Premium 3D Print Removal Tool Kit – Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 – Enhanced Version
$15.99
Related Products
Are you looking for a 3D print removal toolset with Solid, riveted handles that won’t come loose and start spinning, twisting or turning after use? Hardened stainless steel blades that are optimally flexible without being too flimsy and/or getting scratched and gouged by the print bed surface due to their softness? A knife tool with a sharpened front edge (flat bottom) for getting under even the most-adhered prints with ease? Ability to reach into the back under larger parts, sweep across and lever them off , as well as handle smaller, more delicate objects? Durable comfort handles with grips designed for a firm hold that feel good in the hand and look stylish too? Safe, rounded blades easier on your fingers, prints and printer surface? REPTOR 3D Print Removal Tools have been designed with all these aspects in mind.These tools are not your average repurposed painters putty knives with cramp rings that come loose or fall apart before long when used to remove 3D prints! This REPTOR toolset is designed to get even the most stubborn prints off the bed without distorting them or damaging the print bed surface. Both handles have solid rivets in them that will hold the blades in place and will not permit the blades to turn or yield. The knife with its 4.92″ blade and beveled front edge can be used to sweep across and reach into the back under larger parts and provide leverage to pop even a stubborn piece up while the spatula is thin and flexible enough to get under even the most delicate of objects without distorting them. They are the perfect duo – practical and durable, yet comfortable and stylish! Get yours now!
Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!
Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying
Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them
Stylish and useful; The smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts
Essential addition to your 3D Printer accessories; No more putty knives to remove prints. Doubles as a leveling tool to scrape off stuck-on plastic from the print bed
9 reviews for Premium 3D Print Removal Tool Kit – Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 – Enhanced Version
Add a review
$15.99
Alan M. –
Excellent Set
Recently got a resin 3D printer and used the tool that came with it to remove prints. It worked OK some of the time, but it ended up being a pain to use and I ended up scratching the bed on some of the more difficult prints. Looked around and got these to try. Excellent move on my part! These work incredibly well. They slide easily under the base layer and I can either pop the print off, or just slide the tool around a bit and the print falls off. This is definitely a tool to have. The tool that came with the printer is much thicker and wider, a putty knife in essence. These are thinner and easier to use. Since I have started using these, I have added no new scratches to my bed.If you have a resin printer, you should take a good look at these. I do not think you will be disappointed.
tampa03cobra –
Designed for Makers, 100x better than the cheap knock-offs (Prints Slide off like butter, see video)
Conclusion up front: This 3d print removal kit is nothing like the ones that come with printers, or that you buy at the local tool store. I purchased this based on a post somewhere in desperation and it will changed our entire resin printing workflow (seriously, a properly designed tool can make all the difference.)I rarely video review things, in this case I am in hopes other people get the chance to experience what I did. Your supports slide off like someone coated the build plate in butter. Well worth the price to try it for yourself (see the video for technique/examples). The liquid creates a vacuum seal (which is why it’s so hard to remove them), this disrupts that in an ingenious way, making it so much easier to get stubborn things off.You can tell this was designed by someone who has the same frustrations the rest of us did (You end up beating your build plate into a state of gouges and scratches trying to remove supports). The clever rounded bevel design combined with a strong metal alloy choice give you an experience one of those knock off’s from China simply can’t provide.Instructions:When removing supports that touch the build plate do as follows:1. Take the longer rounded scraper and ensure the bevel (it looks like a slant) is facing up.2. Gently slide it under the support, allowing it to break the liquid suction that is holding it down.3. Once you get under it you can just slide the entire thing off in one steady motion.My build plate has some serious battle scars, it got to the point I despised resin printing (it took so long to remove the supports, they would break and require so much work to clean out). This tool set has changed the entire workflow at our small company. We are losing less items to accidental damage, turning around prints faster for production, etc.I did have an occasion to ask a few after sales support questions, the vendor was amazing, you can tell he is passionate about this business and that he himself is a maker. The person who invented this has sat in our shoes, struggled our struggles. That’s why I believe rather than buying cheap imitations (that simply don’t work, you can’t copy this design without both the precision manufacturing and the proper materials.) Knock-offs break way too quickly (then leave scrapes all over your prints/bed.)
David –
Must-Have Tools for Anyone with a Resin Printer
These scrapers are some of the most useful tools I’ve ever purchased for 3D Printing. I use them for removing prints from a Resin printer (Elegoo Saturn 4 Pro), and they do the job flawlessly. They are a huge upgrade over the scraper that came with the printer, which was difficult to use because of its sharp corners, thickness, and flimsy blade.These Amervault tools are great for several reasons:- They are designed with rounded tips, so they are far less likely to scratch your build plate.- They are narrow, so you are able to get them underneath individual smaller prints with more precision.- The tips are tapered, sort of like a knife edge (but they’re not sharp!), which makes it easier to slide them between your prints and the build plate.- The metal blades are flexible enough to use at different angles, but sturdy enough that they don’t bend when you’re removing prints.- They are easy to clean (a quick spritz of IPA and a wipe-down with a towel, and you’re done in seconds!)Overall, this 2-piece kit is well-built, does exactly what it’s supposed to do, and is excellent value. After using them regularly for nearly a year, I have virtually no complaints. The only issue I’ve experienced is that some resin residue did get around the larger tool’s handle, which eventually caused the handle to crack and split open after the resin cured– but that’s mainly my fault for not keeping things as clean as I should, and the problem was easily solved by wrapping the handle in some duct tape.
Jim Peters –
Highly recommended
Very nice tools, perform as described making removing prints and do it well.
Thura –
After using many tools over the years this is my favorite. It is just sharp enough to jam in between the print and the print bed, but not sharp enough to really scratch the print surface. More tools i have bought proclaimed this, but they were all too dull for the job.Still have to see what the long term quality is, but so far it all seems to be of good quality.
FerF –
La recomiendo 100% para los aficionados a la impresion en 3d, ambas herramientas estan diseñadas de forma esquisita, se introducen facilmente entre la pieza y el plato de impresion ya que la punta es muy delgada, pero luego se va haciendo más gruesa para que sin movimientos forzados la pieza se despegue, ademas, ambas herramientas estan pensadas para no tener que introducirlas con ángulos forzados… una poque es muy larga y el mango que es mas grueso queda fuera del plato, y la otra por tener forma de L, asi que las usas paralelamente al plato sin dañarlo.
Mark –
High quality, durable, sharp enough to remove prints and not enough to cut you. Works perfect for my glass bed
kg –
High-quality tools that make print removal with both SLA and FDM almost-trivial.
hardy –
Points forts :Outils robustes et durables : Les matériaux de fabrication annoncés comme durables inspirent confiance pour une utilisation répétée.Prise en main confortable : Des utilisateurs mentionnent des manches confortables pour une meilleure maniabilité.Lames tranchantes : Des lames neuves et tranchantes permettent une séparation plus nette des impressions du plateau.Multifonctionnalité : Le kit pouvant inclure un couteau et une spatule, il offre une variété d’outils pour différents types de retrait.Points à prendre en compte avant l’achat :Informations limitées : En raison du manque d’informations car leur site ne fonctionne pas