1 Gallon Crystal Clear Epoxy Resin Kit, High-Glossy& No Bubbles, Art & Casting Resin with 16 Epoxy Resin Pigment, Foil Flakes, Sequin,Craft Clear Resin for Art Crafts, Jewelry, Molds

Great brand of resin that gives professional quality results.
I have been using this epoxy resin and it is great. Reliable, clear, easy to use, and its the best resin I’ve used so far. Well worth the money. There’s A learning curve to using resin. Here’s my method and tips: if you have long hair, tie it back. Its inevitable you’ll get resin in your hair if you leave it loose. Wear old clothes and shoes. You’ll get resin on them. Buy some denatued pure alcohol, ethanol, to clean up with. It works way better than isopropyl alcohol. Use a level to check that your work surface is level in all directions. Cover it with waxed paper. Overlap the edges of the waxed paper by at least an inch. To measure and mix this resin easily, use the pumps to do that. Use a big clear plastic cup. I use two wooden coffee stirrers to.mix with. Alternate 1 pump of A, and 1 pump of B into your cup until you have the needed amount. That way its already partly mixed in your cup. Now, stir it thoroughly. At first it will be cloudy and have streaks. Once its totally mixed it will be clear with no streaks. Be sure to scrape the sides of your cup while stirring. Once its clear, its ready to.pour into your silicone mould. Don’t over fill your mould. Let your filled mould sit undisturbed for 48 hours. If there are any rough edges or you got your mould a bit too full, use a utility knob be to trim.off excess. If your make my charcuterie boards, let them cure longer, until it’s 72 hours from pouring, on a flat surface. I’m currently doing charcuterie boards with dried flowers and sea shells. I do one pour to fill the moulds half full and embed the inclusions in it. Dried flowers and greenery tend to float so be sure to press them down into the resin. I do that with my fingertip and then clean my hands with thevdenatured alcohol. With dried flowers, I make sure they are completely coated with resin on the back side, the upper side while working on them. About 6 to 8 hours later, I use waterproof India inks to create a colored background on the resin. I let the ink dry, then do the second pour to fill the mould. If have ordered colored mica powders, and translucent resin dyes to begin doing more types of effects and backgrounds. I’ve been using this resin to.make coasters and bookmarks, too. I sell my stuff in my stall at a big farmers market, with my other wares. I highly recommend this brand of resin because it never fails or has problems. I do not have any problems with bubbles, and getting two gallons at a time is efficient and cost effective. I get professional results every time. I bought and am currently using the first two gallons I purchased and then added it to my subscribe and save monthly orders for further cost reduction. I tried UV resin and it was awful. I’m sticking with this bc and of regular epoxy resin into the future. It does not release any fumes, either.

Great Resin Kit – When quality and Value for Money meets (not only for beginners)
The kit is amazing allowing you a smooth entry into the world of resin art – you have every thing you need in hand – 68oz crystal clear Epoxy with 16 Epoxy Resin Pigment, Foil Flakes and – and silicon mixing cups – this alone will save you so much money.The resin is very easy to use – the cure time is great – i work at night and in the morning it’s cured enough so i can take in out of the mold and letting is rest for full hardness. let me tell you that – i’ve re-order the kit!

Pretty good.
It works good, but the stir time is a bit longer than some. I stir for 4 minutes and it worked. I wish lids and bottles were different colors. In other words A could be white and B could be black. If you put the lid on the wrong bottle, it may be stuck there as the resin will set up.

Works exactly like described and cured crystal clear
This was my first time using an epoxy product and i was a little nervous. I also started with a large project and prob should’ve done something a little smaller to test the waters. I used this and mixed in separate container in equal portions, stirred for 3-4 minutes by hand and poured. I used a torch to pop bubbles as the resin started to cure and the next morning it was crystal clear and looked great. I will def buy this product again for any future epoxy products. It worked exactly like it said it would

You don’t get 2 gallons you get 2 small bottles very very disappointed.

Is not 2 gallons of Resin Like its states in the description. I only received 16 oz which is not 2 gallons. I am very disappointed with this.