PROXXON MICRO Mill MF 70, 37110

Add your review

$522.90

Tags: , ,

$522.90


Note: Prices may fluctuate as sellers adjust them regularly. You'll see the latest price at final checkout.
Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare



The unit is supplied with a stable base of cast iron. Both vertical column and compound table are of treated, high quality aluminum. All axes are play-free and have adjustable slides. The headstock, made of die-cast aluminum, houses the 24 pole balanced special motor and provides stability even at high operating speeds. This stability facilitates the use of the finest cutters. Six triple slit, hardened MICROMOT steel collets come with the machine and cover shank sizes of 1/32″, 1/16″, 5/64″, 3/32″, 7/64″ and 1/8″ (1.0, 1.5, 2.0, 2.35, 3.0, 3.2mm). The table is fitted with three T-slots of the 15/32″ x 15/64″ x 13/64″ (12 x 6 x 5mm) MICROMOT-norm. An adjustable ruler scale eases the positioning of the work piece. All hand wheels are zero adjustable with 1 revolution = 1/32″ (1.0mm), 1 division = .002″ (0.05mm). Technical data: Speed 5,000 – 20,000rpm. Table Size 7 7/8″ x 2 3/4″ (200 x 70mm). X-Y Travel 5 17/64″ and 1 13/16″ (134 and 46mm). Vertical Travel 2 3/4″ (70mm). Footprint Size 5 7/64″ x 8 55/64″ (130 x 225mm). Height 13 25/64″ (340mm). Max. Power 1/8hp (100W). Volts 110 – 120V AC, 60Hz. Weight 15.5 lb (7kg).
Small and beautiful – the accurate mill for lab, optician, jewelry, electronic and model building projects
Supplied with a stable base of cast iron, vertical column and compound table are of treated, high quality aluminum
All axes are play-free and have adjustable slides, headstock, made of die-cast aluminum
Balanced special motor and provides stability even at high operating speeds
Scope of delivery: 1x PROXXON MICRO Mill MF 70 including MICROMOT steel collet set and stepped clamp blocks of steel. Part number: 37110

13 reviews for PROXXON MICRO Mill MF 70, 37110

0.0 out of 5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Brian Sondergeld –

    Professional quality, great value.
    Great Mini Mill. You aren’t going to machine an engine block with this, there is very limited height adjustment. But this machine is sturdy, stable and reliable. I’ve used it to machine stainless steel, brass and Delrin so far, in our prototyping lab. It’s a great value.Picture below is a concept controller I made using this. I machined the cord grip hole and radius in the 1/8″ stainless bar with this bar, and hollowed out the Delrin rod for the switches and electronics.

    Helpful(0) Unhelpful(0)You have already voted this
  2. Kerry Doyle –

    Good value for entry level machine
    This is a fine entry level machine, a good value, designed for light work. It met those expectations and has fulfilled my needs mostly. It reliably chews out material but at a slow pace because it is a small machine. It is made in Europe, not Asia, which is a big plus to me.One might expect high precision in a small machine but that is a bit unrealistic given the price point. My only criticism of the function is the play in the table is a bit excessive, but that likely could be adjusted. It doesn’t appear to be slop in the manufacturing; I have just been too lazy to attempt to tighten the table and haven’t needed that precision for the work I have done to this point.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Philip from the Great Pacific NorthWET –

    More Proxxon Tools for this MICRO MACHINIST.
    From Cutting the box open, to milling my first cut All inside One Hour.that would have been CUT in Half, if MORE INSTRUCTIONS were provided in the “Instruction Manual” !!!What would I change in Instructions? Only add that to Assemble the XY Table to the base, Crank the Y AXIS All the way IN (TO the Column) or OUT (AWAY from the Column) to insert the 4 cap head screws !!!Yes, that ~is~ a minor thing, but I had not drank my morning Coffee !!!My First Milling was upon a piece of Ba!tic Birch Plywood, which will be a “sacrificial surface” for other milling jobs. It was installed over the center t-slot only, as it was just scrap plywood. I have a dust prevention plywood custom fitting to the left & right of my Proxxon Precision Vise which arrived three days before the mill :-)I am pairing the Mill with a Proxxon 150 Lathe, arriving “soon”.All told I now own 6 Proxxon tools, including their engraving equipment.Great Tools, Great Designs, just needs a ~bit more~ Instructions in my opinion.⁷

    Helpful(0) Unhelpful(0)You have already voted this
  4. Lew –

    Small but excellent Micro Milling machine.
    I read the reviews prior to purchase. Accurate and durability were excellent in the reviews and also number one with me. One should also purchase the drill chuck as precise holes are important when working on small hobby parts.

    Helpful(0) Unhelpful(0)You have already voted this
  5. Andre Beaudoin –

    Proxxon
    Very nice

    Helpful(0) Unhelpful(0)You have already voted this
  6. Scott Ringgold –

    It’s really small
    Unfortunately for my needs this was just way too small. I wanted to be able to use it, the price was so good. But it’s really tiny.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Russ S. –

    A beautiful little machine – mostly
    If you buy one of these looking for an advanced Dremel you will be very happy. If you’re looking for a mini Bridgeport, you may be a bit disappointed.The Proxxon MF-70 combines the utility of a Dremel with the precision of a mill. With it you’ll be able to perform many operations that would be difficult or impossible holding the Dremel in your hand. Before I decided on the MF-70, I considered cobbling together a mill from a Dremel 220-01 stand and a HF X-Y vise but the Dremel stand is crap and HF X-Y vises seemed expensive and crude. I also considered getting a Vanda-Lay ACRA rig, but when you add in the cost of the adjustable X and Z axes it approaches the cost of the MF-70, and you have to add your own Dremel. In my case the MF-70 was not the cheapest option but so far it’s been fun to have in the shop, and it has a lot of support if you want to go CNC. BTW I recommend picking up the 24260 precision vise, it complements the mill nicely.On the downside, the most disappointing aspect of the MF70 is that when cranking the X axis, the table deflects +/- 0.010″. That’s 20 thousandths total error. Using a twisting grip on the wheel rather than cranking the handle helps reduce this to a few thousandths. Tightening the gibs helps, however the motion then becomes “grabby.” The Z axis scale ring hangs up sometimes which throws it off zero and causes errors. I also wish the head rotated since it would be useful to position the spindle horizontally at times.Another review mentions the Z axis has a lot of play or backlash. Most likely the problem is that the Z axis stop nut was set too loosely at the factory. Here’s the fix: You’ll need a 2.5mm allen wrench and a deep 10mm socket. Remove the four allen bolts on the top cover of the Z pillar, unscrew the Z leadscrew from the spindle nut, and remove the top assembly from the mill. Slip the 10mm socket over the leadscrew and tighten the nylock stop nut under the cover (it’s left hand threaded so tighten to the left). Lightly snug the nut then back it off a bit so there’s minimal axial play and the handwheel turns freely. Reassemble and test. The Z axis will be much tighter.UPDATE: After less than a month, and used only on weekends, the motor died. It was running fine when it went “POP”, the GFCI it was plugged into tripped, and that was that. It’s currently at the Proxxon repair center in NC. This is very disappointing considering I’ve had a Dremel for years and it’s taken a beating and still runs strong. Apparently the handheld Proxxon unit also suffers from these types of failures. This review has dropped a star and will be updated after my repair experience.UPDATE 2: Prox-tech repaired the unit and it’s running again. The motor and controller board were replaced. This motor is noisier than the original, similar to what other reviewers have noted, but it is tight with no excessive play as far as I can tell. Turnaround time for the repair was ~2 weeks not including shipping. Since I’m wary the motor is going to die again I’ve been running it at lower speeds, well off max, and it seems to be running cooler. I hope it continues to run for years because it’s still a great little device and fun to use.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Donald R. –

    Used Once, Good So Far
    CAVEAT: I have only used this mill for a couple of hours, only for making very fine cuts in aluminum, and I am not a machinist.That said, I found this mill, in combination with the optional Machine Vise, to be more than adequate for my modest needs. One down side is that there were no instructions for either assembly or use, so one must do a bit of head scratching and problem solving in that regard.Some pics imply that bits are included, but they are not.The the screws provided with the optional vise are too short by approximately 1/4” but will just barely hold the vise by a couple of thread if you’re careful.

    Helpful(0) Unhelpful(0)You have already voted this
  9. Lunette caméra –

    On peut facilement faire de la sculture sur bois avec cette machine. Le bois est le matériel idéal pour apprendre à bien manipuler la machine. Une fois que l’on sait, on peut passer à l’aluminium, le cuivre et à la fin, le fer. C’est une machine bien imaginé pour le petit bricolage. Elle complète bien l’atelier de menuiserie de papa.

    Helpful(0) Unhelpful(0)You have already voted this
  10. Ignacio martinez –

    Excelente maquina, aun cuando vibra un poco, el maneral de velocidades, no se siente muy firme, el desempeño es excelente, lo compre para trabajos de modelismo y caseros, me funciona perfectamente bien, los materiales de muy buena calidad, de metal y suave para manejarlo. Lo recomiendo ampliamente.

    Helpful(0) Unhelpful(0)You have already voted this
  11. Juan Manuel Saavedra –

    Estuve a punto de regresar el artículo por un error de traducción, ya que en el manual en inglés dice 115 voltios y en español dice 230 voltios (error de traducción del proveedor)115 voltios es lo correcto

    Helpful(0) Unhelpful(0)You have already voted this
  12. Brad Martin –

    worked well but burnt out fast

    Helpful(0) Unhelpful(0)You have already voted this
  13. RICARDO –

    Efectivamente hay un error en la publicación, las medidas en pulgadas están correctas, pero no las métricas, yo la compré sabiendo que Proxxon es una marca más bien para hobby, y me gusto mucho. No, no es industrial ni mucho menos.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    − 6 = 4
    Powered by MathCaptcha

    PROXXON MICRO Mill MF 70, 37110
    PROXXON MICRO Mill MF 70, 37110

    $522.90

    HerHealth N Style – Wellness, Fitness & Creative Living Essentials
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart