3D Print Removal Accessories– 3 Piece 3D Printing Removal Tool Kit – Thin, Durable Tools to Remove Models from 3D Printers
$21.53
Related Products
Product description
The AMX3d 3D Print Removal System solves all your 3D Print Removal problems with one comprehensive set of 3 tools designed specifically for 3D printing. Whether you print on a heated glass bed, aluminum or other metal bed; whether you prefer hairspray, glue or tape, whether you are removing large prints or small, intricate and/or delicate prints, this set of 3 tools makes the job easy – without damaging the print or the print bed.
The problem with other 3D print removal tools is that they are either strong enough to lift a heavy print but too thick to slide under without nicking or marring the print edge or thin enough to slide under a print but bend and flex easily – often destroying the tool without removing the print.
Our 3 tool 3D Print Removal System solves these problems once and for all. With these tools, you’ll never pry the print off the print bed, instead, they are designed to work together to slide under even the largest prints and gently separate the print from the print bed… without damaging the print or the tools!
The High Quality finished wood handles each have 2 strong pins holding the blade to the handle (vs. most that don’t have pins at all so their handles pull off in the middle of the job). Put simply, the tools work and they last!
Remember: The Best Prints Start with the Best Tools!
These 3 tools, used together, will solve ALL your 3D Print Removal challenges:
LIFT your 3D Print – NO PRYING NO DAMAGE to the print or the print bed. Tools work separately or together to GENTLY LIFT ANY PRINT…large, small, delicate. STRONG, DURABLE pinned tang construction – the wooden handles can’t come off!
First, Meet the Tools
Ultra Thin Removal Tool
First, our Ultra Thin Removal Tool. With a super thin edge, this flexible tool slips easily under the print The 17.5mm thick handle makes it comfortable to grip and the carved finger slots make it easy to exert the pressure required to break the initial seal between the print and the print bed. For small prints, this may be the only tool you need!
Medium Removal Bar
The Medium Removal Bar measures a little over 20 cm (8″), equally divided between handle and lifting blade. The 10 cm (4″) lifting blade is a little thicker but still flexible. After the Ultra Thin Removal Tool has broken the seal in one corner of the print, this tool slides underneath it and under the print to break the remaining seal.
Large Removal Bar
The Large Removal Bar measures almost 30cm (12″) with a 17 CM (6.75″) lifting blade. This tool is even stronger with a 0.7mm thickness at the edge. It’s large length ensures it can reach across almost any 3D print. This tool is extremely useful for those large and/or especially delicate prints.
How to use the AMX3d 3D Print Removal System
Step 1 (All Prints)
Using the Ultra Thin Removal Tool, slide the tool under the edge of the print. For small prints, this may be enough to remove the print from the bed. Remember… Don’t pry, simply slide the tool under the print.
Step 2
If the print is still affixed to the Print Bed, gently slde the Medium Length Removal Bar under the Ultra Thin Removal Tool. The 10 cm (4″) blade will go deeper under the print. Slide it under the print as far as you can easily go without damaging the print.
Step 3 (if necessary)
Still gripping? Now we call in the “big guns”. Leaving the Medium Length Removal Bar in place, slide the Ultra Thin Removal Tool across the edge of the print to the next corner/edge.
Step 4 (if necessary)
Remember – Don’t pry – use the thinness of the blade to slide under the print.
Step 5 (if necessary)
Sliding the Large Length Removal Bar under the Ultra Thin Removal Tool, slide it under the print to gently lift the 3D print from the print bed.
Step 6 (if necessary)
Simply slide the tools together and push back until the print is released! Viola – Every print removed easily, without marring the print edges or damaging the print bed.
EASY REMOVAL: Our tool kit ensures that you can easily lift – not pry – your models from the 3D printer print bed every time.
NO DAMAGE: The accessories allow fast and efficient removal of your 3D prints without damaging either the model or the print bed.
3 PIECE KIT: The 3D printing tools are designed to be used either separately or together to gently lift your prints, however small, large or delicate.
TOUGH & DURABLE: The high quality wooden handles are pinned to the blade to keep them firmly in position, for reliable results however tough your 3D print removal!
AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing supplies of the highest quality. If there are any problems with your Removal Tool Kit just let us know!
9 reviews for 3D Print Removal Accessories– 3 Piece 3D Printing Removal Tool Kit – Thin, Durable Tools to Remove Models from 3D Printers
Add a review
$21.53
Anthony J. Ethridge –
excellent and sturdy, Best tools I have used so far
perfect removal tools if you have glass or other ridged build plate. The last removal tool I had kept bending and eventually broke in half. I like that the metal is thicker and sturdier and goes through the entire handle. The three different sizes all work together to remove large prints easier.You do have to exercise caution when using tools of this type. The short, round spatula tool has a sharp edge to get under the print. If you are not careful you can cut or scratch yourself if the part suddenly detaches while you are applying force.
Hawk eye –
Should’ve bought these in the first place!
I’ve been 3D printing for a few years now, and have gotten by with some no-name-brand pallet knives. Recently, I had a glass build plate cleanly break on me while trying to remove a print, and it ruined the pallet knife I primarily use.The other pallet knife is crinkled, so I tossed it as well and bought these, and boy do I wish I had discovered these sooner!The thin spatula has been handling all my prints with ease so far! I really appreciate it’s expansive surface area- that makes getting larger prints off the build plate MUCH easier in comparison to a standard width pallet knife! The sharpened nose helps get under the print too- but it’s not razor sharp, so you don’t have to worry about cutting into build sheets or scratching glass plates.So while I haven’t tried using multiple tools to remove a print yet, I feel really confident that between all three of the tools in this kit, I’ll be able to remove practically anything I build in my 3D printer!
John O. Champney –
Made well and easy to use.
The spatulas work well when needed to remove prints and strong enough to get the job done.
Dante Nava –
Great… but careful, it’s sharp!
Ok, I’ve bought 2 of these now; the second was a gift. I really only use the one tool, but I use it EVERY. TIME. It’s great! I love it. I’ve realized there is a knack to removing items from the build plate, and maybe I’m just too lazy to get the others out, plus my build plate isn’t huge. It manages to get under everything on my glass build plate. I recommend it highly. My only warning is shown in the picture. It’ll cut you if you’re not careful! Over the last few months it’s also gotten a little lose in the handle which makes me a little sad cause the handles are very nice looking and feeling wood.
Dean, Monument CO –
Made to last, works well, every 3D Printer owner should have the set.
I’ve been using these tools for about a month now. After watching there video, I found them to work as advertised. I like the wooden handles and the strong thin steel on the working end. I would recommend them to any 3D printer owner.Well worth the cost. I like the box they came in an use it to keep them together (until I print a wall holder for them). Each tool has its own clear case. I appreciate that, but unless I travel with them I don’t see any practical need.
Michael I –
Works great
I use this on my Ender 3 with a heated bed. I was having some issues getting larger pieces off of the bed with the scraper that came with my Ender 3 so I gave this a try. It seems like 90% of the time im able to pop the piece off using just the thinnest scraper from this set but on the really big/stuck on pieces I have used all three and im glad I made this purchase.
John M. Baughman –
Excellent tools for the job
These work great! Haven’t had a need to use all three at once like described, but the 2 at a time has come into play and worked fantastic. The main spatula is a bit flexible and can bend so use caution when applying pressure during use.
Ron C. –
Well designed, but…
A well made set of tools. But, I still struggle to get the prints off. I got them to make removing easier. So far, not any better than using the Cricut scraper. Takes a lot of effort to get the prints off. My set was not as good as been reviewed.
Mark MacConnell –
Excellent print removal tool. It works really well. Prints are easily lifted off the bed. I bent the long lifter 45 degrees just before the handle, so your knuckles don’t scrap long the print bed.