YOOPAI Double-Sided Epoxy Resin Build Plate, 257x257mm 3D Printer Bed for Bambu Build Plate A1 X1 X1C/P1P/P1S 3D Printers
$14.63
Related Products
Product description
Easily Manage a Variety of Filaments 
This sheet is suitable for printing a variety of filaments. It is recommended to use PLA, PETG, and TPU on the EP surface, while the EP surface can be used with almost all filament types, including PLA, PETG, TPU, ABS, ASA, and Nylon. One YOOPAI Build Plate fulfill all your daily printing needs.
Make Every First Layer Perfect 
The new version YOOPAI double-sided build plate uses a more advanced spraying process than the previous generation. The coating is more uniform and has stronger adsorption force. No matter which side you use, you’ll get a perfect first layer.
Unique Textures Make Your Creations Special 
The diamond texture on the surface of EP can be replicated on the base of your creations. The texture of each area of the EP surface is randomly generated, meaning you get a unique model every time you print.
One-step Installation without Waiting Even 1 Minute 
Just place the EP with either side facing up according to your needs and attach it to the Bambu Lab printer’s built-in magnetic hot bed to start printing. The whole process only takes 3 seconds to complete. Let YOOPAI build plate instantly improve your printing results.
Item model number : YP24062803
Date First Available : July 5, 2024
Manufacturer : YOOPAI
ASIN : B0D8W8ZN35
Reliable and Cost-effective: This 3D printer bed is built to withstand the demanding conditions of continuous printing operations. The PEI surface accommodates most filaments including PLA, ABS, PETG, TPU, and Nylon. By investing in this dual-sided bed, you will gain two double the usage time, making it a cost-effective choice.
Simple Set-up: The build plate consists of just one parts – a flexible steel platform with double sided PEI coating. Since the hotbed of the Bambu Lab printers is built-in magnet, simply affix the PEI platform to the hotbed for instant printing without any complex setup procedures.
Excellent Adhesion: Each YOOPAI PEI+PEO sheet is equipped with two sides of textured PEI coating. You can easily print directly on either side without the need for glue or additional tools to ensure your model sticks firmly to the sheet. Both sides offer strong adhesion to the filaments of corresponding materials, allowing you to choose the appropriate side based on your printing requirements.
Effortless Removal: This 3D printer bed can endure the repeated heating cycles that occur during 3D printing. Its flexible surface allows for easy removal of prints once the heated bed cools down to room temperature. If a print still sticks, just detach the upper magnetic surface, flex the flexible surface, and watch the model easily detach and land in your hands.
Compatible 3D Prenter Models: With a size of 257*257 mm (10.12*10.12 inch), this build plate is compatible with Bambu Lab A1, X1, X1C, P1P, P1S and X1-Carbon Combo. Please confirm your printer model before purchasing. After installation, please ensure to re-level the print bed to enhance the printing quality.
13 reviews for YOOPAI Double-Sided Epoxy Resin Build Plate, 257x257mm 3D Printer Bed for Bambu Build Plate A1 X1 X1C/P1P/P1S 3D Printers
Add a review
$14.63
C&G C. –
Above average build plate, at a below average price, buy with confidence.
I own 3 of these, they are the best plate, at the best price, that I have found. Somewhere between a smooth and a textured surface I use them bare for PLA with no adhesion, no release issues. I have only tried glue for PETG and ASA, not bare, but once they are near room temperature, the print literally slides off. The durability of the coating is unlike anything I have used. The thickness is perfect, and the clean up very easily and do not stain like some plates I’ve used. I use them for my Bambu Lab machines, and in addition to everything else, the fit is spot on.
Justin Walker –
Best build plates for the money
Two for less than the price of one of the popular name brand light blue plates, and to be hoythese plates work better. The adhesion is so good it’s almost too good. But I’d rather have more difficulty removing everything off of the plate versus poor adhesion or failed prints.I have two of them and just ordered two more.
94_xj –
Low price, high quality
I bought this as a sacrificial build plate because my A1 was destroying build plates with the .2 nozzle. I’ve added some custom g-code that has rectified that issue and now this has remained my go-to. Bed adhesion is EXCELLENT and the finer texture makes detailed prints look excellent, especially when you’re not wanting a glossy finish like smooth plates create. This has been my go-to build plate for well over 6 months and has seen MANY prints in a P1S and A1. I highly recommend it.
Pappa Pots –
I’d buy another, works great!
This is now my favorite build plate by far. Excels against the Bambu gold textured plate. I peint in an air conditioned room and I think the thinner plate helps with the heat. I can reproduce several times and different models without having to clean it every job! Great adhesion using both PET and PETG. Great release when cool. Let me know if you’ve got one you need tested!! 😉
Luke –
Great plate.
What can I say, this plate is the perfect replacement for the printer, I got this for my p1s and will be getting another one for my a1. Holds petg like crazy. Simple swap out as it’s a direct drop in. Plus the green is nice, adds a little bit of a different look. I tried the blue plate competition, and this is so much better and cheaper. And has yet to fall apart.
restorick –
Great option for Bambu!
Fantastic plate! Using on my Bambu A1. No problem with adhesion, super easy to clean. Great value!
Richard C –
Works great – perfect for Bambu AMS TPU
I purchased this because of the low price -It is a lot thinner (and therefore more flexible) than other more expensive ones.My initial thoughts was that it might not be as durable and may get a permanent kink if it is flexed too much.In using it, that does not seem to be the case. Prints release easily with just moderate flexing.PLA prints fine without any glue and releases ok (as it should).What was not expected it that it is PERFECT for TPU -The biggest problem I’ve found with TPU is finding something that lets it stick to the plate, but will also let it release easily. I have had TPU prints that were almost impossible to remove. Guess what? I can print TPU (Bambu AMS TPU) on this plate without anything, and it releases easily after cooling – something I have not found with any other plates I have tried.Also I really like the very fine texture of this plate.I wish it had a plate identification code printed on it (I have been using the Bambu PEI Textured plate presets), but it is easy enough to find a code online and print a little sticker to put on it.
Steven M. –
One looks okay, the 2nd looks like deep gouges
I placed an order last month, the box seemed to arrive in good shape. However, the two plates were on top of each other, with not even a paper divider. One plate looks okay, the other has deep gouges where the top material is damaged. Very disappointing!It looks to me like a manufacturing defect, as the angle of these marks would be hard to achieve in such a small shipping box. Unless I got someone else’s return???
Benjamin Fehlhaber –
mit dem Haftspray eine sehr gute und unverzichtbare Druckplatte die im Preis Leistung nicht fehlen darf
芦屋太郎 –
普段、主にTPUで印刷しているのですが、とにかくPEIとかだと成形後の造形物のビルドプレートへの定着が強すぎて、端っこをなんとか剥がしたあとは、やっとこで力を入れてひっぺがすという具合でした。ただ、力が入りすぎて、造形部の一部がちぎれてしまうこともあり、これが結構大変だったのですが、このエポキシ樹脂ビルドプレートだと程よく定着し、ビルドプレートを曲げるだけで簡単に剥がれます。これのおかげで、ずいぶん作業がはかどるようになりました。ＴＰＵをメインに印刷する方は、今のところ、これがベストだと思います。
Sheldon Walker –
Great so far 20 prints realy good grip will update if not lasting
Average Joe –
Has been working excellent for last week. No complaints 👌
Maxim Mantel –
Die Platte scheint 1mm kleiner zu sein, als die originale Bambulab Platte.Außerdem “Drucken bei Raumtemperatur ohne heizen” ist schlicht falsch, denn da hat man ohne Ende warping.Irreführeden Beschreibung vom Hersteller.Sofern man etwas heizt, bei PLA 40 Grad und bei PETG 50 Grad, dann geht es halbwegs.Sowas sollte der Hersteller besser kommunizieren.Edit 20.11.2025:Der Verkäufer hat mich angeschrieben und sich für die Fehlinformationen entschuldigt.Und wird es korrigieren und in die Fachabteilung weiter geben.