PLA Pro Filament 1.75mm Cold White,PLA Plus Filament, Odor Free, Clog Free 3D Printer Filament,1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.03 mm, Fit Most FDM 3D Printer

extremely good value PETG!!
Usually I tend to be a little leery of lowest priced products, whatever they might be, but recently I was feeling bold so I bought a couple rolls of the 3dhojor PETG, thinking what the heck, if it doesn’t pan out at least I’m not in too deep.Imagine my surprise to find out that this filament prints cleaner, faster, smoother and more consistently than other brands at double the cost! I compared it directly the other day with Elegoo ‘rapid print’ PETG, printing the same file on the same machine in each filament, and had no trouble at all with the 3dhojor, I loaded it, entered the factory recommended settings, hit print and it produced a flawless model with no re-dos or fussing about with the settings. No stringing, good layer adhesion, no blobs, smooth surfaces, no warping/lifting, awesome first layers.I took the same approach with the Elegoo filament and had to stop/adjust settings/re-start the print 4 times before I achieved an acceptable first layer, and then again when some strange bubbling occured in the fourth layer. Then I had to try to adjust the settings some more to eliminate a rough final layer surface, which was only partly successful.That is the kind of thing that winds up wasting filament, time and money, and so I am now wary of Elegoo filament. But as far as the 3dhojor PETG is concerned, it is now my go-to choice for any PETG project, and I highly recommend it, especially for beginners or non-fiddly inclined makers, as it checks all the boxes.Side note; I have become so weary of constantly having to deal with wet filament! It leaves the factory at 15% and after sitting around in a warehouse, traveling across the ocean and then flying back to Hawaii, it’s at 45%!I dry it, put it in a bag, it sits around for a couple weeks, then when I take it out, it’s wet! So again I have to dry it before I can use it, which is a pain in the behind; I’ve tried the bags that you evacuate too, and after a few days they lose their vacuum, and the filament gets wet. I’ve tried dessicants inside the bags. They just get wet too.( I live in Hawaii, the humidity is brutal year-round ) So finally I said, this has to stop, and designed some simple containers ( PETG ) with a TPU seal and stretchy-clamp dogs to hold the lids down tight against the seal, plus a little plexi window glued in so I can see what’s inside. They keep the moisture out! Finally!! About $10 to make one, and I consider it a good investment.

Consistent Quality and Smooth Printing
This 1kg spool of PLA filament has exceeded my expectations for reliability and print quality. The filament feeds smoothly with no tangles, and the diameter is consistent from start to finish, ensuring accurate, trouble-free printing.Prints come out clean and detailed with strong layer adhesion and very little stringing or warping. The spool arrived vacuum-sealed with desiccant, so the filament was perfectly dry and ready to use right away.I also appreciate the size—1kg is enough to handle larger projects without worrying about running out mid-print. It’s a great balance of quality, quantity, and value, making it a solid choice for both everyday printing and bigger builds.Overall, this filament delivers excellent results and is a brand I’ll happily buy again.

Good Quality Filament with Consistent Prints The filament prints sm
The filament prints smoothly and has good layer adhesion with minimal stringing. Colors look great and the spool feeds evenly throughout the print. I did notice it requires a slightly higher temperature than standard PLA for the best results, but once dialed in, it performs really well. Overall, a reliable and affordable PLA+ option.

Good for a novice
I’m using a Creality Ender-3 V3, which is a newer model. I did my research on filament types, most say PLA does everything and PET-G is more challenging. My experience has been the opposite.I bought Creality branded PLA (rainbow color) and had some good prints. But it had its share of issues. That filament is quite stiff and on at least a couple occasions it stopped spooling because it got twisted up on itself on the reel, and it’s not flexible enough to pull itself off the next winding. What caused me to abandon this filament is it broke off inside the print head once causing a lot of aggravation and having to disassemble the print head. I suppose that’s part of 3D printing, but I need something reliable.Swapped to this PET-G and so far it’s a set and forget filament. Start a 4 hour print, come back four hours later and it’s done with no drama. It does have some very light stringing at times, but it’s a lot more flexible filament that comes off the spool flawlessly. No perceptible fumes, zero issues. It’s also a more glossy finish which looks a lot better than PLA in my opinion.The only drawback I see is that it prints slower and it needs a hotter nozzle and bed temp (250C / 70C respectively). On the textured bed that came with my Ender-3 V3, I’ve had no problems with adhesion, even on tall objects. Simply put, my son and I love this filament for its ease of use and quality of the prints.

So far so good, printing fine and no issues

Bought this filament for my own printer and I’m honestly super happy with it. The matte black comes out looking so smooth and sharp, zero glossy weirdness, and every print has this really clean, pro feel. It fed through my machine with no issues, no tangles, and the layers just melted together perfectly. I ended up printing a couple test pieces right away because I was so curious and they turned out better than I expected. Definitely grabbing this again next time.

いつも、購入していたフィラメント(3千円前後)の品質が悪く(切れる・印刷できない)設定を変更したがお手上げ？・・・たどり着いたのが、このフィラメント。6巻使用しても、普通に印刷。以前購入していたフィラメントより少し安いのでお得。