3D Printer Filament 1.75mm, Neatly & Strong 1.75mm Filament for 3D Printing, Accuracy +/- 0.02mm 1KG Spool(2.2lbs), ABS Flesh 1KG
$15.99
Related Products
【Use Requirements】Printing temperature: 240-260 ℃, hot bed temperature: 90-100 ℃, printing ABS filament needs to have a closed and sealed environment for the printer, so that the printed product will not warp, the finished product is better adhesion between the layer and the layer, and the impact strength is more excellent.
【Use Requirements】Printing temperature: 240-260 ℃, hot bed temperature: 90-100 ℃, printing ABS filament needs to have a closed and sealed environment for the printer, so that the printed product will not warp, the finished product is better adhesion between the layer and the layer, and the impact strength is more excellent.
【Less Odor, Less Warping & Bubble-Free】This ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor and low warpage during printing. Complete drying for 24 hours before vacuum packaging. Enclosed chamber is required for better printing quality and durability when printing big parts with ABS filaments.
【High Stability and Durability】Likesilk ABS Roll are made by commonly used ABS, a strong and tough thermoplastic polymer—great for creating parts which needs to be resistant to high temperatures; Due to the high stability and various post-processing options (sanding, painting, gluing, filling), our ABS filaments are excellent choice for engineering production or prototyping.
【Good physical properties】 Tough, hard, good rigidity, no delamination, no warping. Excellent abrasion and corrosion resistance, good dimensional stability.
【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these ABS filaments of 1.75 mm diameter, dimensional accuracy +/- 0.03 mm1 kg spool (2.2lbs).
12 reviews for 3D Printer Filament 1.75mm, Neatly & Strong 1.75mm Filament for 3D Printing, Accuracy +/- 0.02mm 1KG Spool(2.2lbs), ABS Flesh 1KG
Add a review
$15.99
Sergio Siragusa –
I love this Filament
Personally, I love this filament. I’m using it in my Voron and have no problem whatsoever. It prints smooth with a good finish. I love the price as well. If you’re not getting good results with this, it’s not the filament, it’s your printer set up. Tuning the printer is key to get great results from most printers.
A Smith –
Bang For Your Buck
this was really good filament. I didn’t have to dry it out the box and it was really reliable.
EsQueue –
ABS filament holder can’t handle filament dryer, but PLA printed parts can. Spool size issue too.
Feedback updated to 1 star after trying to use this. It is too warped to use. I tried taking the spool apart to use on literally any of my other spools but the center diameter of this weak spool holder is designed too small so I had to manually transfer from one spool to another with a drill. This is a major pain and brings it down to a 1 star as I’ll never purchase this again whether or not it prints good. Some others complain about this, but I didn’t understand as they only complained about propriety spool but now I understand. The center spool makes it not possible to easily disassemble the spool holder and transfer to another spool that will not melt faster than PLA. It’s like they created a problem and created a barrier to keep it from easily being remedied.So far, 3 start right off the bat and I’ll update depending of the quality of the print. This is an ABS spool but the spool holder plastic is weaker to heat than my literal PLA parts. I put it in my Sovol SH02 for 10 hours at 65°C but woke up after 8 hours to see the spool severely warped. I then ended up manually rotating it so the spool didn’t fall over. I also threw in my silica holder made of extremely thin extruded PLA and that is fine (see picture), My threaded PLA spool holder has also survived many drying sessions. Depending on the quality of the ABS prints, the rating can change. I’ll update. This was just a quick review for anyone who is planning on drying their filaments, to avoid this brand. I don’t think that this spool can survive any heating at all.
EchoNaturx –
A trusted brand
I’ve bought other colors and types of filament from this brand before and the print quality, color, and adhesion is always consistently as good as other brands that are far more expensive. I’ve never had any problem with adhesion, stringing, or brittleness. This is a great value for money
Dave –
The white ?
Mostly tried this because of price and if my ad5m could print ABSNew clueless, but prints small things well with factory slicer settings… all on my ignorance so far to adjust the settings for bigger things . The one on the right was printed with a number 6 nozzle ,the flash print slicer and the brim turned off.Being said, the white is white until next to something white,it does have a slight hint that looks purple to me.Printer is enclosed and I’m printing from a dry box… heard it matters..
Mfg –
Great ABS
This stuff prints awesome. Using a simple Ender 3 and tent. Doesn’t smell too bad either
Secret Recipe –
Good deal purple
I like the purple, it was a good deal
paul –
Good filament for the price
So far so good for the price.
Matthew H. –
Turned up promptly with Prime. Loaded into my Bambu Lab AMS-HT and started a ABS drying cycle. Checked about 4 hours later and the spool itself had softened and deformed to the point of not being usable. ABS loaded onto a spool that can’t withstand standard ABS drying temps. Terrible, don’t buy.
average joe –
Prints well
Ben –
It says +/-0.02mm in the description but the sticker on the reel says +/-0.03.Naughty!!I’ve not tried printing with it yet.
Kindle Customer –
first roll i purchase was perfect seconds roll was disformed and failed the print due to getting stuck