ANYCUBIC Photon Mono 4, Resin 3D Printer with 7” 10K Mono LCD Screen, Stable LighTurbo Light Source and 70mm/h Fast Printing, Print Volume 6.04” x 3.42” x 6.49”
$33.99
Related Products
Product description
The Choice of Entry-level 
10K Ultra High Resolution 
Photon Mono 4 comes with a large protective film for LCD screen, If you have printing problems when using it, Please try the following stepsFirstly, try increasing the bottom exposure by about 5 secondsAt the same time, try cutting the scratch resistant film to just cover the exposed screen
Powerful LighTurbo Source 
The Story is in the Details 
Dream Big, Think Big, Print Bigger
With a generous maximum print volume of 2.2L (153.4mm*87mm*165mm), you have ample print space to easily tackle your daily tasks and demanding projects.
More Cohesive Platform 2.0
With a re-engineered build platform and redesigned laser-engraved patterns, this generation of build platforms provides just the right amount of adhesion to mitigate model lifting and warping during printing while keeping the removal process simple and smooth.
4-Point Leveling Efficiency
Every Mono 4 printer was assembled, calibrated, tuned, and tested before shipment. So when you received the printer, simply unbox and start printing. (Leveling is needed before printing.)
Pick Up Where You Left Off
When a sudden power outage interrupts the printing process, the printer is designed to resume printing once power is restored. This feature significantly reduces waste of materials and time.
What slicing software do I need?
It is recommended to use the official Photon Workshop slicing software, which supports exporting .pm4n format.
What should I do if the print fails?
The model is not supported → automatically generate support with the software
The platform is not flat → re-level
Underexposure/overexposure → refer to the parameters recommended by the resin manufacturer.
How to maintain our FEP Film
FEP film is a consumable material that needs to be replaced reoularly to keep stable printing perfomance
Please use the plastic shovel we provide instead of a sharp shovel to clean the resin vat, or may damage the FEp film and cause resin leakage
How long is the life of the LCD screen?
About 2000 hours of normal use.
How to improve the printing success rate?
2 key tips: Place the large model at a 45° tilt to reduce stress/Replace the FEP film with a new one when the printer indicates that the FEP film has reached the end of its life.
ANYCUBIC’s
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.4 out of 5 stars 345
4.6 out of 5 stars 88
4.2 out of 5 stars 1,686
4.2 out of 5 stars 1,686
4.6 out of 5 stars 3,226
4.7 out of 5 stars 10,076
4.7 out of 5 stars 10,076
Price
$179.99$179.99
$239.99$239.99
$439.99$439.99
$664.99$664.99
$85.49$85.49
$15.33$15.33
$25.99$25.99
LCD Type
7” Mono LCD
7” Mono LCD
10.1‘’ Mono LCD
13.6” Mono LCD
—
—
—
Light Source
Matrix
COB
COB
COB
—
—
—
Build Area
6.04” x 3.42” x 6.49”
6.04” x 3.42” x 6.49”
8.77”x4.96”x9.05”
11.8” x 11.7” x 6.5”
—
—
—
XY Resolution
9024×5120(10K)
9024×5120(10K)
13312 x 5120(14K)
6480 x 3600(7K)
—
—
—
Max Printing Speed
70mm/h or 50mm/h
120mm/h or 70mm/h
170mm/h/or 130mm/h
60mm/h
—
—
—
Materials
High Speed or 405mm Resin
High Speed or 405mm Resin
High Speed or 405mm Resin
High Speed or 405mm Resin
—
405nm UV-Resin
High Speed Resin
【7” 10K High Resolution】Photon Mono 4 boasts an impressive 105% increase in print precision compared to Mono 2. With a resolution of 9024×5120, each pixel measures a mere 17×17μm on the X and Y axes. This enhanced capability allows for creating models with exceptional detail and dynamic richness.
【Powerful Light Source】The time-tested Anycubic LighTurbo matrix light source technology delivers stable, balanced, and uniform lighting to reduce layer lines and rasterization, creating models with ultra-smooth surface and maximum print details.
【Sufficient Print Size】With a generous maximum build volume of 6.04” x 3.42” x 6.49”/153.4mm x 87mm x 165mm, you have ample print space to easily tackle your daily tasks and demanding projects.
【Laser-engraved Print Platform 2.0】With a new design, the laser engraving platform of the photon mono 4 improves adhesion to mitigate lifting and warping of the model during 3d printing, while keeping the removal process simple and smooth.
【User-friendly Function】The 4-point leveling method is ideal for beginners, after the first leveling and tightening the 4 screws, no need to repeat leveling. Photon mono 4 can resume printing when power is restored, effectively reducing material and time wastage.
Anycubic APP service is not support for Photon Mono 4
13 reviews for ANYCUBIC Photon Mono 4, Resin 3D Printer with 7” 10K Mono LCD Screen, Stable LighTurbo Light Source and 70mm/h Fast Printing, Print Volume 6.04” x 3.42” x 6.49”
Add a review
$33.99
Wesley N. Lewis (946) –
Very impressed!!
Bought this on sale and have been so impressed with the smooth, detail oriented quality prints & ease of use. Perfect for serious printers who are eager to print. Highly recommend!!!
YH –
Impressive Print Quality & Easy to Use
I was a little hesitant about getting into resin printing, but the ANYCUBIC Photon Mono 4 has completely won me over. Right out of the box, setup was quick and straightforward. The instructions were clear, and within an hour, I had my first test print done.The print quality is fantastic—sharp details, smooth surfaces, and minimal layer lines. I’ve printed miniatures, custom parts, and even some intricate models, and everything has turned out beautifully. The monochrome screen speeds up print times while also lasting longer than traditional LCDs, which is a huge plus.I also appreciate how user-friendly this printer is. The resin vat and build plate are easy to clean, and leveling is simple compared to other printers I’ve used. So far, I’ve had zero failed prints, which speaks to how well-calibrated this machine is.If you’re looking for a reliable, high-quality resin printer at a great price, this is definitely the one to get. Highly recommended!
Rodrigo –
Great entry level printer
This printer is my first foray into printing 3d models of characters and the setup was quick, and quite easy despite that the leveling is manual it is also straightforward, and the overall user experience is beginner friendly. I really like the laser-engraved build plate and resume function, plus the included tools helped me out quite a bit for a first print.Print quality is consistently high, even with minimal settings tweak on the slicer, I did notice some lines on my print but I feel like that is more due to my settings and trying to understand things.However it also has its downsides which include a mostly plastic build, a small low-quality touchscreen, and a slicer (Photon Workshop) that can be buggy, so I ended up using two slicers with the Photon just for printer settings and export. ALSO the biggest downside is the FEP is a whole unit complete and stretched that is not compatible with any other models and you do need to buy specifically, which I had to do it asap due to it quickly making my prints fail due to the lightest scratch. Still, for the print quality and price, it’s a great entry-level resin printer with good results.
Tony Iamonico –
Awesome Printer!!!
This printer is ideal for printing miniatures. There is a lot to learn about doing it correctly without damaging your printer so use caution.
Walter Cross –
impressive
Fantastic resin printer. My first resin printer, and very easy to use. My second Anycubic product, and have never had any issues with them.
Brianna –
Difficult to use, randomly stops working
My top recommendation is to place the 3D printer on a level surface. You’ll likely need to level the machine multiple times before it finds its “sweet spot.”Second, pause the print after about 20 minutes to check if it’s printing correctly. In my experience, it took 13 attempts and 11 rounds of leveling before I achieved a successful print. Once it was properly calibrated, the machine required minimal additional effort.My product did come in with a damaged VAT which caused resin build up between the VAT and the bottom screen, but I appreciated that the support team proactively reached out to offer help and provided guidance on getting the printer up and running. I’m looking forward to completing my second successful print soon.I managed to get 1-2 prints out of it….but it stopped working after only 2. I’m looking at the LCD screen now and everything is lighting up but the shape of the square now isn’t changing. I’m incredibly confused.
Matt –
For the price, this is an excellent entry level resin printer.
I got this resin printer because I had a client that needed some things that just required too much detail for a traditional filament printer to handle. I went with the mono 4 because I didn’t need large capacity or anything fancy, just an easy to set up and use printer.For it’s price, this is a heck of a deal. Set up was easy and I was printing within 30 minutes. Build plate adhesion is excellent, so long as you pay attention when slicing. Resin typically sticks stronger to the bed than you would expect if your’e coming from FDM, so be aware of that. The speed of printing and quality were what I expected, and both were very good. You can achieve resolutions small enough that layer lines are virtually invisible. As for the smell, that’s a part of any resin printer and will vary depending on what resin you’re using. I ended up putting it in our garage so I can vent it outside and really only notice it when I remove the hood. Of course PPE is strongly recommended.
Drew –
Amazing for the price
Amazing printer for the money. Is very user friendly. Would recommend to anyone pro or beginners
COSIMO –
Stampante veramente ottima
Rosa –
Hola buen día, adquirí este producto con ustedes, me gustaría que me dieran orientación ya que la impresora no reconoce los archivos de la usb que agregue para imprimir, si reconoce y ya imprimí los archivos muestra que traía la usbMuchas gracias
Antonio M. F. Fonseca –
Impressora incr’vel. Tinha uma antiga photon e esta supera em tudo, desde tempo de impressão, qualidade da impressão e extremamente silenciosa (nem parece que está funcionando). Recomendo
Oliver Valadez –
los fallos de impresión son maso menos comunes y con esta cosa aprendi lo que es una quemadura quimica y clavarme una espátula en el dedo hasta el hueso, a pesar de todo no me arrepiento de mi compra, yo y mis figuritas lo aprobamos
Blackbird Lozano –
Cuidado con esta impresora, al parecer todo el lote viene con la misma falla del eje “Z” axis imposible realizar calibración, mucho menos usarla, ya hice retorno del equipo y volví a comprar pensando era una falla aislada y no, la 2da que compré llegó igual.