’s on me. The design and build quality are excellent! Much better than expected. Fits snuggly in the miter slot once adjusted. The only change in the design I’d like to see is for the indicator to be able to fold under so the plunger would point inward for storage. Will file the corners so am able to do this. Be nice if a thin rip head was offered for the base holder so I wouldn’t have to purchase that entire unit separately.
Amazon Customer –
Very precise well made
Works great!! Very precise.
mcmc –
Works fine, could be better.
Works fine. It’s pretty intuitive to set up and use. It seems like a good investment to get the most out of your tools. I’m testing it on a beat up contractor saw, but even then I could likely find some improvement to be had. It’s all metal pretty much except for the dial indicator itself. It’s made very well. It fits the saw channel just fine, and there’s tons of bearing surface for when you are going “free” to check along the length of either the blade or fence. The only thing I really don’t like is that you need a tool to actually secure it if you want to lock it down in the channel. On the plus side, they do include extra expansion washers if you wear out or break the ones installed. As for accuracy, this type of tool is all about comparison and not specific measurements, and for that it seems to work just fine.
Stuart –
Accuracy
This is a great tool for truing up the miter fence and the saw blade.
Bob R. –
Well, worth the money!
Any tool you can buy that allows you to make cleaner straighter cuts, and can actually add safety to your tool is worth having. It’s a small price to pay when you consider how much you can end up spending on lumber not to mention time because of bad cuts, I highly recommend it!