Geeetech UV LED Curing Light for SLA/DLP/LCD 3D Printing, 405nm 60W UV Resin Curing Lamp with Rotating Bracket, Energy-Saving & Fast Curing for Photosensitive Resin/DIY Enclosures/3D Print
$17.99
Related Products
Product description
1 10-15S Fast Curing
2 60W Brightness
3 Glow Filaments
Package Dimensions : 5.16 x 4.13 x 4.09 inches; 11.84 ounces
Date First Available : September 13, 2024
10-15s Fast Curing: GEEETECH UV light uses 6pcs high-power 405nm resin curing lamp 6W is equal to 60W brightness, which can be cured or dried quickly, shortening curing time. The resin can be cured in 10-15s from a distance of 5cm from the UV resin light. Note: thicker parts need more time to cure.
Durability & Adjustable: GEEETECH 405 nm uv light has last longer and withstands regular use. Large resin UV light size: 115*85*90cm (4.53”*3.35”*3.74”). The back bracket can adjust the angle that it is easy to move around and maneuver to meet the requirements of various curing angles.
Energy-Saving & Safety: The UV lamp for resin power consumption is only one-tenth of that of a traditional UV light for resin curing. Due to strong ultraviolet output, please use eye protection or barriers when using this light.
Wide Compatibility: 405nm UV resin lamp are a fantastic choice for specific applications such as curing resin/adhesives/inks/gel nal, forensics, glow filament irradiation, DIY curing packages, and among other uses.
1-Year Warranty: 7×24 Hours online response. We stand strongly behind Your satisfaction. Any question will be properly resolved if youcontact us through Amazon by sending Email (Click to “Ask a question” through the seller’s store profile).
13 reviews for Geeetech UV LED Curing Light for SLA/DLP/LCD 3D Printing, 405nm 60W UV Resin Curing Lamp with Rotating Bracket, Energy-Saving & Fast Curing for Photosensitive Resin/DIY Enclosures/3D Print
Add a review
$17.99
Brice Johnson –
Great quality
Great light works perfectly for UV Resins
Riley –
Gets the job done
Yup it’s a UV light! Cured prints quite well. Noticed a slight delay on start up but I dont think that is abnormal.
greg –
Great quality light
Just what I needed to cure my Uv resin. Really bright and sturdy case! Well made.
Asteli –
Works well for post-curing SLA photoresins, is absolutely not a 60W lamp.
I have tested this lamp, with a total on-time of approximately 1 hour. It appears to function well, however it is not a 60W lamp. On the bench, this lamp pulls 10W (measured with a Kill-A-Watt). This isn’t a huge issue for me, but if you actually need a UV lamp that has the light output of a 60W lamp, you should probably get a proper UV source.1 star off for misrepresenting the power spec.
Bill –
Works as advertised.
As a relative newbie to UV resins, I started out using a UV flashlight for curing. This quickly became cumbersome, slow, and inefficient. However, this light helped a great deal after I built an adjustable stand, allowing me to do other things while the resins cured. Colored resins take longer to cure, and this light allows me to set it up and cure a much larger area, providing a more uniform curing process.
Amazon Customer –
Great quality
Came as advertised, workd great for cureing 3d resin prints. Great product for the money.
sabine ajanovic –
Good quality
Very solid build quality. On off switch and good length power cable that plugs into the wall. It’s larger then I was expecting which is not a bad thing at all.
Kate –
Lasted less than a month
I’m not impressed with this light. I use it for UV resin curing (craft, not 3d printing,) and as a result, I’m often directing the light by holding it and pointing it at my work. (Yes, I protect my eyes.)This lamp is hotter than others of its build style and wattage. This lamp is dramatically dimmer and no longer cures resin quickly after less than a month of use. The light I got it to replace (and foolishly left at my brother’s house over a visit,) has lasted more than a year with superior results. This got two stars as it worked initially. I will not buy from this brand again.
Dakota Ryan –
Geeetech UV Curing Light: A Budget-Friendly Resin Curing EssentialGeeetech’s UV Curing Light is a solid choice for beginners and budget-conscious resin printing enthusiasts. While it lacks some advanced features found in pricier models, it gets the job done effectively.The compact design is perfect for smaller workspaces, and the turntable ensures even curing of your prints. The 405nm UV LED lights are powerful enough to solidify most common resins, and the adjustable timer allows for customization based on your specific resin and model size.Assembly is straightforward, and the reflective interior helps maximize the light’s effectiveness. The light does have a small footprint, which means larger prints might not fit entirely inside. Additionally, the build quality feels a bit flimsy, so handle it with care.Overall, the Geeetech UV Curing Light is a great value for its price. If you’re looking for a no-frills, reliable way to cure your resin prints without breaking the bank, this is a worthwhile option. It may not have all the bells and whistles, but it delivers on its core function – curing resin – without any major issues.
Rob Anderson –
MUCH more powerful than those little blacklight flashlights.I’m able to cure things much faster than before.I mainly used this light to cure the Elegoo water based resins.Remember to wear eye protection.
S. A. –
Great and solid case, good for 3d resin.
Michael H –
Using to cure 3d prints and it does a good job.
Rob –
It does exactly what it’s supposed to do! I can cure a resin print in about 2-3 minutes with it slowly spinning.