






Product description





Which plate is right for you?
GSI: Grip Strength Index (Rated form worst to best on a scale form 1-10)
Brim Sstting recommendation
1-6 (OK adhesion) : Highly recommended to use brim7-8 (Good adhesion) : Brim not needed, But if your print is particularly hard to print, use brim to improve adhesion. If only odd corners are lifting, use mouse ear pads on the corner9-10 (Extremely Good adhesion) : Do Not Use Brim unless your part is extremely small or prone to warping; single-layer brim will be hard to clean off of the plate

Filament Compatibility Chart
HT: Heatbed Temperature
FMRT: Filament Manufacturer Recommended Heatbed Temperature AFMRT: May require temperatures Above Filament Manufacturer Recommended Heatbed Temperature
AAR: Adhesion Aid Reccomendation
NAR: No Adhesive Required MRA: May Require Adhesive depending on filament
AR: Adhesive Reccomended

Effortless Print Removal
Simply bend the surface slightly, and your finished print detaches cleanly without the need for scraping or prying tools.

Textured Suface finish
BIQU CryoGrip Pro Frostbite Panda BuildPlate allows your printer to display Frostbite texture at the bottom for a better printing experience.
Package Dimensions : 11.3 x 10.43 x 0.55 inches; 14.39 ounces
Date First Available : December 4, 2024
Manufacturer : BIGTREETECH
ASIN : B0DPL539NS
Best Sellers Rank: #7,435 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #7 in 3D Printer Platforms
Customer Reviews: 4.3 4.3 out of 5 stars (1,291) var dpAcrHasRegisteredArcLinkClickAction; P.when(‘A’, ‘ready’).execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( ‘acrLink-click-metrics’, ‘click’, { “allowLinkDefault”: true }, function (event) { if (window.ue) { ue.count(“acrLinkClickCount”, (ue.count(“acrLinkClickCount”) || 0) + 1); } } ); } }); P.when(‘A’, ‘cf’).execute(function(A) { A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { “allowLinkDefault” : true }, function(event){ if(window.ue) { ue.count(“acrStarsLinkWithPopoverClickCount”, (ue.count(“acrStarsLinkWithPopoverClickCount”) || 0) + 1); } }); });
【Perfect Compatibility】BIQU CryoGrip Pro Frostbite is suitable for 3D printers with a platform size of 257x257mm, this panda build palte is perfectly compatible with Bambu-Lab P1P, P1S, P2S, X1C, X1E, A1 3d printers.Please close the detection funtion when you using P2S 3d printer.
【Unmatched Adhesion, Zero Heat】BIQU CryoGrip Pro Frostbite delivers unparalleled adhesion for PLA and PETG at room temperature, reducing warping of large prints and remaining scratch and wear-resistant over long periods of time. Realize No Glue required printing.
【Cool and Clog-Free】Uniquely designed to print PLA at low temperature, saving heating bed time and 50% energy consumption. The CryoGrip Pro Frostbite prevents your filament from softening and slipping in the extruder due to high chamber temperatures It can also be used for PETG filament (50-70 ℃). NOTE: It‘s not recommended to use ABS and TPU filament as they may require the use of a scraper to remove printed parts, which can easily damage bottom.
【Intricate Markings AR Code for Bed Detection】An AR code is included on the build plate to ensure it is recognized by the X1C, eliminating setup errors for a hassle-free printing experience.
【Effortless Print Removal Bend and Pop】The CryoGrip Pro series provides excellent adhesion while still allowing prints to be easily removed by bending the plate. For larger or more intricate prints, use a scraper to gently lift the edges, then pry them off carefully. If a print sticks too firmly, place the plate in a freezer for 10 minutes to assist with removal.
【Scratch-Resistant, Easy to Clean】Scratch-Resistant & Self-Recovering for Ultimate Durability. A simple wipe restores its adhesion. NOTE: Please use water + soap only to clean the cryogrip pro frostbite build plate. Do not use solvents (e.g., alcohol) as these may cause permanent surface damage.
9 reviews for BIQU Cryogrip Pro Frostbite Panda Build Plate 257x257MM for Bambu-Lab P1P, P1S, P2S, X1C, X1E, A1 3D Printer
Add a review
$32.99

Danny Vargas –
Perfect Upgrade – Excellent Adhesion and Easy Release!
I recently upgraded my Bambu Lab printer with the BIQU Cryogrip Pro Frostbite Panda Build Plate, and I’m beyond impressed. Right out of the box, it feels premium and well-constructed. The 257x257mm size fits perfectly on my A1, and it’s also fully compatible with my A1 and X1C.What really stands out is the phenomenal bed adhesion – prints stick firmly during the job, even with tricky materials like ABS and PETG. But once the bed cools down, the parts literally pop off with zero effort. No more scraping or damaging prints!The surface is durable, heats evenly, and has held up great after multiple prints. I’ve also noticed improved first-layer consistency, which is a huge plus for reliability.If you’re looking for a dependable, high-quality build plate that saves time and frustration, this is a must-have. Definitely one of the best upgrades I’ve made to my 3D printing setup.
Mike –
Said I wouldn’t, but I did, and I like it.
I have had my Biqu B1 SE Plus for a while now, and I really like it after dialing it in. The last thing I didn’t like about it was the stock glass build plate. Don’t get me wrong, the adhesion on the glass plate is fantastic, nothing moves, ever, even when you want it too. I’m sure there is a “sweet spot” with it because one or two times the print popped right off. The majority of the time I was using the scraper to pry things off and realized that eventually I’d break the thing.With that in mind I went searching for a better option. Now, I have more than a few printers and I’ve always swore up and down that i would never, EVER peel the film off of a sticky magnet and permanently attach it to a hotbed. So i ordered this simply because of the brand name, I assumed that at the very least it would fit the machine AND it looked thin enough I could probably just clip it to the top of the glass bed to use it. Also, no mention of stick on magnet!Soo I ordered it and another one that did come with a sticky magnet that I planned to throw away, haha. Anyway, as soon as I opened it I was unsure. It wasn’t like the bendy plates on my Enders or my Anycubics. But, I’m desperate for a solution here. I threw it on top of the glass, bent the clippy things to hold it (kinda lol), ran the auto level, checked the z offset and hit print.I’m not gonna lie, I was blown away how well it worked with no effort on my part at all. Ran the whole print, pushed on the part as it finished and it didn’t fall off. I finished my dinner and came back after everything cooled, the part lifted right off of the plate, no effort. I ran the part a second time and tried to push it off while it was running, it was stuck pretty good. I let it finish again and tried to remove it while it was still warm. It took a little effort, but not excessive. Keep in mind with the clippy things holding it, it was visibly not flat, at all haha. Of course this was my fault for the way I had it assembled, but it didn’t stop it from working.So, I opened the other plate i had ordered and checked if the magnet was the same size and sure enough, they matched perfect. I had a quick internal dialogue about how “I would never” and then I peeled that paper off and stuck that magnet directly to the machine. Next I ran the auto level again, loaded a new g-code and sent it on its way again. Again, perfect adhesion. Once this thing was flat against that magnet it is even better!!Changed my whole philosophy and I’ll never look back! I highly recommend this one and if you can find it with the sticky magnet included, buy that one!I’m actually curious to try the other plate I bought now (the one that donated it’s magnet lol).
D. Hotaling –
Excellent adhesion. Love the surface it makes.
Excellent so far. PLA holds real nice using bl supertack defaults. I have a supertack and it must be defective because all I had were adhesion failures with it right from the start. No issues with this. I printed the card shuffler on MW and zero issues with any of the prints. I love the smooth/flat surface it makes. You can just see the lines in it but overall it’s really nice looking and def a good alternative to textured PEI.With PETG I did have some corner lift on a large flat piece that was near the aux fan I have an aux fan diffuser but should have turned down the fan speed and probably bumped up the bed temp.I’ve done a dozen prints and still haven’t cleaned the plate. Adhesion is still great. I also like the color, really brightens up the camera feed.
Richard –
Important stuff to know…
I’m quite happy now, with the plate. But you need to know a couple things.1. I really like the mattie texture. The pic is of something I made months ago, so ignore the scuff’s. But you need to account for it during calibration. I would use calipers on the plate calibrarion swatch and tried to hit my normal .2mm and the nozzle nearly scraped the bed. You probably want to go with .25 or .3 to account for the texture.2. Out of the box, there was a super thin coat of some kind of shellac on it that prevented proper adheasion. But it slowly flaked off in tiny pieces during the first 5 or 6 prints. Afterwards adhesion seriously improved. Now, I clean the plate more out of habit than to insure adheasion.3. See plate photo, the grip tab might get in the way of your screen view but most printers let you push the platform back. All the same, If this would annoy you, be forewarned. It’s only a problem during printing if you’re using the back of the plate. Otherwise, it’s a great idea as it never really gets hot. So you can grab it regardless of bed temp.
Jonas Berntsson –
PETG sticks almost as good on this as on the smooth PEI sheet I normally use…but is getting a bit worn. Thin and both sides are coated. I like it!
Ben Surinx –
Beste 3D printplaat die ik ken, ik heb deze ook voor mijn Ender 3 Max en Balco 3D printer.Snelle levering.Super tevrede.
ARK –
Dit product is echt een aanrader!Ik gebruik veel PETG filament wat niet altijd even makkelijk is om mee te werken. Voor dit materiaal is een goede instelling van je printer essentieel met een goede bildplateIk heb diverse merken geprobeerd maar deze bildplate springt er voor mij als beste bovenuitGeen lijm nodig en toch een goede hechting bij het printen ( ook bij kleinere oppervlaktes)Na het printen even de bildplate buigen en het ontwerp springt ervan af,,, even met een doekje en wat alcohol schoonmaken en de plaat is weer als nieuw
Riri3D –
Utilisé avec filament Asa température buse 240°. Plateaux 100°. D’abord sans dimafix pour des essais et c’est beaucoup de warping. Par contre avec dimafix et essai avec exactement la même pièce c’est impressionnant. L’accroche est top. Même la couche de la jupe est difficile à enlever. Ça colle vraiment. Une fois refroidit on tord à peine le plateau métallique et ça se décroche tout seul. Je l’ai acheté car avec dimafix ça colle tellement que la pièce arrache le verre du plateau même froid. C’est sûr qu’on a pas de warping mais il est presque impossible d’enlever la pièce sans tout casser. L’astuce du plateau flexible est parfaite.Utilise avec chiron 3D avec bien sur le plateau plus grand et surtout cassé donc inutilisable. Ça lui redonne une seconde vie. Pour calibrer les 25 points j’ai collé de morceaux d’aluminium de 2mm d’épaisseur au endroit où passe la sonde et le tour est joué
Julio Torija –
Buen producto pero sigue despegandose el material